Categories


SINCLAIR NT-1000 NECK TURNING TOOL KIT W/STORAGE CASE SINCLAIR INTERNATIONAL

reloading

Quick View
$109.99
 
    • View
      • SINCLAIR NT-1000 NECK TURNING TOOL KIT W/STORAGE CASE SINCLAIR INTERNATIONAL

      • Neck turning is a case prep operation that we and many of our customers find beneficial to top notch accuracy and easy to do with our tools. This new neck turning kit includes our Standard Neck Turning Tool (NT-1000), neck expander die, stainless steel mandrels for both expanding and neck turning, handle and our storage case with cutouts for nearly all Sinclair neck turning accessories. Everything needed to get started in neck turning. Sinclair, Issue:5B, Page:018

UNIVERSAL CASE PREP CENTER RCBS

reloading

Quick View
$399.99
 
    • View
      • UNIVERSAL CASE PREP CENTER RCBS

      • The Universal Case Prep Center is powdered by a 24-VDC motor that provides 9 inch-pounds of torque. Reloaders can also adjust the output shaft's RPM. There are six stations for case preparation; four offer up to 360 RPM, and two provide up to 550 RPM. The spring-loaded feed system offers hands-free trimming, and a single lever loads and unloads cases, then disengages them from the cutter. It has an ambidextrous design and the spring loaded shell holder accommodates case head diameters from .250 to .625 inch, and lengths from .720 inch to 3.375 inches. Micrometer adjustment allows for fast, precise cuts. A shell holder carrier assembly makes adjusting trim length quick and easy. The Universal Case Prep Center includes primer pocket brushes, chamfer and debur tools, and alignment gauge. Includes .22, .24, .25, .27, .28, .30, .35, .44, and .45 pilots; large and small primer pocket brushes; inside and outside chamfer/debur tool; and aligment tool.

        Sinclair, Issue:5B, Page:007

RAMSHOT X-TERMINATOR POWDERS RAMSHOT POWDER

reloading

Quick View
$23.99 - $165.99
 
    • View
      • RAMSHOT X-TERMINATOR POWDERS RAMSHOT POWDER

      • Ramshot powders are double-based, spherical-shaped, smokeless powders that meter easy, burn clean and produce high velocities. Excellent lot-to-lot consistencies for repeatable accuracy between loads. X-Terminator is designed for the high volume, .223 varmint hunter who demands a clean burning, easy metering powder. Produces excellent velocities in .222 Rem, .223 Rem, and .22 BR. Sinclair, Issue:5B, Page:097

CROSS BOLT DIE LOCK RING FORSTER

reloading

Quick View
$4.99 - $44.99
  (74)
    • Check Price
      • CROSS BOLT DIE LOCK RING FORSTER

      • Forster Products has solved two problems common to many reloaders: misaligned die locking rings and damaged die threads. Either of those situations can occur when a locking ring cross-screw is fastened too tightly or if the locking ring threads are improperly mated with the die threads. Forster's locking ring design features an easy to use cross bolt that connects the two ends of the ring instead of a traditional screw design that tightens directly into the threads of the die. The result is a more reliable alignment with no canting and no damage to the die threads which remain untouched by the cross bolt. Tightening or loosening the cross bolt requires a 7/64" hex wrench. The Forster cross bolt locking ring will fit any manufacturer's standard 7/8" X 14 dies. They are supplied with all Forster's high quality Bench Rest® Dies. Big Book Catalog, Issue:68, Page:535 Mini-Catalogs, Issue:15, Page:019 Sinclair, Issue:5B, Page:048 Sinclair, Issue:5B, Page:062 Sinclair, Issue:5B, Page:069

PRESS TYPE SHELLHOLDERS REDDING

reloading

Quick View
$9.99
  (27)
    • Check Price
      • PRESS TYPE SHELLHOLDERS REDDING

      • New tapered design allows for easy case entry. Machined to very close tolerances to fit your cases perfectly and eliminate potential problems. The universal design fits all popular presses. Only Redding shellholders are heat treated and have outside knurling to make them easy to handle and change. View Redding Shellholder Chart. Sinclair, Issue:5B, Page:022

HODGDON POWDER BL-C(2) HODGDON POWDER CO., INC.

reloading

Quick View
$23.99 - $167.99
  (90)
    • Check Price
      • HODGDON POWDER BL-C(2) HODGDON POWDER CO., INC.

