Categories


PISTOL CARBIDE FACTORY CRIMP DIES LEE

sinclairintl reloading equipment

Quick View
$19.99
 
    • View
      • PISTOL CARBIDE FACTORY CRIMP DIES LEE

      • Sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability The adjusting screw quickly and easily sets the desired amount of crimp Trim Length is not critical so this extra operation takes less time than it would if cases were trimmed and chamfered A firm crimp is essential for dependable and accurate ammunition, as it eliminates the problems of poor ignition of slow burning magnum powders Made of steel and features an internal carbide ring Carbide dies do not require the use of case lube

SINCLAIR UNIFORMER KIT WITH SCREWDRIVER ADAPTOR SINCLAIR INTERNATIONAL

sinclairintl reloading equipment

Quick View
$59.99
 
    • View
      • SINCLAIR UNIFORMER KIT WITH SCREWDRIVER ADAPTOR SINCLAIR INTERNATIONAL

      • Save money by purchasing our rifle uniformers in one of the two kits we offer. 1) The hand kit (UN-8K) comes with a large rifle uniformer, a small rifle uniformer, and a handle. 2) The power kit (UN-8KP) comes with a large rifle uniformer, a small rifle uniformer, and a screwdriver power adaptor.

        1911, Issue:11, Page:064 Big Book Catalog, Issue:68, Page:528 Sinclair, Issue:5B, Page:003

AR SERIES DIE SETS RCBS

sinclairintl reloading equipment

Quick View
$45.99
 
    • View
      • AR SERIES DIE SETS RCBS

      • A must for the progressive reloader. The RCBS AR Series Die Set features a Small Base sizing die and a Taper Crimp seating die. This combination makes reloading easier for AR-style or semi-auto shooters. The Small Base sizer guarantees that the cartridge will rechamber. The Taper Crimp Seater is more forgiving when various case lengths are loaded at the same time. Case neck crimp bulges and buckled shoulders are virtually eliminated when Taper crimping is used with cannelured bullets.

        Brownells Christmas , Issue:3X, Page:014 Sinclair, Issue:5B, Page:056

3BR MATCH-GRADE POWDER MEASURE REDDING

sinclairintl reloading equipment

Quick View
$49.99 - $169.99
  (76)
    • Check Price
      • 3BR MATCH-GRADE POWDER MEASURE REDDING

      • The Match-Grade Model 3BR was created to be the ultimate powder measure... "out of the box" match ready! Since its creation this powder measure has been helping Silhouette shooters and Benchrest Shooters win matches and set new records. It all started witht he time proven accuracy and reliability of the original Model 3 Powder Measure. The Model 3BR Powder Measure utilizes all of the features of the original Model 3 and to that Redding added the conversion features that Benchrest shooters were looking for. It quickly became their most popular powder measure for two very good reasons... Its broad range of charging cpacity and its performance record. Additional Metering Chambers are availiable. Hangun Metering Chamber has a charge range of 0 to 10 grains. Rifle or Universal Metering CHamber has a charge range of 5 to 100 grains. 1911, Issue:11, Page:068 Big Book Catalog, Issue:68, Page:538 Sinclair, Issue:5B, Page:083

BODY DIES REDDING

sinclairintl reloading equipment

Quick View
$29.49 - $84.99
  (11)
    • Check Price
      • BODY DIES REDDING

      • Body Dies are designed to full length resize the case body, bump the shoulder position for proper chambering, but not size the neck at all. They are made without internal parts and are intended for resizing cases which have become increasingly difficult to chamber after repeated firing. After using a body die, the case should be run through the neck die to achieve proper neck tension. Sold separately or as part of a set. Big Book Catalog, Issue:68, Page:534 Sinclair, Issue:5B, Page:036 Sinclair, Issue:5B, Page:038

76 STYLE TITANIUM NITRIDE BUSHING - .185 TO .252 REDDING

sinclairintl reloading equipment

Quick View
$27.29 - $27.49
  (82)
    • Check Price
      • 76 STYLE TITANIUM NITRIDE BUSHING - .185 TO .252 REDDING

      • Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .253 to .305 .306 to .368 Determining Redding Bushing Size The proper bushing size can be easily determined by measuring the outside neck diameter of your loaded cartridges with a precision micrometer or a dial caliper. Then, simply subtract .001" from the cartridge that had the smallest average neck diameter. This diameter bushing will generally size case necks just enough to create the proper press fit for the bullet. If you are using a Type “S” style die and not turning the outside of your case necks, we suggest using a bushing .002" smaller than your smallest average neck diameter, and using the expander ball included with your Type “S” die. This size bushing will still give you minimal sizing (maximizing the life of your brass) and the expander ball will insure that each cartridge has the same bullet grip. Redding has found that when you have cases with neck wall thicknesses on the thin side of the SAAMI tolerance, your fired case will measure considerably larger (.006" to .010" larger) than your loaded rounds. In these circumstances, Redding’s tests have shown that a bushing .001" larger (than the loaded round) may give you the desired bullet grip. Sinclair, Issue:1B, Page:043

MASTER HUNTER DIE SETS REDDING

sinclairintl reloading equipment

Quick View
$131.99
  (60)
    • Check Price
      • MASTER HUNTER DIE SETS REDDING

      • The Master Hunter series combines Redding’s proven Competition Seating Die with a full-length sizing die that lets the hunter load exceptionally consistent ammo to minimize risk of a stuck case or failure to feed that can hinder taking a follow up shot. Full-length sizing also enables use of any SAAMI-standard brand of case without having to resort to bushing sizer die. The result is precise bullet/case neck alignment and finely-tuned bullet seating that lets hunters achieve the utmost performance from their favorite loads. Sinclair, Issue:5B, Page:043

73 STYLE STEEL BUSHING - .306 TO .368 REDDING

sinclairintl reloading equipment

Quick View
$16.49
  (11)
    • Check Price
      • 73 STYLE STEEL BUSHING - .306 TO .368 REDDING

      • Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" Determining Redding Bushing Size The proper bushing size can be easily determined by measuring the outside neck diameter of your loaded cartridges with a precision micrometer or a dial caliper. Then, simply subtract .001" from the cartridge that had the smallest average neck diameter. This diameter bushing will generally size case necks just enough to create the proper press fit for the bullet. If you are using a Type “S” style die and not turning the outside of your case necks, we suggest using a bushing .002" smaller than your smallest average neck diameter, and using the expander ball included with your Type “S” die. This size bushing will still give you minimal sizing (maximizing the life of your brass) and the expander ball will insure that each cartridge has the same bullet grip. Redding has found that when you have cases with neck wall thicknesses on the thin side of the SAAMI tolerance, your fired case will measure considerably larger (.006" to .010" larger) than your loaded rounds. In these circumstances, Redding’s tests have shown that a bushing .001" larger (than the loaded round) may give you the desired bullet grip. Sinclair, Issue:1B, Page:043

Sinclair Meplat Trimmers SINCLAIR INTERNATIONAL

sinclairintl reloading equipment

Quick View
$13.99 - $49.99
  (24)
    • Check Price
      • Sinclair Meplat Trimmers SINCLAIR INTERNATIONAL

      • The Sinclair Meplat Trimmer is a handcranked tool which will quickly and accurately uniform the bullet tips (meplats) of long range bullets or loaded ammunition. This tool includes a caliber specific Delrin™ housing, tool steel cutter, aluminum frame and a comfortable crank handle. Additional Delrin™ housings (see chart below) may be purchased to change calibers. We suggest trimming approximately .005" of material from the bullet tips which will uniform the ballistic coefficient (B.C.) with a B.C. reduction of about 2%. The Meplat Trimmer is easy to set up and adjust to the trim cut you desire. We also suggest sorting long range match bullets by base to give length using our Sinclair Bullet Sorting Stand or our comparators prior to trimming meplats. Sinclair, Issue:5B, Page:006

TRIM-IT II CASE TRIMMER ACT COLEMAN

sinclairintl reloading equipment

Quick View
$19.99 - $129.99
  (95)
    • Check Price
      • TRIM-IT II CASE TRIMMER ACT COLEMAN

      • The TRIM-IT II mounts to any standard drill or drill press, making your case trimming faster and a whole lot easier. The adjustable 3-way cutter features a 3-sided carbide blade that allows you to trim, chamfer, and de-burr virtually any caliber of rifle or pistol brass. It features a built-in micrometer that allows for supremely accurate cut-length control and quick adjustability. The TRIM-IT II is not caliber specific, interchangeable dies are available but sold separately.

