Categories


TYPE S-NECK BUSHING DIES, CATEGORY III CARTRIDGES REDDING

sinclairintl reloading equipment

Quick View
$59.99 - $89.99
 
    • View
      • TYPE S-NECK BUSHING DIES, CATEGORY III CARTRIDGES REDDING

      • Bushing Neck Sizing Die utilizes interchangeable bushings for precise case neck resizing, allowing the reloader to control the amount of neck sizing on his cases. A reloader can eliminate oversizing his brass by selecting a bushing correctly sized for his cases and chamber. Available in over 70 calibers with interchangeable bushings in .001inch increments. The decapping rod comes with a standard expander ball or a decapping pin retainer for sizing without the expander ball installed. Adjustable decapping rod allows positioning of the bushing to resize only the portion of the neck desired. Dies supplied without bushings. Sold separately or as part of a set. Sinclair, Issue:5B, Page:038

GEN II UNIVERSAL FLASHHOLE DEBURRING TOOL SINCLAIR INTERNATIONAL

sinclairintl reloading equipment

Quick View
$9.99 - $19.99
 
    • View
      • GEN II UNIVERSAL FLASHHOLE DEBURRING TOOL SINCLAIR INTERNATIONAL

      • The Lastest version of our Model 1000 flash hole deburring tool features stainless steel construction and chip clearance slots which alleviate the tendency of the tool to collect chips in the end of the cutting shaft. This tool is inserted in the case mouth and uses the web of the case as a safety stop. A couple of turns will remove any burrs and leave a small chamfer on the inside edge of the flash hole. Flash hole deburring is a one-time operation. Since variations of case length do not affect the use of this tool, flash hole deburring is most easily performed on brand new brass without trimming. This tool is available as the 05-1000 standard Generation II flash hole tool which consists of the cutting shaft and the tapered guide. For handloaders who perfer a large, comfortable handle, this tool is also available as the 05-1255 which includes the Sinclair large grip handle found on many of our other tools. For handloaders who already own this or our previous Model 1000 Flash Hole Deburring Tool the large Sinclair handle is available separately as the 05-1320.

        Big Book Catalog, Issue:68, Page:528 Sinclair, Issue:5B, Page:002

TYPE S BUSHING NECK DIE SETS REDDING

sinclairintl reloading equipment

Quick View
$109.99 - $169.99
 
    • View
      • TYPE S BUSHING NECK DIE SETS REDDING

      • The Type S Bushing Style Neck Die set proveds reloaders with a simple means to precisely control case neck size and tension. Packaged in a Redding Die Box with a wrench and extra decapping pin, this set includes a Type S Bushing Neck Die and a Body Die.

        Sinclair, Issue:5B, Page:038

BASIC ELECTRONIC TOOL SET STARRETT

sinclairintl reloading equipment

Quick View
$359.99
  (14)
    • Check Price
      • BASIC ELECTRONIC TOOL SET STARRETT

      • This is the perfect measuring tool set for new reloaders or anyone wishing to upgrade to digital electronic tools. The set includes the Starrett 6" Electronic Caliper (#52-7990) and the 1" Electronic Outside Micrometer (#52-7345) in an attractive fitted case. Batteries are included for both tools (CR2450 and SR44). Battery will have to be removed if shipping through the Postal Service and International Orders. Sinclair, Issue:5B, Page:033

LARGE SERIES 2 DIE SETS LEE

sinclairintl reloading equipment

Quick View
$89.99
  (83)
    • Check Price
      • LARGE SERIES 2 DIE SETS LEE

      • Lee Large Series 2 Die sets are to be used with the Classic Cast Press only. Includes full length sizing die, bullet seating die, and instructions. 1-1 1/4 X12 Threads. Does not include shellholder or powder dipper.