      • Hodgdon Powder offers one of the largest selections of quality smokeless propellants for rifle reloading. These powders are very popular with high power and long-range shooters, varmint hunters, and benchrest shooters. Hodgdon Spherical Powders are great all-round propellants. These powders give you high performance and consistent charge weights through your powder measure. Works great for smaller target and varmint cartridges such as the 17 Remington, 223 Remington, 22 PPC. Originally developed for the 308 Winchester with the 7.62 NATo loading. Big Book Catalog, Issue:68, Page:544 Sinclair, Issue:5B, Page:095

CARBIDE BUTTON KIT - STD/TYPE S REDDING

reloading

Quick View
$31.79
  (37)
    • Check Price
      • CARBIDE BUTTON KIT - STD/TYPE S REDDING

      • Upgrade your Redding Standard and Type S dies with a carbide sizing button. Makes inside neck sizing smoother and easier without lubrication. Available for bottleneck cartridges in 22 through 30 caliber. The carbide button free floats on the decapping rod allowing it to self-center itself in the case neck. The kit comes complete with a carbide button, retainer, and spare decapping pin. Decap rod not included. Not intended for use on dies other than Redding standard and Type S neck and full length dies. Sinclair, Issue:5B, Page:038 Sinclair, Issue:5B, Page:040 Sinclair, Issue:5B, Page:041 Sinclair, Issue:5B, Page:045

ONCE-FIRED PROCESSED PISTOL BRASS BRASS GUYS

reloading

Quick View
$103.99 - $139.99
  (85)
    • Check Price
      • ONCE-FIRED PROCESSED PISTOL BRASS BRASS GUYS

      • Once fired Military brass. Mixed Headstamps, approximately 1,000 pieces per jug. All brass has been washed, tumbled, deprimed, swaged and de-crimped, full length sized, and trimmed to SAAMI Specs.Some minor case mouth dents may occur during shipping so its suggested you neck size the brass before loading. A great econmical way to reload. Spend more time shooting and less time scrounging for range brass. 1911, Issue:11, Page:070 Sinclair, Issue:5B, Page:120

MILITARY RIFLE PRIMERS CCI

reloading

Quick View
$41.99 - $199.99
  (33)
    • Check Price
      • MILITARY RIFLE PRIMERS CCI

      • Military-style semi-auto rifles seldom have firing pin retraction springs. If care is not used in assembling ammunition, a “slam-fire” can occur before the bolt locks. The military arsenals accomplish this using different techniques and components—including different primer sensitivity specifications—from their commercial counterparts. CCI makes rifle primers for commercial sale that matches military sensitivity specs that reduce the chance of a slam-fire when other factors go out of control. If you’re reloading for a military semi-auto, look to CCI Military primers. Effective slam-fire prevention requires more than special primers. Headspace, chamber condition, firing pin shape and protrusion, bolt velocity, cartridge case condition, and other factors can affect slam-fire potential. Mil-spec sensitivity Initiator mix optimized for ball/spherical propellants Use the same data as CCI Magnum primers   Big Book Catalog, Issue:68, Page:545 Sinclair, Issue:5B, Page:117

LOCK-N-LOAD AUTO PROGRESSIVE PRESS HORNADY

reloading

Quick View
$27.99 - $449.99
  (3)
    • Check Price
      • LOCK-N-LOAD AUTO PROGRESSIVE PRESS HORNADY

