Categories


RIFLE 2 DIE SETS LEE

sinclairintl reloading equipment

Quick View
$31.99 - $35.99
 
    • View
      • RIFLE 2 DIE SETS LEE

      • Limited Production 2-Die Set includes a Full Length Sizing Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data Dies are typically produced in small runs throughout the year. Inventory is subject to availability Made of Steel

CASE TRIMMER FORSTER

sinclairintl reloading equipment

Quick View
$69.99
 
    • View
      • CASE TRIMMER FORSTER

      • The Forster Case Trimmer is one of the most versatile reloading tools available on the market today. It utilizes an extremely accurate Brown and Sharpe type collet to hold the case. Pilots are used to support the case neck during case trimming. A collet and pilot are needed to operate this trimmer and are sold separately. Trimmer can be used for case length trimming, hollow pointing, neck turning, inside neck reaming, case mouth deburring, and primer pocket reaming (removes military crimps). The trimmer can be powered by a drill or power screwdriver by adding the Forster Power Adapter (#FPA1000). Requires Forster Trimmer Cutter w/Shaft 17 cal for use with .17 cal Pilot.

        Brownells Christmas , Issue:3X, Page:014 Big Book Catalog, Issue:68, Page:529 Sinclair, Issue:5B, Page:014 Sinclair, Issue:5B, Page:048

SINCLAIR POWDER BOTTLES AND ADAPTERS SINCLAIR INTERNATIONAL

sinclairintl reloading equipment

Quick View
$0.99 - $19.99
 
    • View
      • SINCLAIR POWDER BOTTLES AND ADAPTERS SINCLAIR INTERNATIONAL

      • Sinclair bottle adapters to replace the factory reservoirs on Redding, Lyman, and RCBS Uniflow measures. These adapters allow you to use our 16 oz. powder bottles as well as some of the Hodgdon and Accurate Arms 1 lb. powder bottles. Flip your measure upside down, thread it on to your storage bottle, and turn it right side up. Our bottles with a removable bottom plug allow you to continually add powder to the bottle as you empty it. NOTE: Redding measures use the factory reservoir screws to secure the adapter in place. RCBS and Lyman measures require you to drill and tap a small hole in the measure casting to secure the adapter. Our 16 oz. bottles are excellent for storing various lot numbers of powder in or when you are working out of a larger 8 lb. keg. Many shooters prefer the square bottles because they pack easily into a range box. Both round and square 16 oz. bottles are available with and without bottom plug.

        Sinclair, Issue:5B, Page:084

AMMUNITION MEASUREMENT SYSTEM FORSTER

sinclairintl reloading equipment

Quick View
$16.99 - $113.99
  (1)
    • Check Price
      • AMMUNITION MEASUREMENT SYSTEM FORSTER

      • The Forster Ammunition Measurement System makes it possible for the handloader to use ordinary dial calipers to make normally difficult length measurements based on the bullet ogive or the case shoulder. By measuring cases to the datum line on the shoulder, the reloader can custom-fit the ammunition to a rifle’s chamber for the best possible fit for better accuracy potential and longer case life. Using the bullet dial makes it easy to accurately determine bullet seating depth measured from the ogive when changing the seater die setting or when checking loaded rounds for consistency. It can also be used to check the bullets alone for variations that could hurt accuracy. The Complete Kit includes the Body with Case Dial for checking cases and two Bullet/Cartridge Dials. The #1 dial fits 224, 243, 264, 284, and 308 calibers. The #2 dial fits 172, 204, 257, 277, and 338. Also included in the set are complete instructions, storage box, and a laminated chart with common datum diameters. The #3 dial is available separately and left blank with five starter holes so it can be drilled to any size needed. The Datum Dial body and bullet/cartridge dials can also be purchased separately. Big Book Catalog, Issue:68, Page:532 Sinclair, Issue:5B, Page:027