RIMMED & BELTED RIFLE CHAMBERING REAMERS CLYMER

sinclairintl reloading equipment

Quick View
$115.00
  (29)
    • Check Price
      • RIMMED & BELTED RIFLE CHAMBERING REAMERS CLYMER

      • Finest Workmanship & Quality; Made In USA From M-7 High Speed SteelMade by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.Note: If you do not see the caliber you are looking for below, please feel free to contact our Special Orders Department, as many additional items are avaliable from Clymer. Big Book Catalog, Issue:68, Page:493 Mini-Catalogs, Issue:15, Page:007

HOT TUB SONIC CLEANER HORNADY

sinclairintl reloading equipment

Quick View
$15.49 - $459.99
  (65)
    • Check Price
      • HOT TUB SONIC CLEANER HORNADY

      • The Hornady® Hot Tub™ takes sonic cleaning to a whole new level.  Featuring a 9 liter capacity, the Hot Tub™ is long enough to accommodate and clean a 16 inch AR-15 upper.  In addition to having 4 transducers, there is also a heating element that enhances cleaning action, which is especially useful when cleaning gun parts. Combined with One Shot® Sonic Clean™ solution, the microjet action of the Hornady® Hot Tub™ removes carbon residue and other debris from cartridge cases, gun parts and other metal equipment. Unlike traditional tumblers, sonic cleaners can clean internal and external surfaces of cartridge cases and primer pockets. One 1.7 quart inner tank comes with the unit and can be used in the main tank for cleaning multiple smaller batches or to use separate solutions at the same time.  Additional inner tanks can be purchased separately. Hanging cords have been integrated into the design to allow large objects to take full advantage of the ultrasonic energy.  Additionally, the Hot Tub® features integrated drain pans in the lids, a small parts basket, a degas function and 5 temperature settings from 100-140°F.  Hot Tub® main tank dimensions: (9 Liters / 2.3 Gallons) 25.5" x 7.0" x 4" / Internal Divider Tank dimensions (sold separately): 6.7" x 4.7" x 3.2" (1.6 Liters / 1.7 Quarts) 1911, Issue:11, Page:069 Big Book Catalog, Issue:68, Page:540 Sinclair, Issue:5B, Page:076

BREECH LOCK CHALLENGER KIT LEE

sinclairintl reloading equipment

Quick View
$130.99
  (43)
    • Check Price
      • BREECH LOCK CHALLENGER KIT LEE

      • Contains Breech Lock Challenger Press and one Breech Lock quick-change bushing, Perfect Powder Measure, Lee Safety Scale, Powder Funnel, cutter and lock stud, chamfer tool, sizing lube, primer pocket-cleaning tool, Auto-Prime XR and a set of Auto-Prime Shell Holders Popular "O" frame design w/ a 4 1/2" opening Featuring the Breech Lock quick change die system Spent primer tube is effective and easy to empty *Standard 7/8"-14 Threaded Dies Made from Solid Aluminum 1911, Issue:11, Page:067 Big Book Catalog, Issue:68, Page:536 Sinclair, Issue:5B, Page:066

