Categories


ONE SHOT SPRAY CASE LUBE W/DYNA GLIDE PLUS HORNADY

reloading

Quick View
$9.99
 
    • View
      • ONE SHOT SPRAY CASE LUBE W/DYNA GLIDE PLUS HORNADY

      • Lube entire blocks of cases in one shot. Dries in minutes. One Shot is a non-petroleum product that will not contaminate powder or primers. Features: A high speed “micro penetrating”, high pressure dry film. Offers advantages in critical match loads accuracy. Eliminates the paste lubing mess. One Shot Case Lube is the most popular reloading cartridge and tool lubricant in the market, because; Case Lube is a dry film “Boundary” lubricant that is non-hazardous, does not contaminate powders or primers, and the “DynaGlide”™ technology exceeds US Military & NATO load carrying capacity requirements by 6 times. Precision shooters appreciate One Shot Case Lube’s clean, non-sticky, quick and easy application when loading large volumes of rounds at a time. The flexible all-purpose dry film lubricant use on their other reloading tools is a major bonus.

        1911, Issue:11, Page:068 Big Book Catalog, Issue:68, Page:537 Sinclair, Issue:5B, Page:072

RUN OUT RIG CONCENTRICITY GAUGE PRECISION REFLEX, INC.

reloading

Quick View
$169.99
 
    • View
      • RUN OUT RIG CONCENTRICITY GAUGE PRECISION REFLEX, INC.

      • Aligns Bullet & Case For More Round-To-Round Consistency & Tighter Groups Precision tool helps eliminate those unexplained flyers by showing the exact amount of bullet run out and allowing the user to gently tweak the bullet and case into correct alignment. Helps you improve round-to-round consistency for more consistent groups. By rotating the cartridge and using the lever adjuster to push on the side of the neck that reads “high” on the indicator, the cartridge can be adjusted until the dial shows no more run out. Versatile, too: works with everything from the 221 Fireball to the 50 BMG. May be set up for left or right-hand use.

        Sinclair, Issue:5B, Page:029

PISTOL BRASS LAPUA

reloading

Quick View
$31.99 - $289.99
 
    • View
      • PISTOL BRASS LAPUA

      • Many shooters have found Lapua brass to be considerably superior in quality to most other brass available. All Lapua cases are strong and uniformly precise. Lapua cases are manufactured to be reloaded, again and again, dozens of times. The base section is hard and strong, and the dimensions remain constant and will hold primers tight in the primer pocket even after repeated reloading. The brass body section is hard and firm. It is easy to extract after firing, whether full length sizing or only neck sizing. Strict tolerances in concentricity and wall thickness are used in manufacturing. The neck and shoulder are annealed to withstand repeated reloading. Packaged in a plastic case, 100 cases per package.

        Brownells Christmas , Issue:4X, Page:019 Big Book Catalog, Issue:68, Page:543 Mini-Catalogs, Issue:15, Page:020 Sinclair, Issue:5B, Page:120

EAGLE MAGNUM LEAD SHOT PSYCHE, LTD

reloading

Quick View
$42.99
  (5)
    • Check Price
      • EAGLE MAGNUM LEAD SHOT PSYCHE, LTD

      • Eagle lead shot contains 4.5-5% antimony for extra hardness to prevent deformation. Uniform size ensures tighter patterns downrange. Sold in 25 lb. bags. Big Book Catalog, Issue:68, Page:540 Sinclair, Issue:5B, Page:068

COMPETITION BUSHING NECK DIES REDDING

reloading

Quick View
$109.99 - $164.99
  (14)
    • Check Price
      • COMPETITION BUSHING NECK DIES REDDING

      • Similar in design concept to Reddings Competition Seating Die, the cartridge case is completely supported and aligned with the sizing bushing before the sizing process begins. As the sizing process starts, the cartridge case remains supported in the tightly chambered, sliding sleeve as it moves upward while the resizing bushing self-centers on the case neck. The decapping rod is maintained in precise alignment by using the internal parts of the die as a linear support much like that of a firing pin. Meanwhile, the micrometer adjustment of the bushing position delivers precise control to the desired amount of neck length to be sized. These dies were designed for use by Competition Shooters who have meticulously perared their cartridge cases and do not wish to use a sizing button, however, carbide size button kits are available separately. Bushings and shellholders sold separately Big Book Catalog, Issue:68, Page:534 Sinclair, Issue:5B, Page:036 Sinclair, Issue:5B, Page:038

