Categories


STACK AND SHOOT SNUG FIT

sinclairintl shooting rests bipods

Quick View
$49.99
 
    • View
      • STACK AND SHOOT SNUG FIT

      • This unique bench bag set consists of 4 separate bags, two filled bags and 2 solid foam sections. The four bags allow for multiple height combinations. Four Separate Bags Multiple Height Combinations Top Bag Provides Soft, Padded Rifle Rest Bottom Slip-Resistant Surface On Base Bag Filled Top And Bottom Sections For Added Stability Comes With Handle Carry Bag, Accommodates All 4 Sections Lighter Weight Than Most Bench Bags, The 2 Middle Sections Are Foam

BAG FILLING FUNNEL FORSTER

sinclairintl shooting rests bipods

Quick View
$16.99
 
    • View
      • BAG FILLING FUNNEL FORSTER

      • If you have ever struggled to fill a sandbag for a shooting rest, you know just how good an idea this is. The Kwik-Fill Sandbag Filler helps you get the sand in the bag instead of on the ground. It's a simple system that features a durable, compact funnel with a special long drop tube. Sinclair, Issue:5B, Page:163

STANDARD REAR BAG PROTEKTOR

sinclairintl shooting rests bipods

Quick View
$19.99
 
    • View
      • STANDARD REAR BAG PROTEKTOR

      • This rear bag is primarily used when the shooter is not using a mechanical front rest. Most often used with BAG07 as a front bag. Bag size is five inches wide by six and three fourths inches long and two and five eights inches high at the front end then tapers to the rear to match the shape of the rifle stocks. Note: Sand is required to fill this bag.

        Sinclair, Issue:5B, Page:167

SINCLAIR SHOOTING REST ACCESSORIES SINCLAIR INTERNATIONAL

sinclairintl shooting rests bipods

Quick View
$15.99 - $39.99
  (52)
    • Check Price
      • SINCLAIR SHOOTING REST ACCESSORIES SINCLAIR INTERNATIONAL

      • Sinclair Competition Rest Post, 1” Do you ever go to the range with more than one rifle? To avoid adjusting your shooting rest top to accommodate different sized rifle forends, shooters often purchase an additional shooting rest top, post, and handwheel, allowing a quick-change without any adjustment or assembly. Shoot your wide forend varmint gun and then switch tops to sight in your favorite lightweight hunting rifle. Post is 1-14” threaded stainless steel for use with the Sinclair Competition Rest series only. The handwheel is powder coated aluminum with a stainless steel threaded insert designed for a gall-free lifetime of use. Handwheel utilizes 1-14” threads and is designed for use with the Sinclair Competition Rest series only. Sinclair Competition Forend Stop Upgrade your existing Sinclair Rest top with our Sinclair Competition Forend Stop. The Sinclair Competition Forend Stop is fully adjustable for length (fore and aft), height, and cant. It works with current production Generation II rest tops (Benchrest and All-Purpose). Made with stainless steel fasteners and a Delron stop knob, it’s built for a lifetime of use. Sinclair, Issue:5B, Page:163

PRO-SERIES CUSTOM SHOOTING REST BULLS BAG

sinclairintl shooting rests bipods

Quick View
$129.99
  (73)
    • Check Price
      • PRO-SERIES CUSTOM SHOOTING REST BULLS BAG

      • Combines higher elevation with easy portability, and features Bulls Bags’ “butterfly” hinge action that grips the rifle securely for less muzzle jump. Low-center-of gravity “H” design has a cradle height of approximately 8" for use with longer detachable magazines and pistol-style grips, making this an excellent choice the AR-15 shooter. Pre-filled with dry media, the attractive, “tree” camouflage pattern 900 Denier polyester body has a 2 mil thick coating for UV protection. Black suede top provides an excellent gripping surface that won’t scratch the stock or barrel. Wide footprint increases shooting stability for increased accuracy when used correctly. 10" long. 30 lbs. wt. Ships directly from manufacturer. Sinclair, Issue:5B, Page:169

