Categories


Redding Seater Die, 375 Wthby Mag REDDING

sinclairintl reloading equipment

Quick View
$59.99
 
    • View
      • Redding Seater Die, 375 Wthby Mag REDDING

      • The Redding Standard Seating Die includes a build-in crimping ring and the proper seating plug. These seaters can be used with or without the crimping engaged. Sinclair, Issue:5B, Page:041

Redding Seater Die, 378 Wthby Mag REDDING

sinclairintl reloading equipment

Quick View
$59.99
 
    • View
      • Redding Seater Die, 378 Wthby Mag REDDING

      • The Redding Standard Seating Die includes a build-in crimping ring and the proper seating plug. These seaters can be used with or without the crimping engaged. Sinclair, Issue:5B, Page:041

Redding Seater Die, 460 Wthby Mag REDDING

sinclairintl reloading equipment

Quick View
$59.99
 
    • View
      • Redding Seater Die, 460 Wthby Mag REDDING

      • The Redding Standard Seating Die includes a build-in crimping ring and the proper seating plug. These seaters can be used with or without the crimping engaged. Sinclair, Issue:5B, Page:041

LOCK-N-LOAD PRESS CONVERSION & BUSHINGS HORNADY

sinclairintl reloading equipment

Quick View
$10.99 - $45.99
  (84)
    • Check Price
      • LOCK-N-LOAD PRESS CONVERSION & BUSHINGS HORNADY

      • Maximize your reloading time with the Lock-N-Load quick change bushing system. The Lock-N-Load reloading system is a patented quick change bushing system that lets you change dies with a simple flick of the wrist. With Lock-N-Load technology in your reloading press, you can stop loading, change dies and start loading another caliber in SECONDS. 1911, Issue:11, Page:067 Brownells Christmas , Issue:5X, Page:012 Big Book Catalog, Issue:68, Page:535 Sinclair, Issue:5B, Page:062

LOCK-N-LOAD NECK TURNING TOOL HORNADY

sinclairintl reloading equipment

Quick View
$113.90
  (68)
    • Check Price
      • LOCK-N-LOAD NECK TURNING TOOL HORNADY

      • The new Hornady® Neck Turn Tool saves hand loaders time and effort at the workbench. Designed for use on a wide variety of case lengths, the Hornady® Neck Turn Tool allows for the use of a cordless drill to make neck turning faster and easier, while providing superior consistency and surface finish. An adjustment knob enables the user to choose detents for .0005” adjustment increments, or no detents for infinite adjustment. Each neck turn tool will come with a 22 cal, 6mm, 6.5mm, and 30 cal mandrel. The Hornady® Neck Turn tool is a winning solution for precision hand loaders who want to maximize their case care productivity.

#2 MASTER SCALE REDDING

sinclairintl reloading equipment

Quick View
$9.99 - $91.99
  (53)
    • Check Price
      • #2 MASTER SCALE REDDING

      • The Redding No. 2 Master scale features a 505 grain capacity with a two couterpoise system. The hardened and ground knife edges ride in precision milled stainless steel bearing seats. The magnetic dampened beam provides fast accurate readings. Includes powder weighing pan with pour spout. Redding scales have a Lifetime Warranty. Big Book Catalog, Issue:68, Page:539 Sinclair, Issue:5B, Page:086

L.E. WILSON STAINLESS MICRO TRIMMER & PLATFORM KIT SINCLAIR/L.E. WILSON

sinclairintl reloading equipment

Quick View
$169.99
  (90)
    • Check Price
      • L.E. WILSON STAINLESS MICRO TRIMMER & PLATFORM KIT SINCLAIR/L.E. WILSON