      • This automatic, five station press lets you switch your reloading dies and accessories without changing the entire tool head. With a quick twist, the Lock-N-Load inserts allow you to engage or disengage your accessories in each station. The solid top-plate construction means you’ll never have to purchase additional tool plates. You may also use 7⁄8-14" dies and powder measures from your other favorite manufacturers by installing Lock-N-Load bushing inserts (listed below). The Hornady automatic case feeder is available by special order at this time. It has one of the highest torque motors of any progressive press and will feed hundreds of rounds per hour. Adapts to your press and feeds each cartridge to your shell plate – ask any of our customer service representatives for assistance.Features Include: Lock-N-Load Powder Measure: The AP uses Hornady’s full size powder measure which can change powder charges with the press of the button. Hornady utilizes a quickchange measure insert that can be stored with your reloading dies preset to the charge you desire. You’ll never have to adjust your measure back to that favorite load again – just purchase additional inexpensive measure inserts for each of your cartridges. This is the most flexible powder system of any progressive press on the market.Priming System: The primer is dropped in place at the top of the stroke and inserts into the case at the end of each stroke. Slide tray is easily changed from large to small primers and includes primer pick-up tubes to fill the main primer tube.Case Activated Powder Drop: The Case Activated Powder Drop provides the powder charge only when a cartridge is in place. Prevents powder charging errors, or can be set to manual operation to check charges. No powder mess to clean up, automatic case indexing prevents double charges.Case Retainer: The Case Retainer allows you to quickly and easily remove or replace a case from the shell plate at any point in the cycle without extra retaining buttons. Retainer fits all calibers.Automatic Indexing and Case Ejector: The Lock-N-Load automatically advances the cases to the next station with the smoothest indexing of any press we’ve operated. It rotates every half stroke (shorter movements) to lessen the chance of powder spillage. At the completion of each round, the case is automatically ejected into the large capacity case catcher (included). All you need in addition to your Hornady AP press is a shell plate and dies to get you started. Ask any of our customer service representatives for help in determining your shell plate size.These other Hornady AP accessories, such as additional Powder Measure Metering Insert, Quick Change Powder Die, and the Powder Cop, enable you to have the fastest cartridge conversion on the market. Ask any of our customer service representatives to explain these upgrade options.Click here for Hornady Shell Plates & Shell Holders chart. 1911, Issue:11, Page:067 Brownells Christmas , Issue:5X, Page:012 Big Book Catalog, Issue:68, Page:535 Sinclair, Issue:5B, Page:062

SINCLAIR BULLET SEATING DEPTH TOOL SINCLAIR INTERNATIONAL

reloading

Quick View
$9.99 - $34.99
  (73)
    • Check Price
      • SINCLAIR BULLET SEATING DEPTH TOOL SINCLAIR INTERNATIONAL

      • The Sinclair Seating Depth Tool has been used for decades by handloaders seeking the most accuracy out of their rifles. We have recently improved our seating depth tool to accommodate 17 and 20 caliber shooters without having to have two tools. Our newest model is made from one fourth inch ground and polished stainless steel with one end turned down for use with 17 and 20 caliber rifles and the other end used for 22 caliber and up. This tool helps you determine the length of a loaded round touching the rifling. This length is generally considered to be the best starting point in load development and the best length for fireforming most cases. The Sinclair Seating Depth Tool will work with most bolt action, single shot and AR type rifles. The tool includes a Delrin action guide for most bolt-action rifles (Remingtons, Savages, Winchesters, and Rugers), a stainless steel measuring shaft, two stainless steel stop collars and complete illustrated instructions. We also make a guide for use in AR-15's, AR-10's, and Tubb's 2000's. Many shooters load single shot rounds longer than magazine length. The guide is a little different than our standard bolt-action guides. This guide inserts into the back of the upper receiver (with the bolt removed). The tool is then used as normal. Big Book Catalog, Issue:68, Page:531 Sinclair, Issue:5B, Page:025

PISTOL CARBIDE 3 DIE SETS LEE

reloading

Quick View
$33.29 - $43.99
  (88)
    • Check Price
      • PISTOL CARBIDE 3 DIE SETS LEE

      • Set includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Shell Holder, Powder Dipper and Instructions/Load Data Carbide dies requires no sizing lube

SINCLAIR CARBIDE TURNING MANDRELS SINCLAIR INTERNATIONAL

reloading

Quick View
$49.99
  (74)
    • Check Price
      • SINCLAIR CARBIDE TURNING MANDRELS SINCLAIR INTERNATIONAL