EDGEWOOD DEAD BOTTOM EDGEWOOD SHOOTING BAGS

sinclairintl shooting rests bipods

Quick View
$39.99 - $41.99
  (21)
    • Check Price
      • EDGEWOOD DEAD BOTTOM EDGEWOOD SHOOTING BAGS

      • The Edgewood Dead Bottom works to stabilize the rear bag and provide a “dead” bottom stable bag set up. This also enables the shooter to achieve an additional ¾" to 7/8" rear bag height. Each Dead Bottom Bag is manufactured from soft suede leather. Dead Bottom Bags do not come filled. Sinclair, Issue:5B, Page:166

AR-15 BIPOD ADAPTER HARRIS

sinclairintl shooting rests bipods

Quick View
$12.99
  (71)
    • Check Price
      • AR-15 BIPOD ADAPTER HARRIS

      • All Adapters fit either 1A2 or S Series bipods. Fits AR-15 round handguard. Includes sling Swivel. AR-15, Issue:09, Page:099 Brownells Christmas , Issue:5X, Page:016 Big Book Catalog, Issue:68, Page:396 Law Enforcement / Police Store, Issue:13, Page:013 Mini-Catalogs, Issue:13, Page:009 New Product Supplement, Issue:513, Page:000

VERSA POD ADAPTERS KFS INDUSTRIES

sinclairintl shooting rests bipods

Quick View
$29.99 - $46.99
  (47)
    • Check Price
      • VERSA POD ADAPTERS KFS INDUSTRIES

      • Tactical & Hunting Shooting Rest SystemMounting Adapters let you change your Versa Pod’s mounting system and feature an integral hand stop for a comfortable hold, plus a push-button, QD sling swivel. AR-15, Issue:10, Page:101 Big Book Catalog, Issue:68, Page:396 Law Enforcement / Police Store, Issue:08, Page:026 New Product Supplement, Issue:551, Page:003

BIPOD RAIL ADPATER HARRIS

sinclairintl shooting rests bipods

Quick View
$9.99
  (16)
    • Check Price
      • BIPOD RAIL ADPATER HARRIS

      • All Adapters fit either 1A2 or S Series bipods. AR-15, Issue:11, Page:103 Brownells Christmas , Issue:2X, Page:012 Big Book Catalog, Issue:68, Page:396 Law Enforcement / Police Store, Issue:03, Page:036 Mini-Catalogs, Issue:13, Page:009 New Product Supplement, Issue:525, Page:000

HEAVY DUTY ADJUSTABLE BI-POD TAC-SHIELD

sinclairintl shooting rests bipods

Quick View
$34.99 - $39.99
  (49)
    • Check Price
      • HEAVY DUTY ADJUSTABLE BI-POD TAC-SHIELD

      • Adjustable shooting heights Durable hard finish Re-inforced tension springs Precision tension leg locks Swivel stud or adapter adjustment Spring assist leg retraction Matte black finish  

HEAVY DUTY PIVOTING ADJUSTABLE BI-POD TAC-SHIELD

sinclairintl shooting rests bipods

Quick View
$43.99 - $49.99
  (9)
    • Check Price
      • HEAVY DUTY PIVOTING ADJUSTABLE BI-POD TAC-SHIELD

      • Pivoting Bi-Pods offer side to side pivot capabilities for uneven terrain with a quick adjustment pivot lever. The precision leg locks, offer secure variable length adjustment for each leg, accomodating terrain or surface variations. Each leg offers an additional fast extension that locks in place. On the bottom of both legs, ribbed grip caps provide a secure and steady rest. Legs retract quickly and positively with spring return release buttons.