PRO 2000 PROGRESSIVE PRESS WITH AUTO-INDEXING RCBS

sinclairintl reloading equipment

Quick View
$7.99 - $569.99
  (18)
    • Check Price
      • PRO 2000 PROGRESSIVE PRESS WITH AUTO-INDEXING RCBS

      • This five station automatic indexing progressive press is one of the easiest to use on the market. Simply insert a case and bullet, cycle the handle and a complete round drops out. No need to rotate the shell plate keeping your hands free for inserting the next case and bullet. The five station design allows for the use of a Powder Checker or Lock-Out die or you can seat bullets and crimp cases in separate operations. The RCBS APS priming system automatically loads primers for you and includes APS priming strips along with the Strip Loading Tool so you won’t have to touch your primers. The quick change removable die plate means quick cartridge changeover and more time for reloading. The die plates accept any standard 7⁄8"-14 threaded dies. The Pro 2000 includes a Uniflow Powder Measure with the Case-Activated linkage system which means powder charges will be dispensed accurately and only if a cartridge case is present!The rugged cast iron frame has a large working window allowing easy insertion and removal of cases. Includes bullet tray, loaded ammo bin, and empty case bin. All you need are dies and the correct size shell plate to get started.Optional Accessories for RCBS Pro 2000 Shell Plates: Use RCBS standard shellholder to order correct shell plate.Additional Die Plates: Leave your dies in the die plate and just change entire die plate for a quick cartridge changeover.Powder Checker: A simple, effective way to visually check powder charges when using a progressive press. The Powder Checker sits between the powder charging and bullet seating station. The probe rod lets you visually confirm that the case is properly charged before bullet seating. For use with rifle and pistol cases.Lock-Out-Die: This die detects a “no powder” or a “double charge” condition in the progressive reloading process. It locks up the press alerting the reloader to the problem so the cause can be corrected. Only for use with straight-wall pistol cartridges, 9mm and larger.Pow’r Punch Decap Rod – for use with pistol calibers in progressive presses and works in all RCBS pistol sizing dies. The decap rod has a spring-loaded decapping pin to insure the spent primer is fully ejected from the primer pocket. Eliminates indexing problems caused by spent primers jamming the shell plate. Will work in any 7⁄8”-14 progressive press when installed in RCBS sizing dies.Note: Plate size corresponds to standard RCBS shellholders. See shellholders to find the RCBS shellholder number for your cartridge to cross reference with this shell plate chart. Ask one of our sales reps if you need help. Big Book Catalog, Issue:68, Page:536 Sinclair, Issue:5B, Page:061

4 HOLE TURRET PRESS WITH AUTO INDEX, DELUXE KIT LEE

sinclairintl reloading equipment

Quick View
$219.99
  (20)
    • Check Price
      • 4 HOLE TURRET PRESS WITH AUTO INDEX, DELUXE KIT LEE

      • The Lee Classic turret press is fast and convenient when loading handgun cartridges, with rates in excess of 250 rounds per hour possible. The kit includes the Pro Auto-Disk powder measure and riser, perfect for all handgun and small rifle cartridges. Large and Small Safety Prime are included making on press priming an ease. Instant change turret makes changing calibers a snap. Deactivate the auto-index and batch load the longest and largest rifle cartridges. Complementing your press kit are the case conditioning tools to prepare your brass for loading. Includes Cutter, Lock Stud, Chamfer Tool, small and large Primer Pocket Cleaner, and a tube of Lee case sizing lube. Complete it with the cartridge specific Case Length Gauge. Verify your loads with the included Lee Safety powder scale. Completing the kit is Modern Reloading Second Edition recently revised with all load data covering 167 cartridges with over 28,000 loads. Sinclair, Issue:5B, Page:066

TURBO CASE CLEANING MEDIA LYMAN

sinclairintl reloading equipment

Quick View
$10.99 - $29.99
  (2)
    • Check Price
      • TURBO CASE CLEANING MEDIA LYMAN