      • Sinclair stainless steel neck turning mandrels for 17 through 50 caliber cartridges are turned from high grade stainless steel on precision turning centers. Turning mandrels are sized .002" under bullet diameter. The shape and surface of all of our mandrels is the result of years of experimenting by many expert handloaders. Our Carbide turning mandrels are precision ground from solid carbide stock, which yields even closer tolerances. All Carbide mandrels are ground to .002" under bullet diameter. Adjustments on our NT-4000 turning tool will be more consistent with carbide mandrels due to the tighter tolerances of the mandrels. Large caliber (35 to 50 caliber) mandrels fit only the Large Caliber Expander Body and the NT-5000 Turning Tool. Sinclair, Issue:5B, Page:019

COMPETITION PRO CARBIDE DIE SETS REDDING

reloading

Quick View
$154.99 - $169.99
  (39)
    • Check Price
      • COMPETITION PRO CARBIDE DIE SETS REDDING

      • The Competition Pro Series, for use in progressive reloading machines, is a specially prepared three die set. Since the most popular machines do not make use of an expander die, it has been eliminated in the new “Pro Series” sets. The sizing die is the extraordinary Redding Titanium Carbide, complete with a decapping unit. A superior crimp can be accomplished if it is done in a separate operation from the bullet seating. For this reason the “Pro Series” bullet seating die is designed for bullet seating only, with no crimping feature. Our Profile Crimp die is supplied for the final crimping. For cartridges that headspace on the case mouth, a Taper Crimp die is substituted. All dies in the set have a special  large radius at the mouth for easy case entry, a necessary feature for progressive machines. Kit contains a Titanium Carbide Sizing Die, Competition Seating Dia with micrometer adjustments, and a crimp die. Big Book Catalog, Issue:68, Page:535 Sinclair, Issue:5B, Page:042

FULL LENGTH SIZING DIES REDDING

reloading

Quick View
$31.99 - $139.99
  (64)
    • Check Price
      • FULL LENGTH SIZING DIES REDDING

      • These dies size the full length of your cartridge Including the neck and body of the case. Includes a decapping assembly and expander ball. Available individually or in Full Length Die Sets and Deluxe Die Sets. We recommend the use of a headspace gauge when setting up a full length sizing die. Big Book Catalog, Issue:68, Page:534 Sinclair, Issue:5B, Page:040 Sinclair, Issue:5B, Page:041 Sinclair, Issue:5B, Page:043 Sinclair, Issue:5B, Page:044

SINCLAIR DRIVER & CASEHOLDERS SINCLAIR INTERNATIONAL

reloading

Quick View
$14.99 - $29.99
  (2)
    • Check Price
      • SINCLAIR DRIVER & CASEHOLDERS SINCLAIR INTERNATIONAL

      • The Sinclair Driver and Caseholder system is designed to hold and turn your case while you are neck turning, cleaning case necks or case mouth deburring. The caseholders and driver are machined from stainless steel, and the driver has a ¼" hex shaft for use in power screwdrivers or low speed drill motors. The driver is universal to the Sinclair system and will work with all the caseholders. Our Universal Caseholder enables you to use this system with our Sinclair Stainless Shell Holders listed on page 29. Select the appropriate shell holders for your favorite cartridges.. The Universal Caseholder works with the same #05-200 driver as our original caseholders, and it is available as a “kit” with the Driver and Universal Caseholder or individually for those who already have a driver. Remember to order the Sinclair Stainless Shell Holders for your Universal Caseholder if you don’t already have them. This system is a great, inexpensive way to speed up the neck turning process. Also works great for many other case prep operations.**NOTE: When ordering case holders, you will need to order a case holder driver as they are sold separately.** Sinclair, Issue:5B, Page:020

UNIVERSAL HAND PRIMING TOOL RCBS

reloading

Quick View
$63.99
  (91)
    • Check Price
      • UNIVERSAL HAND PRIMING TOOL RCBS

      • Universal shell holder will accept cases from .32 ACP to .45-70 Government Patented safety gate isolates the primer seating operation from the primer supply virtually eliminating the possibility of tray detonation Removable primer tray orients your primers for use and will fit any manufacturers primer packaging Included accessories to seat large and small rifle or pistol primers Big Book Catalog, Issue:68, Page:530 Sinclair, Issue:5B, Page:024