DELUXE DIE SET, 17 ACKLEY HORNET REDDING

sinclairintl reloading equipment

Quick View
$249.99
  (37)
    • Check Price
      • DELUXE DIE SET, 17 ACKLEY HORNET REDDING

      • The Redding Deluxe Die Sets include the full length sizing die, standard seating die and th eneck sizing die. Sinclair, Issue:5B, Page:045

ELECTRONIC TUBE MICROMETER STARRETT

sinclairintl reloading equipment

Quick View
$639.99
  (43)
    • Check Price
      • ELECTRONIC TUBE MICROMETER STARRETT

      • Tube micrometers are used to measure the absolute thickness of round tubing walls (case neck wall thickness) to .0001"" accuracy. This American Made Starrett instrument features a high contrast LCD digital readout to make consecutive measurements fast and easy. The friction thimble feature gives you easy and accurate repeatability, measures to .00005"" or 0.001mm, non glare black frame and satin chrome thimble, carbide anvil face and long life (CR2450) coin cell battery. Micrometer shuts off after 30 minutes of inactivity and comes on with restart motion to the last reading so zero is maintained. Digital output to any capable computer or recorder is possible with optional cables. Comes with one battery and instructions. Made in the USA. Sinclair, Issue:3A, Page:040

STANDARD 1' OUTSIDE MICROMETER STARRETT

sinclairintl reloading equipment

Quick View
$229.99
  (32)
    • Check Price
      • STANDARD 1' OUTSIDE MICROMETER STARRETT

      • This is the same 1"" micrometer you see in professional machine shops all over the world. This Starrett micrometer measures to .0001"" with superb, repeatble accuracy. Ratchet stop mechanism make it easy for any user to repeat measurements, and carbide anvil faces insure a lifetime of accurate measuring. The micrometer comes with an instruction booklet for reading and adjusting the instrument, an adjustment wrench and plastic case. The 1"" micrometer and 6"" caliper are the basic measuring tools for reloader and shooters. Made in the USA. Sinclair, Issue:5B, Page:033

CASE ACTIVATED POWDER DROP LINKAGE HORNADY

sinclairintl reloading equipment

Quick View
$59.99
  (11)
    • Check Price
      • CASE ACTIVATED POWDER DROP LINKAGE HORNADY

      • The Hornady Case Activated Powder Drop has been re-engineered with quick change-overs in mind. The retainer spring has been re-engineered for smoother function than previous models and the powder drop only dispenses a powder charge when a case is present. Works with the Lock-N-Load AP or other progressive presses that use 7/8" - 14 threads.

DELUXE DIE SET, 30 BR REDDING

sinclairintl reloading equipment

Quick View
$259.99
  (63)
    • Check Price
      • DELUXE DIE SET, 30 BR REDDING

      • The Redding Deluxe Die Sets include the full length sizing die, standard seating die and th eneck sizing die. Sinclair, Issue:5B, Page:045

DELUXE DIE SET, 6.5MM BR REDDING

sinclairintl reloading equipment

Quick View
$259.99
  (44)
    • Check Price
      • DELUXE DIE SET, 6.5MM BR REDDING

      • The Redding Deluxe Die Sets include the full length sizing die, standard seating die and th eneck sizing die. Sinclair, Issue:5B, Page:045

EXPLORER RELOADING KIT RCBS

sinclairintl reloading equipment

Quick View
$289.99
  (93)
    • Check Price
      • EXPLORER RELOADING KIT RCBS

      • RCBS® has compiled some of the most important tools and equipment reloaders need in this kits. The Explorer includes solid, reliable reloading tools. Includes: Reloader Special™-5 press  Uniflow™ Powder Measure  1,500-grain Digital Pocket Scale  Nosler 7th Edition Reloading Manual  Hand Priming Tool  Universal Case Loading Block  Debur Tool  Powder Funnel  Case Slick® Spray Lube  Powder Trickler-2 Sinclair, Issue:5B, Page:064

BLACK POWDER MEASURE RCBS

sinclairintl reloading equipment

Quick View
$139.99
  (4)
    • Check Price
      • BLACK POWDER MEASURE RCBS

      • One pound capacity Aluminum hopper and cap with a non static powder level indicator shows you how much powder is left in the hopper The brass non-sparking metering cylinder and adjustment screw are a lso features that the black powder enthusuast is looking for 120 grain charge capacity Perfect unit for black powder and cowboy action shooters

TYPE S NECK DIE, 6.5-308 WIN REDDING

sinclairintl reloading equipment

Quick View
$139.99
  (26)
    • Check Price
      • TYPE S NECK DIE, 6.5-308 WIN REDDING

      • The Bushing Neck Sizing Die by Redding provides reloaders with a 7/8"" - 14 die that utilizes interchangeable bushings for precise case neck resizing. This allows the reloader to control the amount of sizing being done to his cases. A reloader can eliminate oversizing his brass by selecting a bushing just right for his cases and chamber. Available in 53 calibers with interchangeable bushings in .001 increments. The decapping rod is supplied with a standard size expander ball to ensure that the inside neck diameter is round and true for proper bullet fit, and a decapping pin retainer for sizing without the expander ball installed. Adjustable decapping rod allows positioning of the bushing to resize only the portion of neck length desired. Dies supplied without bushings. Sold separately or as part of a set.