      • Lyman Case Cleaning Media is the most effective choice for cleaning dirty and tarnished cases. A few hours in a Lyman Turbo Tumbler and cases are clean, polished, and ready for reloading. Available in Specially Treated Corncob or Rouge Bearing Nutshell. 1911, Issue:11, Page:069 Sinclair, Issue:5B, Page:075

BULLET PULLER COLLET HORNADY

sinclairintl reloading equipment

Quick View
$11.49
  (69)
    • Check Price
      • BULLET PULLER COLLET HORNADY

      • The Hornady Cam-Lock Bullet Puller is the nicest collet style puller we have used. The cam feature locks the collet around the bullet and uses your press leverage to pull the bullet. We are really impressed with the quality of this tool and smoothness of operation. Big Book Catalog, Issue:68, Page:530 Sinclair, Issue:5B, Page:021

6 CAVITY HANDGUN MOULDS LEE

sinclairintl reloading equipment

Quick View
$41.99
  (64)
    • Check Price
      • 6 CAVITY HANDGUN MOULDS LEE

      • The Lee 6 Cavity Handgun moulds are made for heavy duty volume production. Moulds and blocks have steel bushings and alignment pins for lasting pecision. Price includes a cam operated sprue plate to eliminate the pounding common to ordinary moulds. The sprue plate is hard anodized and held down with wave washers at each end. All Lee mould blocks are made from aluminum because of its exceptional moulding qualities. All mould cavities are CNC machined for unmatched roundness and size control. Does not include handles.

DIGITAL CALIPER LYMAN

sinclairintl reloading equipment

Quick View
$39.99
  (74)
    • Check Price
      • DIGITAL CALIPER LYMAN

      • Direct, Digital Readout In Both Inches And MillimetersDeluxe features in a moderately priced, precision caliper. Easy-to-see, LCD digital readout takes the guesswork out of measuring. Gives inside, outside and depth functions. Manual on/off switch. Push button zero allows pre-selection of a zero dimension and plus or minus comparison for sorting of parts based on variation. Single toggle button and dual beam graduations give instant inch and millimeter conver-sions. Reads to 6"/150mm with .0005"/.01mm resolution and .001"/0.1mm accuracy. 1911, Issue:11, Page:064 Big Book Catalog, Issue:68, Page:479 Mini-Catalogs, Issue:05, Page:005 Sinclair, Issue:5B, Page:032

TYPE S-NECK BUSHING DIES, CATEGORY I CARTRIDGES REDDING

sinclairintl reloading equipment

Quick View
$59.99 - $74.99
  (73)
    • Check Price
      • TYPE S-NECK BUSHING DIES, CATEGORY I CARTRIDGES REDDING

      • Bushing Neck Sizing Die utilizes interchangeable bushings for precise case neck resizing, allowing the reloader to control the amount of neck sizing on his cases. A reloader can eliminate oversizing his brass by selecting a bushing correctly sized for his cases and chamber. Available in over 70 calibers with interchangeable bushings in .001inch increments. The decapping rod comes with a standard expander ball or a decapping pin retainer for sizing without the expander ball installed. Adjustable decapping rod allows positioning of the bushing to resize only the portion of the neck desired. Dies supplied without bushings. Sold separately or as part of a set. Sinclair, Issue:5B, Page:038

SINCLAIR NECK TURNING MANDREL SINCLAIR INTERNATIONAL

sinclairintl reloading equipment

Quick View
$9.99
  (84)
    • Check Price
      • SINCLAIR NECK TURNING MANDREL SINCLAIR INTERNATIONAL

      • Sinclair stainless steel neck turning and expander mandrels for 17 through 50 caliber cartridges are turned from high grade stainless steel on precision turning centers. Turning mandrels are sized .002 inch under bullet diameter and expander mandrels are .001 inch under bullet diameter. The shape and surface of all mandrels is the result of years of experimenting by many expert handloaders. Our Carbide turning mandrels are precision ground from solid carbdie stock, which yields even closer tolerances. All carbide mandrels are ground to.002 inch under bullet diameter. Adjustments on our NT-4000 turning tool will be more consistent with carbide mandrels due to the tighter tolerances of the mandrels. large caliber (35 to 50 caliber) mandrels fit only the Large Caliber Expander Expander Body and NT-5000 Turning Tool. Sinclair, Issue:5B, Page:019

