Categories


BILLY TOWEL - NAVY BLUE TRU-KOTE

sinclairintl shooting rests bipods

Quick View
$24.99
 
    • View
      • BILLY TOWEL - NAVY BLUE TRU-KOTE

      • This special towel is the product of the imagination of Col. Billy Steven, gunsmith and benchrest shooter. The towel has pockets on three sides which hold weight tubes (removable for washing the towel). The weights keep the towel in place on the shooting bench when the wind is blowing and the raised edges keep your brass on the towel. Shooters who saw these towels all had the same comment. Wow! I need one of these. Available in navy blue only. Sinclair, Issue:5B, Page:169

SHOOTING REST FOOT PROTECTORS SINCLAIR INTERNATIONAL

sinclairintl shooting rests bipods

Quick View
$14.99
 
    • View
      • SHOOTING REST FOOT PROTECTORS SINCLAIR INTERNATIONAL

      • Preserve the footprint of your favorite Sinclair Shooting Rest with these Sinclair Rest-Feet Protectors. Shooting rest legs often wear and “round out” after heavy usage, travel, and transport when the leg points are exposed to contact with the elements. Keep your leg’s threads clean and protected from any damage too. The Sinclair Rest-Feet Protectors are machined from high density Delrin, are easy-to-install, and provide a lifetime of protection for your stainless leg points. Sinclair Rest-Feet Protectors include a set of three pieces and are available in two sizes: 1/2”-20 Thread - Fits all current model Sinclair Heavy Varmint and Competition Model rest legs 3/8”-16 Thread - Fits all early-model Sinclair, Hart, Bald Eagle and other shooting rests with 3/8”-16 legs

        Sinclair, Issue:5B, Page:161

SINCLAIR ALL-PURPOSE TOP REPLACEMENT BAG EDGEWOOD SHOOTING BAGS

sinclairintl shooting rests bipods

Quick View
$19.99
 
    • View
      • SINCLAIR ALL-PURPOSE TOP REPLACEMENT BAG EDGEWOOD SHOOTING BAGS

      • We've improved our All-Purpose rest top bag by making it from both high-quality garment weight leather and fine-grade, low friction Cordura. Use the soft leather side with talc or baby powder for wood stock and the Cordura side with bag wax or silicone spray for fiberglass and other synthetic material stocks.

        Note: Sand required to fill all bags. Sinclair, Issue:5B, Page:162

Benchtop Shooter Pads YAKPADS, LLC.

sinclairintl shooting rests bipods

Quick View
$9.99 - $18.99
  (94)
    • Check Price
      • Benchtop Shooter Pads YAKPADS, LLC.

      • Most shooters shoot much better when their body position is comfortable. These gel-filled elbow pads are designed for anyone shooting off the ground or from a bench. The high quality pads are made with smooth Lycra on one side and a tough non-skid material on the reverse. The inner core contains a non-bottoming gel which is comfortable and compliant, yet has a permanent memory. The shooter pads measure seven inches x seven and a half inches and are a little over one half inches thick.    04-171 Shooter Pad (Single) 04-175 Shooter Pad (Pair) Mini-Catalogs, Issue:03, Page:004 Sinclair, Issue:5B, Page:174

ACCURACY INTERNATIONAL MONOPOD ACCU-SHOT

sinclairintl shooting rests bipods

Quick View
$169.99
  (60)
    • Check Price
      • ACCURACY INTERNATIONAL MONOPOD ACCU-SHOT

      • The Accuracy International (ASAI) Monopod is designed specifically to fit the Accuracy International AE, AW and AICS systems. The ASAI is attached via an application specific nut without modification to the stock and is deployed and retracted with the press of a button. The knob folds up and retracts out of the way when not in use. It utilizes a Thumbnut to LOCK the unit into a fixed elevation. Like our other monopods, it’s constructed of the finest materials and built to the highest standards right here in the USA. Available in black only. The metal Quick Knob (QK) offers fine elevation adjustments and provides for a quick vertical height adjustment at the push of a button. Sinclair, Issue:5B, Page:173