FIELD BAGS DOG-GONE-GOOD

sinclairintl shooting rests bipods

Quick View
$28.99
  (71)
    • Check Price
      • FIELD BAGS DOG-GONE-GOOD

      • The Dog-Gone-Good Field Shooting Bags are great tools to have when shooting at the range or 'in the field' hunting. Used as a rear bag, it can be turned on the side (2 inch), edge (3 inch), or end (4 inch) to achieve the desired height while shooting. Each bag includes a belt loop carry-strap and is made from premium 1000 denier cordura nylon. Bags are available in small (2 inch x 3 inch x 4 inch) and large sizes (3 inch x 4 inch x 5 inch). Polypropylene filled to keep your field gear lightweight. Camouflage colored. Sinclair, Issue:5B, Page:164

AR-15/M16 ADVANCED COMBAT BIPOD TANGODOWN

sinclairintl shooting rests bipods

Quick View
$219.99
  (94)
    • Check Price
      • AR-15/M16 ADVANCED COMBAT BIPOD TANGODOWN

      • Fast, Simple, No-Fail Design With Variable Height AdjustmentSometimes the simplest design works the best. This compact bipod has legs that fold down and back up with the push of a button, silently and smoothly, allowing you to stay focused and on target. Individual leg height is set with a recessed push-button that totally eliminates any chance of an accidental release. Legs are preset for the optimum traverse angle and left/right cant; will never require adjustment. Non-slip, molded feet grab and hold the surface, so you wont drift off target during rapid fire. Minimum leg length is 8" from bottom of rail, adjustable in three positions up to 2" longer to fit individual shooters. Machined aluminum base with durable, polymer composite legs. Secures to picatinny rail with steel latch and Allen head screws. Includes wrench. AR-15, Issue:11, Page:103 Big Book Catalog, Issue:68, Page:397 Law Enforcement / Police Store, Issue:08, Page:026 New Product Supplement, Issue:602, Page:028

LEATHER REST BAGS HYSKORE

sinclairintl shooting rests bipods

Quick View
$12.99 - $21.99
  (49)
    • Check Price
      • LEATHER REST BAGS HYSKORE

      • Top grain cowhide, double-stitched for durability and pre-filled for a no-hassle rest that provides solid support for the forend or buttstock. Suede bottom prevents the rest from slipping at the wrong time. Comes filled with lightweight, non-organic plastic-pellet media that won’t decompose, compress, or absorb moisture. Zippered fill ports with internal flaps let you add, remove, or change media any time. Choose the small, portable Universal bag with a wide “V” or the longer Rabbit Ear bag. Big Book Catalog, Issue:68, Page:394 Sinclair, Issue:5B, Page:169

STANDARD FRONT BAG PROTEKTOR

sinclairintl shooting rests bipods

Quick View
$26.99
  (69)
    • Check Price
      • STANDARD FRONT BAG PROTEKTOR

      • Smooth, Top Grain Leather-U.S. MadeGorgeous, handmade, smooth leather bench bags that allow rifle to slide freely during recoil. Made from 3-3½ oz., top grain cowhide, finished in a beautiful cork color. Bag bottoms made from same leather but sueded for a good grip on rest or bench. DuPont nylon stitching wont rot or mildew. Bags with a C sufix have a smooth sliding, Cordura bag with a suede base and tie-down tabs to stay in position on the rest. Brass eyelets wont corrode or abrade the tie-down, Superb! NOTE: Bags shipped empty. Fill with sand or lead shot that you provide. Standard Front Bag can be used on top of a 2" thick wood block. Good for sporter to varmint forends. Big Book Catalog, Issue:68, Page:395

COMMON RADIUS FRONT BAG EDGEWOOD SHOOTING BAGS

sinclairintl shooting rests bipods

Quick View
$74.99
  (11)
    • Check Price
      • COMMON RADIUS FRONT BAG EDGEWOOD SHOOTING BAGS

      • A new offering from Edgewood Shooting Bags, our slick material is an option that can be substituted on the contact surfaces (ears) of our rear bags and select front bags. The reflective surface of this material is impregnated with microscopic glass beads and backed with a reinforced fabric. This combination yields an extremely smooth surface along with the durability and longevity that has come to be expected from an Edgewood bag. There is no longer a need to coat your bag with talcum powder or cover it with used dryer sheets to achieve extremely smooth and rapid follow-up shots. This material allows shooters the best advantage possible to land all their shots on target before the wind changes. Bag ships unfilled.    