IMR 4350 POWDER IMR POWDERS

reloading

Quick View
$25.99 - $179.99
  (95)
    • Check Price
      • IMR 4350 POWDER IMR POWDERS

      • This is the powder you want for loading the new, shor magnum cartridges from Remington and Winchester when using light to medium weight bullets Big Book Catalog, Issue:68, Page:545 Sinclair, Issue:5B, Page:093

ULTIMATE RIFLE 4-DIE SETS LEE

reloading

Quick View
$48.99
  (23)
    • Check Price
      • ULTIMATE RIFLE 4-DIE SETS LEE

      • Choose this die set for maximum versatility. The set features a full length-resizing die to return brass to factory new dimensions, perfect for reloading brass fired in other guns. The Collet Neck sizing die is used on your fire formed brass giving you best possible accuracy. No case lube required and cases last almost forever. The Easy Adjust Dead Length Bullet seating die foolproofs the bullet seating adjustment, and assures perfect seating depth every time. The Factory Crimp die provides a secure crimp on bullets with or without a crimp groove. In most cases it helps accuracy by providing a uniform higher start pressure and gives the finished cartridge Factory like accuracy and dependability. The set is complete, with shell holder, powder measure and famous Lee load data featuring all common brands of powder organized in a easy to read logical format. Includes a full length sizer, collet necksizer, Easy Adjust Dead Length Bullet Seating Die & Factory Crimp Die.

SINCLAIR HEX STYLE BULLET COMPARATORS SINCLAIR INTERNATIONAL

reloading

Quick View
$19.99
  (55)
    • Check Price
      • SINCLAIR HEX STYLE BULLET COMPARATORS SINCLAIR INTERNATIONAL

      • We have been making these hex style bullet comparators for over 20 years, and believe we make the most accurate tools available. The holes in the Sinclair Bullet Comparators are cut with throating reamers to accurately duplicate the actual throat of a rifle. The comparator is used with calipers, and allows the reloader to accurately measure the length from the major diameter of the bullet to the case head. It also enables you to make accurate seating depth changes to your bullet seater. The Sinclair Comparator does not attach to your calipers, so your calipers are free for other measurements. Machined from stainless steel. There are two different models of Sinclair Comparators to cover bullets calibers from .17 caliber to .338. The first model (09-600) features holes bored and throated for .224, 6mm, .257, 6.5mm (.264), 7mm, and 308. The second model (09-700) has holes throated for .172, .204, .224, .270, .308, and .338 caliber. Mini-Catalogs, Issue:15, Page:016 Mini-Catalogs, Issue:15, Page:018 Sinclair, Issue:5B, Page:027

IMPERIAL SIZING DIE WAX-2 OZ. REDDING

reloading

Quick View
$8.99
  (31)
    • Check Price
      • IMPERIAL SIZING DIE WAX-2 OZ. REDDING

      • Imperial Sizing Die Wax was developed in the early 1970's, and it has been popular with precision reloaders ever since - look in any shooters reloading box at a benchrest match and you will find a tin. Reloaders like Imperial because of its extremely high lubricity and ease of removal. Full length sizing and forming the toughest wildcats is made easier with Imperial Wax. Cases are easily wiped clean with a paper towel. Comes in 2 oz. 1911, Issue:11, Page:068 Big Book Catalog, Issue:68, Page:537 Sinclair, Issue:5B, Page:072

INSTANT INDICATOR REDDING

reloading

Quick View
$99.99
  (90)
    • Check Price
      • INSTANT INDICATOR REDDING

      • This precision made tool allows a hand loader to quickly compare headspace and bullet seating depth within .001". The “Instant Indicator” lets you accurately check the headspace from the case shoulder to the base in a couple of seconds. This information is critical for setting up your sizing die to allow the precise amount of shoulder bump. The use of a dial indicator with this tool makes each measurement easy to read and also accurate. Using the Redding sizing bushing supplied, you can read seating depth for your cartridges. The Instant Indicator enables you to compare bullets to each other by checking the bullet base to give dimension. This is a great feature for those wanting to sort bullets prior to meplat trimming. Dial Indicator sold seperately. Sinclair, Issue:5B, Page:034