M14/M1A SLING/BIPOD ADAPTER PLATE TANKS RIFLE SHOP

sinclairintl shooting rests bipods

Quick View
$39.99
  (23)
    • Check Price
      • M14/M1A SLING/BIPOD ADAPTER PLATE TANKS RIFLE SHOP

      • Enables Quick Change From Sling To Stud-Mounted BipodAll-steel adapter replaces your M14’s factory front sling swivel stud to let you mount a quick-detach swivel or a Harris-type bipod that attaches to a front sling stud. A fast, easy way to increase the versatility of your rifle. Comes with a QD sling swivel and all parts required for installation. Big Book Catalog, Issue:68, Page:257

EDGEWOOD SPACER FOR ORIGINAL REAR BAG EDGEWOOD SHOOTING BAGS

sinclairintl shooting rests bipods

Quick View
$27.99 - $34.99
  (35)
    • Check Price
      • EDGEWOOD SPACER FOR ORIGINAL REAR BAG EDGEWOOD SHOOTING BAGS

      • Boost the height of your rear bag with the Edgewood Rear Bag Spacer. Often times a 'higher' rear bag may be necessary to get 'lower' on the target, effectively bringing your muzzle height closer to the ground. We see this from time to time across the country at ranges that are built flat or you're shooting a bit downhill. The Edgewood Rear Bag Spacer is available in three sizes to fit Edgewood bags currently available: Original, Mini-Gater, and Gater. Sinclair, Issue:5B, Page:166

M1A/M14 ADAPTER HARRIS

sinclairintl shooting rests bipods

Quick View
$9.99
  (44)
    • Check Price
      • M1A/M14 ADAPTER HARRIS

      • This adapter will work on any M14 or M1A rifle with wood or polymer stock. With this adapter you can install a "Sling Swivel Stud" on your stock so you can attach any Harris Bipod to it. works with the M1A or M14 rifles with both Wood or Polymer stocks.  

STUKEYS STURDY SHOOTING BENCH & LEG CADDY STUKEY STURDY SHOOTING BENCHES

sinclairintl shooting rests bipods

Quick View
$49.99 - $679.99
  (96)
    • Check Price
      • STUKEYS STURDY SHOOTING BENCH & LEG CADDY STUKEY STURDY SHOOTING BENCHES

      • This ultra-stable, portable shooting bench by Stukeys is a must-have for any benchrest rest shooter. The spacious, cabinet-grade ¾" laminate plywood top measures 40" long by 32" wide and features cutouts to accommodate right- or left-handed shooters. Three powder-coated steel legs lock quickly to the heavy-duty angle iron frame using a quick-connect, no-toolsrequired system that forms the secure, wobble-free shooting platform – even on irregular terrain. Weighing approximately 65 lbs. and standing 35½" tall, the bench disassembles easily into two manageable units – top (30 lbs.) and leg bundle (35 lbs.) – that stow conveniently in most vehicle trunks. The optional Leg Caddy, built from durable polymer and marine-grade bungee, retains the legs in a compact bundle and makes them even easier to transport. Sinclair, Issue:3A, Page:180

BULLSHOOTER PISTOL REST O.H. PRODUCTS

sinclairintl shooting rests bipods

Quick View
$54.99
  (27)
    • Check Price
      • BULLSHOOTER PISTOL REST O.H. PRODUCTS

      • Multiple Use Design Has Outstanding VersatilityLightweight, polyethylene rest is easy to carry and set up. Has a wide "footprint" for excellent stability. Use it as a rest for load testing, distance shooting, or boresighting and a vise for maintenance and cleaning. Padded barrel rest adjusts to fit any size handgun. Big Book Catalog, Issue:68, Page:394 New Product Supplement, Issue:511, Page:000

Linear bubble level SINCLAIR INTERNATIONAL

sinclairintl shooting rests bipods

Quick View
$4.99
  (60)
    • Check Price
      • Linear bubble level SINCLAIR INTERNATIONAL

      • This small (one inch x three eights inch) tubular level is the perfect size to glue/epoxy to the edge of your rest top. The level comes with a snap-in flat mounting flange, and has a high visibility yellow vial. As long as your rest top is level side to side and your scope is on straight, you will eliminate any cant effect. Sinclair, Issue:5B, Page:163