LENGTH GAUGE HORNADY

sinclairintl reloading equipment

Quick View
$32.99 - $39.99
  (25)
    • Check Price
      • LENGTH GAUGE HORNADY

      • The Hornady Lock-N-Load OAL Gauge (formerly Stoney Point) is an extremely easy to use tool. It only takes a couple of minutes to find the overall length for a particular bullet. The tool is threaded on one end to accept specially modified cartridge cases. Once threaded onto the tool, a bullet is inserted into the cartridge. The tool is then inserted into the chamber of your rifle. The push rod on the tool is used to push the bullet up against the rifling. The rod is then locked in place and the tool can be removed from the rifle. You then measure across the base of the cartridge and the top of the bullet with your dial calipers (use of a bullet comparator at this time is highly recommended) to obtain the OAL. If you want to check another type of bullet, insert the new bullet into the tool and repeat steps. There are two different models of OAL Gauge tools available. Straight is designed specifically for bolt-action rifles and single shot rifles. The Curved  model is designed for autoloaders and lever actions. Both models utilize the same modified cases. Either tool will work on the AR-15 type rifles. This tool is excellent for periodically checking the throat erosion of a rifle barrel. Great for checking out used rifles. There are over 60 different modified cases available to use with this tool. Big Book Catalog, Issue:68, Page:508 Big Book Catalog, Issue:68, Page:531 Mini-Catalogs, Issue:15, Page:018 Mini-Catalogs, Issue:15, Page:020 Sinclair, Issue:5B, Page:026

WFT 2 TRIMMER LITTLE CROW GUNWORKS, LLC.

sinclairintl reloading equipment

Quick View
$26.99 - $71.99
  (76)
    • Check Price
      • WFT 2 TRIMMER LITTLE CROW GUNWORKS, LLC.

      • The WFT 2 is the next generation of WFT trimmers. The two main improvements are the ability to trim up to 45 caliber and interchange trim chambers. The WFT 2 has a half inch shaft and requires a half inch chuck to drive it. The feature most customers asked for was the ability to interchange trim chambers.  Instead of press fitting the trim chambers, like the original WFT, the trim chambers on the WFT 2 are a slight slip fit in bearing with a groove cut for an O-ring which creates a press fit. Changing out trim chambers is accomplished by removing the cutter and pushing out the trim chamber with the knock-out dowel that is provided. Installing the trim chamber is accomplished by setting the trim chamber on a flat surface and steadily pushing the housing onto the trim chamber. Setting the cutter depth is easily adjusted by placing a “master case” in the trim chamber and sliding the cutter up to the case mouth and tightening down the set screws. Trimming is just as precise and clean as with our original trimmer. The trim chamber selection on the WFT 2 is by specific cartridge, but still trims by case family-just order the largest chamber in the family that you intend to trim. This unit and its inserts do not chamfer or deburr the case moouth of the cartridge case as it is trimmed. If you can't find the cartridge you need, please contact our Special Order Department at 800-741-0015 Mini-Catalogs, Issue:15, Page:017 Sinclair, Issue:5B, Page:009

COMPETITION BUSHING NECK DIES REDDING

sinclairintl reloading equipment

Quick View
$109.99 - $164.99
  (16)
    • Check Price
      • COMPETITION BUSHING NECK DIES REDDING

      • Similar in design concept to Reddings Competition Seating Die, the cartridge case is completely supported and aligned with the sizing bushing before the sizing process begins. As the sizing process starts, the cartridge case remains supported in the tightly chambered, sliding sleeve as it moves upward while the resizing bushing self-centers on the case neck. The decapping rod is maintained in precise alignment by using the internal parts of the die as a linear support much like that of a firing pin. Meanwhile, the micrometer adjustment of the bushing position delivers precise control to the desired amount of neck length to be sized. These dies were designed for use by Competition Shooters who have meticulously perared their cartridge cases and do not wish to use a sizing button, however, carbide size button kits are available separately. Bushings and shellholders sold separately Big Book Catalog, Issue:68, Page:534 Sinclair, Issue:5B, Page:036 Sinclair, Issue:5B, Page:038

WILSON STAINLESS NK DIES L.E. WILSON, INC.

sinclairintl reloading equipment

Quick View
$56.99
  (50)
    • Check Price
      • WILSON STAINLESS NK DIES L.E. WILSON, INC.