      • Trimmer Platform The idea for this platform originated from a writer/customer of ours. The platform is a mounting board for the L.E. Wilson trimmer series that provides storage space for nine (9) case holders and a tapping block for knocking the cases out of the holder. The polyethylene platform has rubber feet, but most of us prefer it c-clamped to the bench. L.E. Wilson Stainless Micrometer Trimmer with Stand The L.E. Wilson Stainless Micro Trimmer utilizes the most accurate trimmer in the world in its stainless steel configuration, an exclusive Sinclair International product. The compact micrometer unit is incorporated into the stop bearing which allows the user to easily make quick trim adjustments in .001" increments. The L.E. Wilson Stainless Micro trimmer uses a case holder that holds the case by the body taper and utilizes no pilots during the case trimming operation. Trimmer case holder, cutter housing, and adjustment stop sit in perfect alignment with each other. This guarantees an identical trim length for each case. When trimming cases shorter than 1.3” such as pistol cases, the use of a spacer (part number WX11) is necessary. The L.E. Wilson Stainless Micro Trimmer sets on top of our Sinclair Mounting Stand with Shark Fin Clamp. The Shark Fin enables the user to quickly trim and exchange cases in the case holder. All of our L.E. Wilson trimmer accessories work with the New L.E. Wilson Stainless Micro Trimmer. Visit our website, catalog, or call our reloading technicians to order trimmer case holders and other accessories. * Trimmer Case Holders and accessories sold separately. Big Book Catalog, Issue:68, Page:530 Sinclair, Issue:5B, Page:010

John Whidden's Bullet Pointing Die System WHIDDEN GUNWORKS

sinclairintl reloading equipment

Quick View
$219.99
  (46)
    • Check Price
      • John Whidden's Bullet Pointing Die System WHIDDEN GUNWORKS

      • John Whidden has won two Long Range Championship's at Camp Perry using bullets pointed in this die system. The Whidden Pointing Die System is designed to profile the tips of jacketed bullets to reduce drag and improve BC. Testing has shown that shooters will see pointed bullets shoot three fourths to 1 MOA flatter at 1000 yards, with wind drift improvement of about 5 percent. The Whidden system works like a regular reloading die in a standard press (including the Forster Co-Ax) and uses caliber specific sleeves to change bullet calibers. Pointing bullets can be done just as fast as sizing brass. Extensive testing has also shown that light meplat trimmer after pointing produces the maximum possible BC consistency. Order the tool and a bullet pointing sleeve for the caliber you choose to point. Order additional sleeves to change calibers. Full instructions are included. Ships with the #0 insert. Sinclair, Issue:5B, Page:006

SINCLAIR CASE NECK SORTING TOOL SINCLAIR INTERNATIONAL

sinclairintl reloading equipment

Quick View
$9.99 - $89.99
  (71)
    • Check Price
      • SINCLAIR CASE NECK SORTING TOOL SINCLAIR INTERNATIONAL

      • The Sinclair Case Neck Sorting Tool is designed for the reloader to quickly sort brass by neck wall thickness. Large variances in neck wall thickness can affect the consistency of how the case seals the chamber and is also an indication of variances in body wall thickness. Cases are rotated under an indicator tip while they are supported on a case neck pilot and a support pin through the flash hole. The low profile and stable platform makes for comfortable use and accurate results. The tool works for 22 thru 45 caliber cases and can be used on 17 and 20 caliber cases with the optional carbide alignment rod. Tool can be ordered with or without a dial indicator. Order 17 Caliber and 25 Caliber Sinclair Case Neck Pilots separately. MIC-4 pin fits .060 & .080 flash holes. Sinclair, Issue:5B, Page:031

BENCH REST® SEATER DIES FORSTER

sinclairintl reloading equipment

Quick View
$51.99
  (61)
    • Check Price
      • BENCH REST® SEATER DIES FORSTER