DECAPPING DIE LEE

sinclairintl reloading equipment

Quick View
$3.99 - $13.99
  (10)
    • Check Price
      • DECAPPING DIE LEE

      • The Lee Universal Decapping die is made of steel and designed to allow shooters to decap cases without the need of lube or cleaning. Guaranteed by Lee as unbreakable. Easily removes crimped-in primers. Fits cases up to .550”, not recommended for use on .17-.20 calibers. 1911, Issue:11, Page:069 Big Book Catalog, Issue:68, Page:533 Sinclair, Issue:5B, Page:069

CARBIDE 3-DIE HANDGUN SETS REDDING

sinclairintl reloading equipment

Quick View
$91.99 - $106.99
  (7)
    • Check Price
      • CARBIDE 3-DIE HANDGUN SETS REDDING

      • Titanium carbide differs considerably from other carbides, and is the ideal material for resizing cartridge cases. Titanium carbide has the highest hardness of any readily available carbide. The difference is in the microstructure. Viewed under a microscope it appears smooth and rounded, which presents a slippery non-galling surface, ideal for lubeless resizing of cartridges. The Carbide 3-Die set includes the Titanium Carbide sizing die, expander die and bullet seating die with built-in crimp. 1911, Issue:11, Page:066 Big Book Catalog, Issue:68, Page:535 Sinclair, Issue:5B, Page:042

3-IN-1 CASE MOUTH CUTTER FORSTER

sinclairintl reloading equipment

Quick View
$59.99
  (53)
    • Check Price
      • 3-IN-1 CASE MOUTH CUTTER FORSTER

      • The 3-In-1 Case Mouth Cutter from Forster creates a perfectly aligned, consistent chamfer on the inside and outside of the case mouth to help ensure benchrest quality handloads. Installs easily over the existing cutter shaft on all Foster Original and Power Case trimmers. Chamfers the inside to a 14° angle that works for both VLD boat tail and standard bullets. Outside is chamfered to a 30° angle, plus is fully adjustable for chamfer length. Long lasting carbide blades hold edge indefinitely with proper care. Sinclair, Issue:5B, Page:014

7-HOLE CHAMBER CHECKERS EGW

sinclairintl reloading equipment

Quick View
$19.99 - $39.99
  (72)
    • Check Price
      • 7-HOLE CHAMBER CHECKERS EGW

      • Chamber Checkers help you avoid jams, misfires, feeding problems, and other malfunctions caused by out-of-spec ammo. Use with factory loaded ammunition as well as reloaded ammo prior to shooting to verify  your ammunition is within SPEC. These 7-Hole checkers are machined from solid 6061 T6 aircraft grade aluminum and uses actual Clymer reamers to ensure the ammo matches your chamber. Measures minimum case diameter as well as maximum overall length. Anodized Matte Black. 1911, Issue:10, Page:054 Big Book Catalog, Issue:68, Page:403 Big Book Catalog, Issue:68, Page:468

GAS CHECKS HORNADY

sinclairintl reloading equipment

Quick View
$27.99 - $44.99
  (11)
    • Check Price
      • GAS CHECKS HORNADY

      • If you cast your own bullets, Hornady's crimp-on gas checks will enhance their performance. During sizing, the gas check crimps to the base of cast lead bullets to seal gasses and protect the base from deformation. Hornady gas checks are the only real choice for bullet casters. Packaged 1000 per box. Sinclair, Issue:5B, Page:109

ONE SHOT SONIC CLEAN SOLUTIONS HORNADY

sinclairintl reloading equipment

Quick View
$19.99 - $59.99
  (29)
    • Check Price
      • ONE SHOT SONIC CLEAN SOLUTIONS HORNADY