SINCLAIR SHOOTING REST LEGS SINCLAIR INTERNATIONAL

sinclairintl shooting rests bipods

Quick View
$14.99 - $39.99
  (64)
    • Check Price
      • SINCLAIR SHOOTING REST LEGS SINCLAIR INTERNATIONAL

      • These machined stainless steel legs fit the new model Sinclair Competition Shooting Rest and the Sinclair Heavy Varmint Rest. They quickly thread in to replace damaged or missing legs, or to serve as backup parts in your shooting kit. They feature a deeply scalloped, anodized aluminum cap and a knurled steel adjustment ring to give you precise tactile control over elevation adjustments. ½"x20 tpi threads. Will not fit older generation Sinclair rests, or any other manufacturer’s rests. Sinclair, Issue:5B, Page:161

SMALL BENCH BAG DOG-GONE-GOOD

sinclairintl shooting rests bipods

Quick View
$106.99
  (37)
    • Check Price
      • SMALL BENCH BAG DOG-GONE-GOOD

      • The Small Bench Bag sits a pistol or rifle barrel about 8" above the bench. This bag works well with any rifle, but especially the AR-15, 10-22's, and contender style pistols. It is an excellent design for target shooting or hunting. Some pistols with muzzle brakes may need a blast shield to keep from burning the bag. The bag is 8" long, 12" wide, and 8" high, and weighs about 10 pounds. Includes a carry strap. Sinclair, Issue:5B, Page:164

Otto Rear Bag Stabilizer SINCLAIR INTERNATIONAL

sinclairintl shooting rests bipods

Quick View
$27.95
  (99)
    • Check Price
      • Otto Rear Bag Stabilizer SINCLAIR INTERNATIONAL

      • This bag stabilizer was made to place under your rear bag to provide additional stability. The doughnut shape bag fits underneath Protektor Model or Bald Eagle rear bags. Some rear bags tend to rock due to the rounding they get with use, and the bag stabilizer prevents the rocking. The bag stabilizer also raises the rear bag for those shooting stocks with a near straight comb such as a Borden, TMBR, or Scoville stock. Legal for use in NBRSA and IBS registered benchrest shoots. Made of Leather (suede). Note: Sand required to fill bag. Sinclair, Issue:5B, Page:169

SINCLAIR GENERATION II ALL-PURPOSE TOP SINCLAIR INTERNATIONAL

sinclairintl shooting rests bipods

Quick View
$19.99
  (29)
    • Check Price
      • SINCLAIR GENERATION II ALL-PURPOSE TOP SINCLAIR INTERNATIONAL

      • If you are looking for a versatile rest top that is easily adjusted for nearly any forend width (up to 3½") this is the top you need. Our All-Purpose (A/P) rest top features quick adjust levers on the bag squeezing side plates to shorten the time needed to switch from rifle to rifle. The updated dual-sided sandbag (included - not filled) is reversible from leather to Cordura for use with wood or fiberglass/synthetic stocked rifles. The new forend stop is adjustable for length and height. Includes a ¼"-20 screw to mount to our Sinclair rest posts or any other rest post with ¼"-20 mounting threads. Sinclair, Issue:5B, Page:162

EDGEWOOD HAND REST EDGEWOOD SHOOTING BAGS

sinclairintl shooting rests bipods

Quick View
$67.99
  (36)
    • Check Price
      • EDGEWOOD HAND REST EDGEWOOD SHOOTING BAGS

      • This Hand Rest Bag is excellent for resting your hand or wrist on if you shoot benchrest free recoil style. One end is sloped slightly, so this bag would work well as a rear bag for hunting or varmint rifle in the field. The Hand Bag is high quality grained leather with a stiff, double layer bottom so it sits flat and it has the new bottom pocket tabbed fill tube. Bag is seven and a half inches long, five inches wide and two and three fourths inches tall when filled full - height would be much less and the bag very soft if less sand were used. Note: Sand is required to fill this bag. Sinclair, Issue:5B, Page:166