ULTRAMAG RELOADING PRESS REDDING

reloading

Quick View
$319.99
  (26)
    • Check Price
      • ULTRAMAG RELOADING PRESS REDDING

      • The UltraMag is the heavy duty workhorse of the Redding line, and is a no-nonsense high quality press. It is our favorite for large jobs and highly recommend it for the reloader needing a large frame press. The leverage system on this press (unlike most others) is connected to the top of the press frame which gives it literally tons of pressure without the usual concerns of press frame deflection or misalignment. This is an expensive press, but one we feel is worth the money, especially for long magnum cartridges. Big Book Catalog, Issue:68, Page:536 Sinclair, Issue:5B, Page:059

SINCLAIR HEAVY DUTY LOADING BLOCK SINCLAIR INTERNATIONAL

reloading

Quick View
$13.99
  (2)
    • Check Price
      • SINCLAIR HEAVY DUTY LOADING BLOCK SINCLAIR INTERNATIONAL

      • These blocks are machined from solid white polyethylene providing the reloader with a very durable, easy to clean loading block. Each block is machined to fit the specific cases you reload and has finger grooves machined into the sides to provide a sure grip. Each hole has a slight chamfer for easy case head entry. The “Poly” blocks are dishwasher safe for easy cleaning. We use white polyethylene because spilled powder shows up easily. These 50 round blocks are 1" thick to provide deeper holes for your cases to sit in. This is especially beneficial when loading larger cases. See chart for the correct size. The #08-4275 block only has 32 holes due to the case head size. Sinclair, Issue:5B, Page:080

STALWART WOODEN LOADING BLOCKS SINCLAIR INTERNATIONAL

reloading

Quick View
$9.99
  (60)
    • Check Price
      • STALWART WOODEN LOADING BLOCKS SINCLAIR INTERNATIONAL

      • Reloaders who prefer a traditional hardwood block can use our wooden loading blocks which have the same machined fit as our “Poly” blocks. Each block is machined from select hardwood and has 50 holes (except for #LB-9, which has 32 holes). Finger grooves are machined into the sides for a sure grip. See chart for ordering information. Big Book Catalog, Issue:68, Page:537 Sinclair, Issue:5B, Page:080

HODGDON HS6 SMOKELESS POWDER HODGDON POWDER CO., INC.

reloading

Quick View
$23.99 - $169.99
  (81)
    • Check Price
      • HODGDON HS6 SMOKELESS POWDER HODGDON POWDER CO., INC.

      • A fine spherical propellant that has wide  application in pistol & shotshell In pistol, 9mm, 38 super, 40 S&W, & 10mm are some of the cartridges where HS-6 provides top performance In shotshell HS-6 yields excellent heavy field loadings in 10ga, 12ga, 20ga & even the  efficient & effective 28ga Hs-6 is truly an outstanding spherical propellant Identical to Winchesters discontinued 540  Big Book Catalog, Issue:68, Page:544 Sinclair, Issue:5B, Page:095

CFE223 SMOKELESS POWDER HODGDON POWDER CO., INC.

reloading

Quick View
$23.99 - $169.99
  (93)
    • Check Price
      • CFE223 SMOKELESS POWDER HODGDON POWDER CO., INC.

      • CFE 223 is a spherical powder containing “Copper Fouling Eraser,” an ingredient originally developed for military propellants to greatly reduce copper fouling in barrels. Your barrel will give you its best accuracy for longer periods between cleanings, so CFE 223 is great for Match, Varmint, and AR-15 competition shooters. It meters accurately to help yield consistent loads for top velocities in popular cartridges like 204 Ruger, 22-250, 223 Remington/5.56mm NATO, 6mm PPC, and 308 Winchester/7.62mm NATO. Brownells Christmas , Issue:5X, Page:019 Big Book Catalog, Issue:68, Page:544 Sinclair, Issue:5B, Page:095