BIPOD RAIL ADAPTER PRO MAG

sinclairintl shooting rests bipods

Quick View
$20.99
  (70)
    • Check Price
      • BIPOD RAIL ADAPTER PRO MAG

      • Clamps To Bottom Handguard Rail For Installation Of Swivel-Mounted BipodMachined aluminum mount clamps to Picatinny handguard rail to provide a secure attachment point for a swivel-stud mounted Harris or ATK folding bipod. Knurled, steel crossbolt and locking bar can be quickly tightened with two fingers, or secure the rail with a slot-head screwdriver for solid, no-slip operation. Steel swivel rotates 360°. AR-15, Issue:10, Page:102 Big Book Catalog, Issue:68, Page:398

TWO-STITCH BUNNY EAR REAR BAGS PROTEKTOR

sinclairintl shooting rests bipods

Quick View
$52.99
  (15)
    • Check Price
      • TWO-STITCH BUNNY EAR REAR BAGS PROTEKTOR

      • These bags are approximately three and five eights inches tall from base to bottom of ears with two rows of stitching. We've found that the newer stock styles roll around on top of single stitch bags for lack of contact and have a tendency to wiggle between the ears in three stitch bags. The two rows of stitching between the ears on these bags offer the shooter the best combination of contact and stability. Note: Sand is required to fill these bags. Sinclair, Issue:5B, Page:168

ATLAS BIPOD ACCURACY INTERNATIONAL SPIGOT ADAPTOR ACCU-SHOT

sinclairintl shooting rests bipods

Quick View
$69.99
  (84)
    • Check Price
      • ATLAS BIPOD ACCURACY INTERNATIONAL SPIGOT ADAPTOR ACCU-SHOT

      • The Atlas Accuracy International Spigot (AAIS) Part number BT19 – Is designed for use with the BT10-NC Atlas Bipod that mounts directly to the AAIS which plugs into the Accuracy International AI/AICS stocks utilizing the factory retention/release mechanism. The AAIS is constructed from 6061T6 Aluminum with a type II hard coat anodize mated with an alloy steel Spigot that is finished with a Manganese Phosphate. The AAIS weighs approximately 4.7 ounces is proudly made in the USA. Big Book Catalog, Issue:68, Page:395

CALDWELL SHOOTING ACCESSORIES- MATRIX CALDWELL SHOOTING SUPPLIES

sinclairintl shooting rests bipods

Quick View
$45.99
  (35)
    • Check Price
      • CALDWELL SHOOTING ACCESSORIES- MATRIX CALDWELL SHOOTING SUPPLIES

      • Matrix- The one rest that does it all. Ulta rigid 2-piece sliding frame adjusts to fit any gun Innovative new spring loaded elevation system allows for fast one handed, no wobble adjustment Open central channel accomodates detachable magazines and lever action guns Convenient storage compartment lid doubles as a handgun base  The highly versatile Matrix combines great new features and rock solid stability in an affordable rest. Central tot eh design is the innovative, ultra rigid U-channel frame, quickly adjusting in length for the perfect fit with any gun while remaining perfectly stable. The two piece sliding frame incorporates an open central channel with plenty of clearance for hi-capacity detachable magazines (AR style guns) as well as lever action guns. A convenient storage area incorporated into the front of the base features a removable lid that adds additional clearance when detached but also doubles as a rubberized rear support surface for firing handguns when left in place. Another key feature is the all new innovative front elevation system. A spring loaded tension mechanism and height adjustment knob allow for fast, one handed elevation adjustments, keeping the front cradle wobble free throughout the entire vertical range. Overmolded front and rear supports protect the guns finish but are firm enough to prevent any give or play. Shooters will also enjoy the versatility of converting the Matrix into a compact front rest be removing the rear portion of the frame. Weather used a s a front rest or as a full length rest the Matrix provides stability that will deliver maximum accuracy potential.   