      • Forster Bench Rest Reloading Dies are of excellent quality and provide the reloader with the ability to produce concentric rounds time and time again. Each die is manufactured from the finest quality steel carefully machined to very tight tolerances. Dies are hand polished both before and after the heat-treating process to guarantee an extra fine finish. All Forster reloading dies feature their Forster Cross Bolt Die Locking Ring that tightens the two ends of the split ring instead of tightening a screw directly into the threads of the die. Forster Bench Rest Seater Dies were the first of their kind to utilize a close fitting chamber that holds the case, the bullet and the seating stem all in perfect alignment. This support system allows the reloader to produce exceptionally straight ammunition. Conventional seating dies with a fixed chamber and seating system may start your bullet into the case neck at an angle. They lack the support the Forster Bench Rest Seater provides. Big Book Catalog, Issue:68, Page:533 Sinclair, Issue:5B, Page:047

WILSON STAINLESS MICROMETER TRIMMER WITH STAND SINCLAIR/L.E. WILSON

sinclairintl reloading equipment

Quick View
$159.99
  (18)
    • Check Price
      • WILSON STAINLESS MICROMETER TRIMMER WITH STAND SINCLAIR/L.E. WILSON

      • The Wilson Stainless Micro Trimmer utilizes the most accurate trimmer in the world in its new stainless steel configuration, an exclusive Sinclair International product. The compact micrometer unit is incorporated into the stop bearing which allows the user to easily make quick trim adjustments in .001" increments. The Wilson Stainless Micro trimmer uses a case holder that holds the case by the body taper and utilizes no pilots during the case trimming operation. Trimmer case holder, cutter housing, and adjustment stop sit in perfect alignment with each other. This guarantees an identical trim length for each case. When trimming cases shorter than 1.3” such as pistol cases, the use of a spacer (part number WX11) is necessary.The Wilson Stainless Micro Trimmer sets on top of our Sinclair Mounting Stand with Shark Fin Clamp. The Shark Fin enables the user to quickly trim and exchange cases in the case holder. All of our Wilson trimmer accessories work with the New Wilson Stainless Micro Trimmer. Visit our website, catalog, or call our reloading technicians to order trimmer case holders and other accessories. * Trimmer Case Holders and accessories sold separately. Big Book Catalog, Issue:68, Page:530 Sinclair, Issue:5B, Page:010

MARVELUX® BULLET CASTING FLUX BROWNELLS

sinclairintl reloading equipment

Quick View
$9.99 - $46.99
  (65)
    • Check Price
      • MARVELUX® BULLET CASTING FLUX BROWNELLS

      • Non-Smoking Non-Fuming Odorless Flux Far and away the most popular - and successful - bullet casting flux, MARVELUX has been on the market since 1971 filling the needs of knowledgeable and successful professional and hobbyist bullet casters. MARVELUX is non-corrosive to iron and steel, and does not produce fumes which can cause corrosion, as does sal-ammoniac (ammonium chloride). In fact, regular use will keep your pot free from rust! Reduces dross formation dramatically while increasing fluidity of bullet alloys, making it easier to obtain well filled-out bullets. MARVELUX is well suited to any lead alloy melt intended for casting bullets or swaging cores. Non-smoking, flameless and non-smelling. Superior to beeswax, tallow, paraffin, and other grease-type fluxes. Even better than rosin and it doesn't smell like you're burning down an old shed. Big Book Catalog, Issue:68, Page:419 Cowboy Action, Issue:03, Page:038

CAM-LOCK CASE TRIMMER HORNADY

sinclairintl reloading equipment

Quick View
$5.49 - $81.99
  (19)
    • Check Price
      • CAM-LOCK CASE TRIMMER HORNADY

      • The Hornady Cam-Lock Case Trimmer produces accurate trim lengths on every case. Trim length is micro-adjustable with the fine adjust knob on the cutter shaft. A light touch on the cam-lock securely locks the case into the Hornady shellholder. Cases are held square to the large cutter head that can handle cases up to 50 caliber. Hornady has made the frame height taller than previous models, which along with the more ergonomic trimmer handle makes it comfortable, fast, and easy to use. The cast trimmer includes the seven most popular pilots; .22, 6mm, .270, 7mm, .30, .38, and .45 calibers. Additional pilots are available for .20 caliber through .50 caliber. An optional .17 caliber pilot/cutter is available. Optional accessories include a chamfering tool and a deburring tool that thread on in place of the cutter for consistent and square chamfering/deburring. A power adapter is also available. Order shellholders separately. 1911, Issue:11, Page:066 Sinclair, Issue:5B, Page:012