      • These stainless steel neck dies from L.E. Wilson are the most accurate and easiest to use straight line dies on the market. These companion stainless steel neck dies are identical to standard Wilson neck dies except the body and decap pin are stainless. Neck dies accept Wilson, Redding, or our carbide bushing. These dies are beautifully made, accurate and will never rust or corrode. Be sure to order the Sinclair neck die base (APB) for arbor press use. Sinclair, Issue:5B, Page:049

SINCLAIR ARBOR PRESS SINCLAIR INTERNATIONAL

sinclairintl reloading equipment

Quick View
$119.99
  (74)
    • Check Price
      • SINCLAIR ARBOR PRESS SINCLAIR INTERNATIONAL

      • Our Sinclair Arbor Press was designed specifically for use with hand dies, both in the field and on your workbench. It does not need to be clamped down for use. This arbor press features quality construction throughout and fits easily into your reloading box for trips to the range. Constructed with a solid stainless steel post and featuring a stainless steel rack and pinion design, our arbor press functions flawlessly with all neck sizing and bullet seating hand dies. Ratchet style height adjustment knob allows easy raising and lowering of the press head position. The Sinclair Press is also sold as part of a complete hand die reloading kit. This press is not intended for use with full length resizing dies. Sinclair, Issue:5B, Page:058

PISTOL DIE SETS RCBS

sinclairintl reloading equipment

Quick View
$55.99 - $56.99
  (98)
    • Check Price
      • PISTOL DIE SETS RCBS

      • RCBS Carbide Pistol 3-Die Set includes a carbide sizer die which eliminates the need for case lubrication and cleaning of cases before use. Also includes an expander die for expanding and belling case mouths and a seater die with profile or taper crimp. 1911, Issue:11, Page:066 Brownells Christmas , Issue:5X, Page:012 Big Book Catalog, Issue:68, Page:533 Sinclair, Issue:5B, Page:054

PACESETTER RIFLE DIE SETS LEE

sinclairintl reloading equipment

Quick View
$31.99 - $35.99
  (37)
    • Check Price
      • PACESETTER RIFLE DIE SETS LEE

      • 3-Die Set includes Full Length Sizing Die, Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data Fits all 7/8"-14 reloading presses

SINCLAIR EXPANDER MANDREL - OVERSIZED SINCLAIR INTERNATIONAL

sinclairintl reloading equipment

Quick View
$9.99
  (75)
    • Check Price
      • SINCLAIR EXPANDER MANDREL - OVERSIZED SINCLAIR INTERNATIONAL

      • Our neck turning tool mandrels are made from high grade stainless steel on Precision turning centers. The shape, finish, and size are the result of years of use and experimentation by many hand loaders. All of our mandrels fit both our NT-3000 and NT-1000 neck turning tools and most of our older model neck turning tools. Our neck turning tool mandrels measure approximately about .002"" less than the bullet diameter for the caliber. Our expander mandrels are made .001"" larger than the turning mandrels. Using an expander mandrel prior to neck turning sizes the case to fit the neck turning mandrels perfectly. This correct fit makes the turning process more precise and much easier. Any of the mandrels can be used to ""neck"" cases up to the next caliber when used with the NT-EXP (Expander Body). Sinclair, Issue:5B, Page:019

COMPETITION HANDGUN SEATER DIES REDDING

sinclairintl reloading equipment

Quick View
$85.99
  (37)
    • Check Price
      • COMPETITION HANDGUN SEATER DIES REDDING

      • These seaters have a precision fitting bullet seating stem which is spring loaded. As the bullet and case move up into the seater positive alignment is insured. The micrometer adjustment on the seating stem simplifies setting and recording bullet seating depth. The micrometer is calibrated in .001 inch increments, is infinitely adjustable, and has a zero set feature. This seater has no crimping features. Crimping should be done with a separate Redding Profile Crimp or Taper Crimp die. The Competition seating die for the handgun and straight wall cases is compatible with most progressive reloading presses. Big Book Catalog, Issue:68, Page:535 Sinclair, Issue:5B, Page:042

PRO 4-20 LEAD MELTER LEE

sinclairintl reloading equipment

Quick View
$69.99 - $73.99
  (88)
    • Check Price
      • PRO 4-20 LEAD MELTER LEE