DOG GONE GOOD LARGE FRONT BAG DOG-GONE-GOOD

sinclairintl shooting rests bipods

Quick View
$99.99
  (22)
    • Check Price
      • DOG GONE GOOD LARGE FRONT BAG DOG-GONE-GOOD

      • The large bench bag accommodates rifles with forearm stocks up to 2½". Sits a barrel 8" off the bench. Ideal for target shooting and for use with hard-kicking rifles as it takes almost all the recoil out of a large caliber rifle when a piece of non-skid rubber shelf liner is put between the rifle and the leather cradle, and where the bottom legs of the bag are spread. The bag is 16" long. 12" wide, 8" high, and weighs about 23 pounds. This bag can be used for hunting, but is primarily intended for range work. Includes a carry strap. Sinclair, Issue:5B, Page:164

3-PAK FOR GEN 2 PMAG MAGPOD

sinclairintl shooting rests bipods

Quick View
$19.99
  (80)
    • Check Price
      • 3-PAK FOR GEN 2 PMAG MAGPOD

      • Compatible with Gen2 MOE® (or older) PMAG® Patented design Durable 15% Glass Fiber reinforced PA6 material Double injection molded TPU basepad for improved traction on hard surfaces 3-PACK in printed polybag  

BOG-POD® SHOOTING STICKS BOG GEAR LLC

sinclairintl shooting rests bipods

Quick View
$35.99 - $114.99
  (68)
    • Check Price
      • BOG-POD® SHOOTING STICKS BOG GEAR LLC

      • Lightweight, Portable Bipods Provide The Ultimate Shooting Rest Lightweight aluminum legs and a high-strength polymer cradle combine to offer the ultimate shooting rest in the field or at the range. Cradle swivels 360 degrees for easy horizontal corrections without binding or twisting. Rubber feet prevent slippage or can be removed to expose carbide tips for a better grip on hard ground or ice. Telescoping legs stay open with a turn of the twist lock. Legs lock together for easy transport. Dense foam leg covers ensure a non-slip handhold. Sportsman Bipod is designed for kneeling and sitting positions only; lightweight for easy carry in the field. Red/Camo Legged Devil™ Tripod features three adjustable legs for a rock-steady platform. Adjusts for kneeling to standing. Inch marks on legs for fast, return setups. Big Book Catalog, Issue:68, Page:396 New Product Supplement, Issue:641, Page:015

SINCLAIR COMPETITION SHOOTING REST NON-WINDAGE SINCLAIR INTERNATIONAL

sinclairintl shooting rests bipods

Quick View
$69.99 - $549.99
  (62)
    • Check Price
      • SINCLAIR COMPETITION SHOOTING REST NON-WINDAGE SINCLAIR INTERNATIONAL