BULLET PULLER W/O COLLET RCBS

sinclairintl reloading equipment

Quick View
$21.99
  (77)
    • Check Price
      • BULLET PULLER W/O COLLET RCBS

      • This collet type bullet puller from RCBS will pull jacketed bullets from .17 caliber through50 caliber with the appropriate collet (order collets separately from chart) installed in the puller body. Puller can be used in any 7/8-14single stage reloading press. RCBS states that the collets do not damage jacketed bullets. Not for rimfire ammunition. Requires separate purchase of caliber specific collets. Sinclair, Issue:5B, Page:021

CARBIDE GRX PUSH THRU BASE SIZING DIE REDDING

sinclairintl reloading equipment

Quick View
$83.99
  (58)
    • Check Price
      • CARBIDE GRX PUSH THRU BASE SIZING DIE REDDING

      • This Push Thru die is designed to completely eliminate bulges near the case base, common in 40 S&W brass. By passing the case completely through the dies, the bulge is removed and the brass may be returned to service. The GRX die is currently only available for 40 S&W. 1911, Issue:11, Page:066 Big Book Catalog, Issue:68, Page:534 Sinclair, Issue:5B, Page:044

CASE TRIMMER W/ MICROMETER REDDING

sinclairintl reloading equipment

Quick View
$169.99
  (21)
    • Check Price
      • CASE TRIMMER W/ MICROMETER REDDING

      • This case trimmer has all the same great features as the standard Redding Trimmer with the addition of a case length micrometer and push button chuck lock. The 2400 trimmer also utilizes a new extended cast iron frame which enables it to handle the lastest long action cartridges and longer old time classic as well. Trims cases up to three and one fourth in length. The micrometer is easy to read and makes quick and precise case length adjustments in increments of .001 inch. Redding's push button chuck lock simplifies case loading and unloading and faciliates perfect alignment of the case between the collet and pilot. Includes six case pilots - .22 cal, 6mm, .25 cal, .270 cal, 7mm, and and .30 caliber, two neck cleaning brushes .22 thru .30 cal and Large and small primer pocket cleaners. Big Book Catalog, Issue:68, Page:529 Sinclair, Issue:5B, Page:013

COMPETITION FULL-LENGTH DIE SETS RCBS

sinclairintl reloading equipment

Quick View
$112.99
  (62)
    • Check Price
      • COMPETITION FULL-LENGTH DIE SETS RCBS

      • The RCBS Competition Dies are for the competitive marksman that measures success in fractions of an inch.The Competition Full Length Die features a raised expander ball allowing extra leverage for smooth, effortless neck expansion. This enables maximum concentricity between the neck and body of your case. Dies have a durable black oxide finish. Not for use with progressive reloading presses. Big Book Catalog, Issue:68, Page:533 Sinclair, Issue:5B, Page:054

BUSHING BUMP NECK SIZING DIES FORSTER

sinclairintl reloading equipment

Quick View
$59.99
  (88)
    • Check Price
      • BUSHING BUMP NECK SIZING DIES FORSTER

      • These had-polished bushing style dies are a little different than traditional neck style bushing dies or full-length style bushing dies. Forster's Precision Bushing Bump Dies size the case neck and adjust the headspace length without sizing the body of the case. Includes a decapping assembly without an expander ball so your bushing selection determines the internal neck diameter. This die is only compatible with Forster bushings - does not work with Redding or Wilson bushings. When selecting a bushing size, choose a bushing approximately .002 inch smaller than a loaded round measures at the case neck. Bushings are available in increments of .001 inch. Bushings must be purchased separately. Sinclair, Issue:5B, Page:046

BIG BOSS PRO-PAK DELUXE RELOADING KIT REDDING

sinclairintl reloading equipment

Quick View
$569.99
  (31)
    • Check Price
      • BIG BOSS PRO-PAK DELUXE RELOADING KIT REDDING