EDGEWOOD ELBOW PAD EDGEWOOD SHOOTING BAGS

sinclairintl shooting rests bipods

Quick View
$74.99
  (45)
    • Check Price
      • EDGEWOOD ELBOW PAD EDGEWOOD SHOOTING BAGS

      • Jack Snyder is a benchrest shooter. He also is the owner of one of the most respected and well know bridleworks in the country. These premium bags and shooting accessories from Edgewood Leather are innovative in design, made of absolutely the best materials available and will hold up under constant competitive use. This Elbow Pad will do a lot more than just keeping the concrete bench from scraping your elbow.. The formed leather U shape, non-skid bottom and stitched nylon insert will help you with consistent positioning which is part of producing small groups. These pre-filled pads are comfortable, durable and they work.   Sinclair, Issue:5B, Page:166

CUSTOM RABBIT EAR REAR BAGS PROTEKTOR

sinclairintl shooting rests bipods

Quick View
$49.99
  (77)
    • Check Price
      • CUSTOM RABBIT EAR REAR BAGS PROTEKTOR

      • These rabbit ear style rear bags are constructed of heavy leather with a thick double layer of leather on the bottom for extra stability and durability on the bench. The taller rabbit ears provide extra stability and more stock contact than bunny ears. May not be suitable for stocks with larger cheekpieces. Note: Sand is required to fill these bags. Sinclair, Issue:5B, Page:168

LOW PROFILE CUSTOM BUNNY EAR REAR BAG PROTEKTOR

sinclairintl shooting rests bipods

Quick View
$34.99
  (35)
    • Check Price
      • LOW PROFILE CUSTOM BUNNY EAR REAR BAG PROTEKTOR

      • These low profile rear bags feature the same thick bottoms and all-leather constructions as the BAG18 and BAG19 only one inch shorter to accommodate stock designs requiring a shorter rear bag. Note: Sand is required to fill these bags. Sinclair, Issue:5B, Page:168

NO. 9 LARGE OWL EAR FRONT BAG PROTEKTOR

sinclairintl shooting rests bipods

Quick View
$19.99
  (25)
    • Check Price
      • NO. 9 LARGE OWL EAR FRONT BAG PROTEKTOR

      • Smooth, Top Grain Leather-U.S. MadeGorgeous, handmade, smooth leather bench bags that allow rifle to slide freely during recoil. Made from 3-3½ oz., top grain cowhide, finished in a beautiful cork color. Bag bottoms made from same leather but sueded for a good grip on rest or bench. DuPont nylon stitching wont rot or mildew. Bags with a C sufix have a smooth sliding, Cordura bag with a suede base and tie-down tabs to stay in position on the rest. Brass eyelets wont corrode or abrade the tie-down, Superb! NOTE: Bags shipped empty. Fill with sand or lead shot that you provide. No. 9 Large Owl Rear Front Bag is nearly twice as wide, front to rear, as narrower bags. Good, all-around bag for sporter and varmint forends. Big Book Catalog, Issue:68, Page:395 New Product Supplement, Issue:524, Page:000

PICATINNY BIPOD ADAPTER BROWNELLS

sinclairintl shooting rests bipods

Quick View
$49.99
  (50)
    • Check Price
      • PICATINNY BIPOD ADAPTER BROWNELLS

      • Provides Secure Bipod Attachment For Railed HandguardsLow-profile adapter clamps solidly to any Picatinny rail handguard to provide a secure mounting point for bipods that attach to sling swivel studs. Increases your accessory mounting options without making permanent alterations to gun. Stud and base are precision machined from a single billet of high-grade 6061 T6 aluminum for maximum strength to handle the rigors of tactical deployment. Two robust cross-bolts and oversized, slotted hex nuts of heat-treated 4140 carbon steel lock the full-contact clamping bar tightly to the rail, and ensure the mount wont shift position even under heavy recoil. Also accepts a standard quick-release sling swivel, for rapid transition from bipod operation to sling use. AR-15, Issue:11, Page:103 Big Book Catalog, Issue:68, Page:397 Law Enforcement / Police Store, Issue:08, Page:026