COMP NECK DIE, 6.5-308 WIN REDDING

sinclairintl reloading equipment

Quick View
$149.99
  (55)
    • Check Price
      • COMP NECK DIE, 6.5-308 WIN REDDING

      • This neck sizing die with interchangeable bushings brings an advanced level of technology and precision to shooters in all disciplines. Similar in concept to the Redding Competition Seating die, the cartridge case is completely supported and aligned with the sizing bushings before sizing begins. As the sizing starts, the case remains supported in the tightly chambered sliding sleeve while the floating sizing bushing centers on the case neck. The micrometer adjustment of the bushing position provides precise conrol to the desired amount of neck sizing length. Dies supplied without bushings. Dies sold separately or as part of a set.

MEC 650N SHELL PRESS MEC RELOADING

sinclairintl reloading equipment

Quick View
$353.99 - $383.99
  (4)
    • Check Price
      • MEC 650N SHELL PRESS MEC RELOADING

      • The MEC 650N is a true progressive reloader that gives you a completely reloaded shell with each stroke of the lever, working on six shells at once. Automatic primer feed is standard–all you have to do is fill the hopper with a full box of primers and begin. The MEC 650N does not resize except as a separate operation, and is ideal for the reloader who wants to resize and inspect as a separate operation. Three crimping stations start the crimp, close the crimp, and taper the shell for proper feeding in pump or automatic shotguns. Available in 12, 28 gauge, and .410 bore, and includes three powder bushings for the particular gauge/bore. Die sets are not available to convert the 650N to other gauges. A conversion kit to reload 3" shells is available. Sinclair, Issue:2A, Page:072

MEC 8567N GRABBER SHELL PRESS MEC RELOADING

sinclairintl reloading equipment

Quick View
$487.99 - $529.99
  (50)
    • Check Price
      • MEC 8567N GRABBER SHELL PRESS MEC RELOADING

      • The 8567N Grabber gives you high-speed, efficient operation with unbeatable precision. Ten different operations are performed at six stations to produce a finished shell with every stroke of the handle. The Grabber is equipped with a fully automatic primer feed, as well as auto-cycle charging, and our exclusive three-stage crimp. The “Power Ring” resizer gives consistent, accurately-sized shells for optimum gun performance, without interrupting the reloading sequence. Simply put in the wads and shell casings and remove a loaded shell with each pull of the handle. Resizes high and low base shells. Available in 12, 16, 20, 28 gauge, and .410 bore, and includes three powder bushings for the particular gauge/bore. Die sets are not available to convert the 8567N Grabber to other gauges. Optional conversion kits for reloading 3" shells (not available in .410 gauge), or steel shot. Sinclair, Issue:2A, Page:072

50 BMG CUSTOM GRADE 2-DIE SET HORNADY

sinclairintl reloading equipment

Quick View
$279.99
  (13)
    • Check Price
      • 50 BMG CUSTOM GRADE 2-DIE SET HORNADY

      • The Hornady Custom Grade Dimension 50 BMG Die Sets are guaranteed not to wear or break during use. This 1-1/2 inch-12 threaded die set includes the Full Length Sizer Die with Decapping Unit and Seater Die with Bullet Seater Plug. Sinclair, Issue:3A, Page:087

NECK DIE, 375 REM ULTRA MAG RCBS

sinclairintl reloading equipment

Quick View
$37.99
  (26)
    • Check Price
      • NECK DIE, 375 REM ULTRA MAG RCBS

      • RCBS Neck Die, 375 Rem Ultra Mag Sinclair, Issue:5A, Page:055

Hornady Lock-N-Load Progressive Press/Bench Kit HORNADY

sinclairintl reloading equipment

Quick View
$749.99
  (92)
    • Check Price
      • Hornady Lock-N-Load Progressive Press/Bench Kit HORNADY