      • By combining an innovative, unique cleaning solution with intense ultrasonic cleaning action Hornady takes cartridge case and small parts cleaning to the next level. Safe for all metal surfaces, won’t harm bluing, parkerizing, anodizing, or most paints. Designed specifically for the Hornady Lock-N-Load Sonic Cleaners. The reloaders best friend Sonic Clean Cartridge Case cleaning solution is specially formulated to quickly remove powder residue, carbon buildup, tarnish and oxidation on brass cartridge cases. Cleans the entire case, inside and out including the primer pockets without the hassle of having to clean out any leftover media. Sonic Clean Gun Parts Formula gets deep into nooks and crannies and cuts through the toughest dirt, grit and grime for deep-down, cleaning. Works great on small parts, springs, screws, bolts, triggers even handgun slides and revolver cylinders. 1911, Issue:11, Page:069 Big Book Catalog, Issue:68, Page:540 Sinclair, Issue:5B, Page:076 Sinclair, Issue:5B, Page:077

NECK SIZER DIES RCBS

sinclairintl reloading equipment

Quick View
$32.99 - $56.99
  (65)
    • Check Price
      • NECK SIZER DIES RCBS

      • Neck sizing dies size only the case neck of the cartridge - not the shoulder or the case body. Use neck dies when cases are fired in the same rifle and a close cartridge case to chamber fit is desired. The neck die will size the neck, decap the spent primer, then size for correct bullet tension with the expander ball. Neck dies come in an RCBS plastic die box and will fit all 7/8 to 14 reloading presses. Sinclair, Issue:5B, Page:055

VLD BULLET SEATING MICROMETERS REDDING

sinclairintl reloading equipment

Quick View
$37.99
  (15)
    • Check Price
      • VLD BULLET SEATING MICROMETERS REDDING

      • Redding Competition Seating Dies deliver the precision and accuracy preferred by the most discriminating handloaders. Now you can easily covert your conventional seating die to a precision micrometer seating die for use with VLD bullets for precise, repeatable bullet seating depths to within 1/1000th of an inch and potential world-record accuracy. Designed for all seating dies that use a seat plug with ½-20 threads. Easily changes from one die to another, just match the number on your current seating plug to the corresponding bullet seating micrometer number. View Redding Micrometer Reference Chart here. Sinclair, Issue:5B, Page:043

RIFLE CASE LENGTH/HEADSPACE GAUGES LYMAN

sinclairintl reloading equipment

Quick View
$21.99
  (49)
    • Check Price
      • RIFLE CASE LENGTH/HEADSPACE GAUGES LYMAN

      • To achieve the highest degree of safety and accuracy, Lyman recommends that all bottleneck rifle cases be inspected after resizing to ensure that the proper headspace dimension is maintained. The best way to check this critical dimension is with a Lyman case length/headspace gauge. he reloader simply inserts the case into the gauge to insure that it does not exceed the maximum or fall below the minimum allowable headspace. Caution: Any case found with excessive headspace should be destroyed immediately.

LOCK-N-LOAD® AUTO CHARGE™ HORNADY

sinclairintl reloading equipment

Quick View
$239.99
  (67)
    • Check Price
      • LOCK-N-LOAD® AUTO CHARGE™ HORNADY

      • Digital Powder Dispenser Quickly Meters Precise, Consistent ChargesElectronic powder measure has a scale capacity of 1,000 grains and can precisely dispense powder to within 0.1 grain. Easy-to-use keypad, back-lit digital display, and three speed settings help you quickly meter and measure the powder charge you need. Lets you choose between automatic and manual dispense settings, and overcharge prevention system helps protect you from reloading mistakes. Easy-Clean drain for quick, complete removal of powder from the hopper for cleaning or to switch powders. Do not use with black powder. Brownells Christmas , Issue:2X, Page:014 Big Book Catalog, Issue:68, Page:538 Sinclair, Issue:5B, Page:088