LIGHTWEIGHT QUICK DETACH BIPOD SMITH ENTERPRISE

sinclairintl shooting rests bipods

Quick View
$269.99
  (80)
    • Check Price
      • LIGHTWEIGHT QUICK DETACH BIPOD SMITH ENTERPRISE

      • This lightweight bipod from Smith Enterprise attaches to any MIL-STD 1913 Picatinny rail and features aluminum legs that instantly extend at the push of a button. Six precision-cut locking notches allow you to adjust elevation from 7" to 9", while the aluminum ski feet give excellent stability on any surface or terrain. Steel, TiG-welded main body stands up to hard use and helps ensure a long service life. Two adjustment nuts help you find the perfect amount of tension for the rail attachment, and the right-side throw lever enables instant mount and dismount. Legs fold forward or backward for easy carry, even when extended. Big Book Catalog, Issue:68, Page:397 Sinclair, Issue:5B, Page:172

VERSA POD ACCESSORY RAIL KFS INDUSTRIES

sinclairintl shooting rests bipods

Quick View
$66.99
  (52)
    • Check Price
      • VERSA POD ACCESSORY RAIL KFS INDUSTRIES

      • M1A/M14 picatinny style rail replaces the existing front sling swivel. 3.25" long. Includes hardware. Mounts on the synthetic stock only with 10-32 tapped holes.

BIPOD SPEEDY KNOB TANKS RIFLE SHOP

sinclairintl shooting rests bipods

Quick View
$7.99
  (78)
    • Check Price
      • BIPOD SPEEDY KNOB TANKS RIFLE SHOP

      • Fast, No-Tool Knob For Harris BipodInstall or remove your Harris Bipod in just seconds by adding this easy-to-turn thumb knob. Mounts in place of the Harris mounting/attachment screw. Can also be used with the Harris #6A Adapter for faster bipod setting on a forend rail. Big Book Catalog, Issue:68, Page:398

SINCLAIR LIGHTWEIGHT REST COMPLETE W/ BASIC TOP SINCLAIR INTERNATIONAL

sinclairintl shooting rests bipods

Quick View
$129.99
  (2)
    • Check Price
      • SINCLAIR LIGHTWEIGHT REST COMPLETE W/ BASIC TOP SINCLAIR INTERNATIONAL

      • We designed our Lightweight Rest for shooters who needed a lighter, more economical option to a standard weight cast iron rest tripod. The Lightweight tripod is machined aluminum, and the leg screws and T-handle are lightened to produce a weight savings of over 11 pounds from our standard rests. These Lightweight rest are ideal for F-Class shooters, field shooters, sight in sessions and plinking. Our Lightweight Rests accept all Sinclair rest tops and accessories including F-Class extended leg screws and Speed Screw. This lightweight rest includes our basic top which accepts all Protektor owl ear front bags with simple tie-on attachment. This rest if the choice of shooters and hunters who want a rest they can use for sighting in rifles or take to the field. Front bags (not included) are easily switched for changing rifle styles. Sinclair, Issue:5B, Page:161

STACK AND SHOOT SNUG FIT

sinclairintl shooting rests bipods

Quick View
$49.99
  (8)
    • Check Price
      • STACK AND SHOOT SNUG FIT

      • This unique bench bag set consists of 4 separate bags, two filled bags and 2 solid foam sections. The four bags allow for multiple height combinations. Four Separate Bags Multiple Height Combinations Top Bag Provides Soft, Padded Rifle Rest Bottom Slip-Resistant Surface On Base Bag Filled Top And Bottom Sections For Added Stability Comes With Handle Carry Bag, Accommodates All 4 Sections Lighter Weight Than Most Bench Bags, The 2 Middle Sections Are Foam

BAG FILLING FUNNEL FORSTER

sinclairintl shooting rests bipods

Quick View
$16.99
  (4)
    • Check Price
      • BAG FILLING FUNNEL FORSTER

      • If you have ever struggled to fill a sandbag for a shooting rest, you know just how good an idea this is. The Kwik-Fill Sandbag Filler helps you get the sand in the bag instead of on the ground. It's a simple system that features a durable, compact funnel with a special long drop tube. Sinclair, Issue:5B, Page:163