      • The Sinclair Competition Shooting Rest is a result of our staff and our customer’s years of shooting experience on the firing line, and in the field. We’ve incorporated the best design ideas, materials, and craftsmanship to present you with a shooting platform that rivals any windage rest available today. Whether you’re competing in a benchrest discipline, F-Class, or wringing the most accuracy from your favorite shooting rig, the Sinclair Competition Rest offers the most versatile fit, function, and features in one complete package. Do not work with the 749-013-833 speed screw on the Sinclair Competition Rests. NOTE: You will need to order a front bag in addition to the rest. We recommend the Protector Leather/Cordura or the Edwood Standard Front Bags. Heavy and Compact The Sinclair Competition Rest’s foundation begins with a one inch, solid steel base plate with a durable granite powder coat finish. This enables us to achieve a massive unit – over 30 pounds - with the lowest center of gravity, combined with a footprint that’s no larger than other tripod rests currently on the market. It’s nearly twice as heavy as our closest competitor. Mobile Most shooting rests by design, are awkward and difficult to manage and maneuver. We solved this by machining a carry handle into the base plate for easy transport, making the Sinclair Competition Rest one of the most mobile units available,in spite of its enormous weight. No tacky looking handles or impossible two-arm lift methods are needed. Effortless Operation The Sinclair Competition Rest has the windage operation built directly into the base plate. It incorporates dual sets of twin tapered roller bearings for an effortless, non-binding windage operation. The oversized windage control knob is positioned near the rear speed screw where simultaneous one-handed adjustment is easily achievable. Nearly four feet of windage adjustment is offered at 100 yards – enough for any bench shooting discipline. The oversized, fluted handwheel also offers smooth vertical adjustment with the aid of a thrust bearing. A non-windage-adjustable model is available for shooters who prefer to adjust windage off the rear bag or do not have a need for the windage adjustable base block. Ambidextrous Design The unique construction of this windage unit platform enables an entirely ambidextrous set-up for right or left handed shooters. The post, center column, controls and windage adjustment disassemble and reassemble on the opposite side, for a completely mirrored, left hand use. Hardware for Hard Wear The Sinclair Competition Rest includes upgraded hardware: a beefed up center column (1.95" up from 1.375"); threaded post (1" diameter up from ¾"); leg screws (½" diameter up from 3⁄8"); and large diameter fluted speed screw – all made from high grade stainless steel to withstand a lifetime of abuse. All knob controls and handwheel are machined from aluminum then anodized or powder coated to provide a durable grip surface for all adjustments. Topping Perfection The Sinclair Competition Rest is completed with our Benchrest Top with new lockable forend stop assembly. Our Benchrest Top accepts both Edgewood and Protektor front bags in sporter, varmint, and benchrest configurations. The new lockable forend stop unit is adjustable for length (fore-aft), height, and cant. Our benchrest top is both NBRSA and IBS approved for competition shooting. The Sinclair Competition Rest is also available with our All-Purpose Top which features our updated Sinclair designed Edgewood Bag, easy adjust lockable bag ears and new forend stop. This top is an excellent choice for all Rimfire Benchrest competitions, particularly Sporter Rifle Class, as well as those wishing to attain the highest level of accuracy from all of their rifles. Accessories The Sinclair Competition Rest includes mounting holes for aftermarket accessories you may wish to entertain. Such as our Port Level Ammo Block which enables the shooter to adjust their tray of 20 rounds of PPC or BR wherever needed. Move it close to your rifle port for fast shooting. Brownells Christmas , Issue:5X, Page:017 Mini-Catalogs, Issue:15, Page:014 Sinclair, Issue:5B, Page:159

OWL EAR FRONT BAGS PROTEKTOR

sinclairintl shooting rests bipods

Quick View
$19.99
  (28)
    • Check Price
      • OWL EAR FRONT BAGS PROTEKTOR

      • These bags are designed for use on mechanical rests. These owl ear front bag comes in three different sizes. Choose the size that will most closely fit your particular forend width. Ear-to-ear dimensions 1-1/2" to 1-3/4" forend. Overall dimensions of the bag are 2-1/4" wide by 5-3/4" long and 1" high in the center. The bottom is leather for stability and there is no rib on top. Note: Sand is required to fill these bags. Mini-Catalogs, Issue:03, Page:004 Sinclair, Issue:5B, Page:167

BENCH MASTER REST BENCHMASTER

sinclairintl shooting rests bipods

Quick View
$69.99
  (97)
    • Check Price
      • BENCH MASTER REST BENCHMASTER

      • All-Steel Rest Cuts Felt RecoilHolds your rifle in position for shot-to-shot consistency. All steel construction, coarse and fine elevation adjustment, three-point leveling jacks, padded leather forearm bag and recoil pouch, plus a buttstock strap. Big Book Catalog, Issue:68, Page:394

AR-15/M16 PICATINNY RAIL BIPOD COMMAND ARMS ACC

sinclairintl shooting rests bipods

Quick View
$197.99
  (92)
    • Check Price
      • AR-15/M16 PICATINNY RAIL BIPOD COMMAND ARMS ACC

      • Compact, Streamlined, Fast-Deploying; Clamps Directly To Handguard RailCompact bipod clamps directly to handguard bottom rail and deploys instantly to provide a stable shooting platform wherever you need it. Legs conveniently fold forward, parallel to handguard, when not in use, and are independently adjustable to four positive-locking height settings (8" to 11"). Tough, non-slip rubber feet provide a stable purchase on the support surface. A 3" Picatinny rail on the underside allows installation of a vertical grip or other tactical accessory. Legs may be removed completely, leaving the locking hub and any attached accessory still on the handguard. No external springs to snag on other gear; tactile release button is easy to activate by feel, without taking your eyes off a potential target. AR-15, Issue:10, Page:101 Big Book Catalog, Issue:68, Page:396