      • Large diameter high capacity pot, holds approximately 20 pounds of lead. A generous 3 3/4" inches of clearance under the spout accepts all brands of bullet molds and most sinker molds. It also includes an adjustable mold guide to quickly and accurately position any mold for pouring. This second generation design incorporates the famous Lee patented high-efficiency design and dependable remote sensing thermostat, now in a dust tight housing. Long life 700-watt tubular heating element assures quick melting and rapid recovery. New micro adjustable, flow control valve adjusts instantly with a twist of the screw driver. Front mounted low maintenance replaceable valve spout allows instant reseating with a turn of a screwdriver. This melter will reach between 450 and 900 degrees Fahrenheit. Cast at the lowest temperature that will give good fill out. 650 degrees is a good starting point. Sinclair, Issue:5B, Page:089

MICRO-ADJUST BULLET SEATERS SINCLAIR/L.E. WILSON

sinclairintl reloading equipment

Quick View
$169.99 - $199.99
  (29)
    • Check Price
      • MICRO-ADJUST BULLET SEATERS SINCLAIR/L.E. WILSON

      • We gathered our customers ideas and reloading experience with hand dies, and partnered with the experts who make them, to introduce the new Sinclair/L.E. Wilson Micro-Adjust Bullet Seater. It features easy-adjust seating depth capabilities with a simple turn of the die body. Sinclair/L.E. Wilson Micro-Adjust Bullet Seaters are detent-bearing driven with positive “click”  increments of .0005” for fast, accurate bullet seating depth adjustments. Here are the details of construction: Each seater stem is custom fitted to the seater body ensuring close tolerance fit Precision-cut threads allow bullet seating depth adjustment in .0005” increments Graduated scale for repeated use with different bullets and seating depths Micro-Adjust “clicks” via stainless springs and stainless ball bearings Constructed of 416 Stainless Steel with precise, laser-etched adjustment scale Made in the USA by L.E. Wilson with 85 years of inline die experience We feel these dies are the finest available in terms of quality, construction, and performance. Available in 12 popular cartridge offerings. Sinclair, Issue:5B, Page:051

SINCLAIR/STARRET CASE NECK MICROMETER SINCLAIR INTERNATIONAL

sinclairintl reloading equipment

Quick View
$179.99
  (9)
    • Check Price
      • SINCLAIR/STARRET CASE NECK MICROMETER SINCLAIR INTERNATIONAL

      • The Sinclair Case Neck Micrometer is built around a Starrett micrometer head capable of measuring in .0001inch increments.This tool is designed specifically for handloaders to accurately measure case neck wall thickness. The micrometer head and anvil are completely adjustable so the handloader can measure the neck wall thickness right up to the junction of the case neck and shoulder. These adjusting features, plus the ratchet control built into the micrometer head, allow the user to zero the tool to suit their own feel and their own needs. The tool is mounted to a stainless steel base and allows the handloader to have both hands free to use when measuring brass. The micrometer head is mounted in an anodized aluminum frame, and the anvil is made of stainless steel. This micrometer will work for .17 caliber cases and larger. The tool comes pre-zeroed. MADE IN THE U.S.A. Sinclair, Issue:5B, Page:030

WILSON PISTOL MAX CASE GAGES L.E. WILSON, INC.

sinclairintl reloading equipment

Quick View
$22.99
  (42)
    • Check Price
      • WILSON PISTOL MAX CASE GAGES L.E. WILSON, INC.

      • The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Pistol Max Gages: Used to check all critical dimensions of the pistol case - mouth diameter, base diameter, rim thickness and diameter, case overall length and bullet diameter Brownells Christmas , Issue:4X, Page:019 Big Book Catalog, Issue:68, Page:532 Sinclair, Issue:5B, Page:035

BULLET PULLER COLLET RCBS

sinclairintl reloading equipment

Quick View
$11.99 - $12.79
  (14)
    • Check Price
      • BULLET PULLER COLLET RCBS

      • This collet type bullet puller from RCBS will pull jacketed bullets from .17 caliber through 50 caliber with the appropriate collet (order collets separately from chart) installed in the puller body. Puller can be used in any 7/8-14 single stage reloading press. RCBS states that the collets do not damage jacketed bullets. Not for rimfire ammunition. Sinclair, Issue:5B, Page:021