LENGTH GAUGE HORNADY

reloading

Quick View
$32.99 - $39.99
  (1)
    • Check Price
      • LENGTH GAUGE HORNADY

      • The Hornady Lock-N-Load OAL Gauge (formerly Stoney Point) is an extremely easy to use tool. It only takes a couple of minutes to find the overall length for a particular bullet. The tool is threaded on one end to accept specially modified cartridge cases. Once threaded onto the tool, a bullet is inserted into the cartridge. The tool is then inserted into the chamber of your rifle. The push rod on the tool is used to push the bullet up against the rifling. The rod is then locked in place and the tool can be removed from the rifle. You then measure across the base of the cartridge and the top of the bullet with your dial calipers (use of a bullet comparator at this time is highly recommended) to obtain the OAL. If you want to check another type of bullet, insert the new bullet into the tool and repeat steps. There are two different models of OAL Gauge tools available. Straight is designed specifically for bolt-action rifles and single shot rifles. The Curved  model is designed for autoloaders and lever actions. Both models utilize the same modified cases. Either tool will work on the AR-15 type rifles. This tool is excellent for periodically checking the throat erosion of a rifle barrel. Great for checking out used rifles. There are over 60 different modified cases available to use with this tool. Big Book Catalog, Issue:68, Page:508 Big Book Catalog, Issue:68, Page:531 Mini-Catalogs, Issue:15, Page:018 Mini-Catalogs, Issue:15, Page:020 Sinclair, Issue:5B, Page:026

WFT 2 TRIMMER LITTLE CROW GUNWORKS, LLC.

reloading

Quick View
$26.99 - $71.99
  (9)
    • Check Price
      • WFT 2 TRIMMER LITTLE CROW GUNWORKS, LLC.

      • The WFT 2 is the next generation of WFT trimmers. The two main improvements are the ability to trim up to 45 caliber and interchange trim chambers. The WFT 2 has a half inch shaft and requires a half inch chuck to drive it. The feature most customers asked for was the ability to interchange trim chambers.  Instead of press fitting the trim chambers, like the original WFT, the trim chambers on the WFT 2 are a slight slip fit in bearing with a groove cut for an O-ring which creates a press fit. Changing out trim chambers is accomplished by removing the cutter and pushing out the trim chamber with the knock-out dowel that is provided. Installing the trim chamber is accomplished by setting the trim chamber on a flat surface and steadily pushing the housing onto the trim chamber. Setting the cutter depth is easily adjusted by placing a “master case” in the trim chamber and sliding the cutter up to the case mouth and tightening down the set screws. Trimming is just as precise and clean as with our original trimmer. The trim chamber selection on the WFT 2 is by specific cartridge, but still trims by case family-just order the largest chamber in the family that you intend to trim. This unit and its inserts do not chamfer or deburr the case moouth of the cartridge case as it is trimmed. If you can't find the cartridge you need, please contact our Special Order Department at 800-741-0015 Mini-Catalogs, Issue:15, Page:017 Sinclair, Issue:5B, Page:009

PISTOL DIE SETS RCBS

reloading

Quick View
$55.99 - $56.99
  (80)
    • Check Price
      • PISTOL DIE SETS RCBS

      • RCBS Carbide Pistol 3-Die Set includes a carbide sizer die which eliminates the need for case lubrication and cleaning of cases before use. Also includes an expander die for expanding and belling case mouths and a seater die with profile or taper crimp. 1911, Issue:11, Page:066 Brownells Christmas , Issue:5X, Page:012 Big Book Catalog, Issue:68, Page:533 Sinclair, Issue:5B, Page:054

WILSON STAINLESS NK DIES L.E. WILSON, INC.

reloading

Quick View
$56.99
  (31)
    • Check Price
      • WILSON STAINLESS NK DIES L.E. WILSON, INC.