      • If you’ve been meaning to get set up for reloading—or upgrade your current setup—but haven’t had the time to get “’round to it,” here’s your chance! These combos pair up Bald Eagle’s sturdy, space-saving workbench with four popular reloading kits, so whether you’re a novice or a seasoned reloader, one of these combos is right for you. The laminated hardwood reloading bench is sturdy enough to mount any of these presses, yet it won’t gobble up a lot of floor space. The 54" x 21" top gives you plenty of room for the press, scale, dies, and other reloading gear. The lower shelf provides plenty of storage. Choose from one of four combos with the RCBS Partner Press kit, Redding Big Boss Pro kit, RCBS Rock Chucker Master reloading kit, or Hornady Lock-N-Load Auto Progressive kit (see the Reloading Kits section of this catalog for full descriptions of each kit). Just add the dies and shellholder (and components) for the caliber you want to reload. Sinclair, Issue:2B, Page:075

DELUXE DIE SET, 30/284 WIN REDDING

sinclairintl reloading equipment

Quick View
$249.99
  (80)
    • Check Price
      • DELUXE DIE SET, 30/284 WIN REDDING

      • The Redding Deluxe Die Sets include the full length sizing die, standard seating die and th eneck sizing die. Sinclair, Issue:5B, Page:045

BIG BOSS PRO PAK WITH BENCH RELOADING KIT REDDING

sinclairintl reloading equipment

Quick View
$599.99
  (89)
    • Check Price
      • BIG BOSS PRO PAK WITH BENCH RELOADING KIT REDDING

      • If you’ve been meaning to get set up for reloading—or upgrade your current setup—but haven’t had the time to get “’round to it,” here’s your chance! These combos pair up Bald Eagle’s sturdy, space-saving workbench with four popular reloading kits, so whether you’re a novice or a seasoned reloader, one of these combos is right for you. The laminated hardwood reloading bench is sturdy enough to mount any of these presses, yet it won’t gobble up a lot of floor space. The 54" x 21" top gives you plenty of room for the press, scale, dies, and other reloading gear. The lower shelf provides plenty of storage. Choose from one of four combos with the RCBS Partner Press kit, Redding Big Boss Pro kit, RCBS Rock Chucker Master reloading kit, or Hornady Lock-N-Load Auto Progressive kit (see the Reloading Kits section of this catalog for full descriptions of each kit). Just add the dies and shellholder (and components) for the caliber you want to reload. Sinclair, Issue:2B, Page:075

375 REMINGTON ULTRA MAG CUSTOM GRADE FULL LENGTH DIE HORNADY

sinclairintl reloading equipment

Quick View
$46.99
  (97)
    • Check Price
      • 375 REMINGTON ULTRA MAG CUSTOM GRADE FULL LENGTH DIE HORNADY

      • Hornady's Custom Grad New Dimension dies are created from select steel that's heat-treated to ensure the durability needed for a lifetime of reloading. Hornady guarantees they'll never wear out or break under normal use. All dies include the popular double-flat Hornady die lock rings installed and a custom plastic box. Hornady dies are grouped in three series for pricing - die construction and quality is equal in each series. Full Length Dies feature Hornady's Zip Spindle, which holds the decap spindle in a lightly threaded collet to make it easy to adjust and center exactly in the die. The decap pins are headed steel, and strong enough to decap crimped military cases. The expander balls are long, smooth, threaded, and elliptical in shape. This reduces or eliminates case neck stretching and keeps expander from pulling loose. Cases may be necked up in these dies without a separate expander. Sinclair, Issue:4A, Page:053

RCBS 50 BMG 1-1/2" Die Kit RCBS

sinclairintl reloading equipment

Quick View
$379.99
  (89)
    • Check Price
      • RCBS 50 BMG 1-1/2" Die Kit RCBS

      • This RCBS 50 BMG Die Kit providesthe reloader with a 50 BMG FullLength Sizer Die, Roll Crimp SeaterDie, Trim Die, Shell Holder,and Ram Priming Unit for theAmmoMaster-2 Press. Everythingneeded to get start loading themassive 50 BMG. Sinclair, Issue:5B, Page:079