Sinclair Priming Tool Shell Holders SINCLAIR INTERNATIONAL

sinclairintl reloading equipment

Quick View
$6.99
  (68)
    • Check Price
      • Sinclair Priming Tool Shell Holders SINCLAIR INTERNATIONAL

      • Sinclair Priming Tool Shell Holders are designed to workspecifically in your Sinclair Priming Tool. Each shell holderis precision ground from stainless steel for a lifetime of fitand function. 1911, Issue:11, Page:065 Big Book Catalog, Issue:68, Page:531 Sinclair, Issue:5B, Page:023

Wilson Die Bushing - .253 to .302 L.E. WILSON, INC.

sinclairintl reloading equipment

Quick View
$15.49
  (62)
    • Check Price
      • Wilson Die Bushing - .253 to .302 L.E. WILSON, INC.

      • Bushings are available in increments of .001" from .185" through .199" and .218" through .343". The easiest way to tell the bushing size needed is to measure your loaded rounds at the neck. This caliper or micrometer reading indicates bullet diameter plus twice the thickness of the neck. The bushing diameter must measure less than this, we suggest .002" to .003" smaller. Taking into account the spring-back of the case neck after sizing, this would give you .001" to .002" “grip” on the bullet.View other sizes: .185" to .252" .303" to .369" Sinclair, Issue:1B, Page:055 Sinclair, Issue:1B, Page:056

WILSON NECK REAMER L.E. WILSON, INC.

sinclairintl reloading equipment

Quick View
$28.99 - $37.50
  (65)
    • Check Price
      • WILSON NECK REAMER L.E. WILSON, INC.

      • Thick necks can cause high chamber pressures and erratic shooting. Wilson neck reamers remove excess neck material to insure adequate clearance exists between the case neck and the chamber. Also, these reamers can be used when forming wildcats from a parent case. Reamers are used in the Wilson trimmer in place of the trimmer cutter. Standard reamers are sized for use on fired, unsized cases and measure .0025" - .003" larger than bullet diameter. Custom size reamers can be ground (allow 6-8 week delivery). Sinclair, Issue:5B, Page:011 Sinclair, Issue:5B, Page:038

RANGEMASTER 2000 ELCECTRONIC SCALE RCBS

sinclairintl reloading equipment

Quick View
$119.99
  (38)
    • Check Price
      • RANGEMASTER 2000 ELCECTRONIC SCALE RCBS

      • The RangeMaster 2000 high-performance electronic scale handles up to 2,000 grains with +/-0.1 grain accuracy to precisely measure powder, bullets, cases or loaded cartridges. It provides right- or left-handed operation and a wealth of big-time features. Compact size and the ability to operate on AC or DC power, make it perfect for use on the bench or at the range. The touchscreen LCD is easy to read and operate, and provides an auto shut off function to save the battery. The scale is fast and easy to calibrate with the two included calibration/check weights. This scale is designed for serious shooters who want the best, high-tech scale on the market, and it delivers!

PRO 1000 PROGRESSIVE PRESSES LEE

sinclairintl reloading equipment

Quick View
$119.99 - $189.99
  (53)
    • Check Price
      • PRO 1000 PROGRESSIVE PRESSES LEE

      • Progressive 3-hole reloading kit Includes: Pro 1000 Press,  Dies (Pistol calibers include Carbide 3 die sets, Rifle calibers include Pacesetter 3 die sets including rifle charging die), turret, shell plate, Pro Auto-Disk powder measure, double disk kit, case feeder, and priming system. Primers and powder are fed only if a case is present Comes with roller handle upgrade Standard unit does not come with Turret, Shell Plate, Powder Measure, Dies & Case Feeder. Unit only accepts the Lee 3 Hole Turret. CCI &  Remington primers are the only Lee approved primers to be used in these Pro 1000 Presses. 1911, Issue:11, Page:067