      • This kit includes the following items: - Big Boss Reloading Press (one of the favorites among many reloaders at Sinclair) - Model 2 Powder and Bullet Scale (one of the most accurate balance beam scales in reloading) - Powder Trickler - One of the most heavy duty ones available - Pad Style Case Lube Kit (includes lube and pad) -Case mouth deburring tool (chamfers and deburs) - Powder funnel - Hodgdon Annual Reloading Magazine - Model #3BR Powder Measure (throws 5 to 100 grains) - Model 1400XT Case trimming lathe - includes universal collet that fits most popular cases and six of the most common caliber pilots (.22, 6mm, .270, 7mm, and .30 caliber) Sinclair, Issue:5B, Page:064

CAM-LOCK PULLER HORNADY

sinclairintl reloading equipment

Quick View
$19.99 - $27.99
  (36)
    • Check Price
      • CAM-LOCK PULLER HORNADY

      • The Hornady Cam-Lock Bullet Puller is the nicest collet style puller we have used.The cam feature locks the collet around the bullet and uses your press leverage to pull the bullet. We are really impressed with the quality of this tool and smoothness of operation. Big Book Catalog, Issue:68, Page:530 Sinclair, Issue:5B, Page:021

PRIMER POCKET SWAGER- BENCH TOOL RCBS

sinclairintl reloading equipment

Quick View
$89.99
  (85)
    • Check Price
      • PRIMER POCKET SWAGER- BENCH TOOL RCBS

      • The bench-mounted RCBS Primer Pocket Swager Tool easily removes military-style primer pocket crimps or staking from cartridge cases. Featuring a rugged cast-aluminum body and foam-padded handle, the tool supports cartridge cases from the inside with a hardened steel rod, perfectly aligning the primer pocket with the swager head. Comes with two steel support rods to fit small and large primer pockets. Slide the case onto the steel rod, rotate the case down into position in the swager, and operate the handle to complete the job. Brownells Christmas , Issue:3X, Page:005 Big Book Catalog, Issue:68, Page:530 Mini-Catalogs, Issue:15, Page:017 Sinclair, Issue:5B, Page:024

GEN5 DIGITAL POWDER SYSTEM LYMAN

sinclairintl reloading equipment

Quick View
$279.99
  (53)
    • Check Price
      • GEN5 DIGITAL POWDER SYSTEM LYMAN

      • Accurate to one tenth grain, the GEN5 dispenses all types of smokeless powder at two grains per second. In addition, it features an auto repeat function that drops a precise charge each time the pan is reset. Based on digital technology that overcomes problems commonly experienced by older designs, the system is packed with additional state of the art improvements like fast, 3 minute warmup, new anti-static and anti-drift technology and has sophisticated electronic shielding to resist interference from other electronic devices like cell phones, etc. The top of the line GEN5 adds the benefit of an extra-large, easy-to-read LCD screen and touch screen controls. Plus, the quick drain powder reservoir speeds powder changes and the onboard memory stores up to 100 loads. Touch-Screen Controls Stores up to 100 Loads in Memory Extra Large, Easy-to-read LCD Display Fast, 3 Minute Warm-up Auto Repeat Function Automatically Dispenses Charges by Resetting Pan Quick-Drain to Change Powders Electronic Interference Shield Resists Interference from Cell Phones, etc Anti-Static/Anti-Drift Technology Fast Operation - Dispenses 2 Grains per Second Accurate to 1/10 grain Handles all types of Smokeless Powders Not for use with black powder. Sinclair, Issue:5B, Page:088

SWAGE GAGE™ PRIMER POCKET GAUGE BALLISTIC TOOLS

sinclairintl reloading equipment

Quick View
$11.99
  (60)
    • Check Price
      • SWAGE GAGE™ PRIMER POCKET GAUGE BALLISTIC TOOLS

      • Stop guessing about your primer pockets. Know for sure with the Swage Gage Primer Pocket Gauge. Available for Small or Large primers. Check primer pocket depth and diameter. Use the "Go" end of the gauge to check primer pocket depth, if any crimp is properly removed, and if the primer pocket is loose. If it feels loose on the "Go" end of the gauge, use the other end of the tool, the "No Go" end, to test if the primer pocket is too loose to hold a primer. If the No-Go gauge slides into the pocket, then you know to junk that brass. Sinclair, Issue:5B, Page:004

LOCK-N-LOAD™ HEADSPACE GAUGE TOOL HORNADY

sinclairintl reloading equipment

Quick View
$29.99 - $37.99
  (8)
    • Check Price
      • LOCK-N-LOAD™ HEADSPACE GAUGE TOOL HORNADY

      • This affordable headspace gauge set from Hornady Lock-N-Load Products (formerly Stoney Point) allows the handloader to measure changes to the headspace of cartridges with a dial/digital caliper. Different bushing sizes (depending on cartridge family) insert into the Hornady Lock-N-Load Comparator Body, which attaches to a caliper. This handloader can then measure the changes between fired and sized brass. this enables the handloader to adjust his sizing dies for a proper fit in his chamber. When a handloader oversizes his cases it can cause excessive headspace problems, one of which is to shorten the life of the brass. The Hornady Lock-N-Load Headspace Gauge Set will allow the user to measure brass from the case head to the datum line on the case shoulder. Five bushing sizes allow you to measure the headspace on most bottleneck cartridges from 17 Remington through the belted magnums. The bushings are sold either with the Comparator Body or without the Comparator Body (for those who already have one). View Hornady Gauge Bushing Chart. Big Book Catalog, Issue:68, Page:533 Sinclair, Issue:5B, Page:028 Sinclair, Issue:5B, Page:035

2500 PRO MAGNUM CASE TUMBLER LYMAN

sinclairintl reloading equipment

Quick View
$84.99 - $99.99
  (9)
    • Check Price
      • 2500 PRO MAGNUM CASE TUMBLER LYMAN

      • The Lyman Pro Magnum tumbler is perfect for high-volume reloaders. Features a 1.75 gallon bowl and will handle approximately 315 rifle case (30-06) at a time. The bowl is specially designed for a powerful cleaning action even when loaded to capacity. The proven, heavy duty motor insures long-life and aggressive cleaning. The Lyman 2500 Pro Magnum Case Tumbler is available in 110 Volt for domestic use and a 230 Volt design for international customers. Big Book Catalog, Issue:68, Page:539 Sinclair, Issue:5B, Page:073

LNL COMPARATOR SET - 22 6MM 25 270 7MM 30 CAL HORNADY

sinclairintl reloading equipment

Quick View
$29.99
  (26)
    • Check Price
      • LNL COMPARATOR SET - 22 6MM 25 270 7MM 30 CAL HORNADY

      • The Stoney Point Chamber-All Bullet Comparator body attaches to the blade of your caliper with a small thumbscrew and utilizes inserts for each caliber. The design of this tool allows proper alignment when used with the stoney Point Chamber-All OAL gauge (offset position), or it can be used in a conventional centerline method. Inserts are sold separately, or the tool can be purchaed with six inserts as a kit. The body can also be used with to hold the Stoney Point headspace gage inserts. Big Book Catalog, Issue:68, Page:532 Sinclair, Issue:5B, Page:028

NECK SIZING DIE SETS REDDING

sinclairintl reloading equipment

Quick View
$46.99 - $89.99
  (42)
    • Check Price
      • NECK SIZING DIE SETS REDDING

      • Redding Neck Die Sets contain two dies. The Neck Sizing Dies contains a decapping rod assembly with a neck expancer button. The Seating Die includes bullet guide, built in crimp ring and the proper seating plug. Big Book Catalog, Issue:68, Page:534 Sinclair, Issue:5B, Page:040 Sinclair, Issue:5B, Page:041