      • These stainless steel neck dies from L.E. Wilson are the most accurate and easiest to use straight line dies on the market. These companion stainless steel neck dies are identical to standard Wilson neck dies except the body and decap pin are stainless. Neck dies accept Wilson, Redding, or our carbide bushing. These dies are beautifully made, accurate and will never rust or corrode. Be sure to order the Sinclair neck die base (APB) for arbor press use. Sinclair, Issue:5B, Page:049

SINCLAIR ARBOR PRESS SINCLAIR INTERNATIONAL

reloading

Quick View
$119.99
  (17)
    • Check Price
      • SINCLAIR ARBOR PRESS SINCLAIR INTERNATIONAL

      • Our Sinclair Arbor Press was designed specifically for use with hand dies, both in the field and on your workbench. It does not need to be clamped down for use. This arbor press features quality construction throughout and fits easily into your reloading box for trips to the range. Constructed with a solid stainless steel post and featuring a stainless steel rack and pinion design, our arbor press functions flawlessly with all neck sizing and bullet seating hand dies. Ratchet style height adjustment knob allows easy raising and lowering of the press head position. The Sinclair Press is also sold as part of a complete hand die reloading kit. This press is not intended for use with full length resizing dies. Sinclair, Issue:5B, Page:058

PACESETTER RIFLE DIE SETS LEE

reloading

Quick View
$31.99 - $35.99
  (25)
    • Check Price
      • PACESETTER RIFLE DIE SETS LEE

      • 3-Die Set includes Full Length Sizing Die, Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data Fits all 7/8"-14 reloading presses

BERGER VARMINT BULLETS BERGER BULLETS

reloading

Quick View
$27.99 - $259.99
  (39)
    • Check Price
      • BERGER VARMINT BULLETS BERGER BULLETS

      • The Berger Varmint bullet line includes those bullets that are most commonly used by precision oriented varmint hunters. These bullets are proven in the field to provide exceptional accuracy and a level of expansion that best suits a given varmint or predator application. The J4 Precision Jacket is thinner at the nose. These jackets are cut to size by a process known as pinch trimming. This pinch trim produces a bullet tip that is very thin and will expand quickly (impact velocity and animal size will effect expansion results). Berger Varmint bullets are made with the same materials and process as all Berger bullets. This produces a level of consistently that directly impacts a varmint hunter’s ability to get more hits in the field. Big Book Catalog, Issue:68, Page:541 Sinclair, Issue:5B, Page:102 Sinclair, Issue:5B, Page:103

RIFLE PRIMERS WINCHESTER

reloading

Quick View
$30.99 - $163.99
  (21)
    • Check Price
      • RIFLE PRIMERS WINCHESTER

      • Same Primers Used In Factory Ammo Help Ensure Reliable, Positive Ignition Of Reloads Winchester primers give instant, hot ignition and are easy to seat into primer pockets. Preferred by many hunters and competitors for their ability to maintain stability in temperature and humidity extremes. REMEMBER: There is a UPS Hazardous charge per package for powder or primers. Powder and primers may be shipped together in the same package. Powder, primers or ammunition may NOT be shipped out of the United States. 1911, Issue:11, Page:070 Brownells Christmas , Issue:5X, Page:012 Big Book Catalog, Issue:68, Page:545 Mini-Catalogs, Issue:15, Page:022 Sinclair, Issue:5B, Page:117

COMPETITION HANDGUN SEATER DIES REDDING

reloading

Quick View
$85.99
  (51)
    • Check Price
      • COMPETITION HANDGUN SEATER DIES REDDING

      • These seaters have a precision fitting bullet seating stem which is spring loaded. As the bullet and case move up into the seater positive alignment is insured. The micrometer adjustment on the seating stem simplifies setting and recording bullet seating depth. The micrometer is calibrated in .001 inch increments, is infinitely adjustable, and has a zero set feature. This seater has no crimping features. Crimping should be done with a separate Redding Profile Crimp or Taper Crimp die. The Competition seating die for the handgun and straight wall cases is compatible with most progressive reloading presses. Big Book Catalog, Issue:68, Page:535 Sinclair, Issue:5B, Page:042

RIFLE BENCHREST PRIMERS CCI

reloading

Quick View
$54.99 - $259.99
  (63)
    • Check Price
      • RIFLE BENCHREST PRIMERS CCI

      • In benchrest competition, there’s no such thing as a group that’s “too small.” Everything has to be tuned to the highest degree to produce match-winning results. That’s why CCI makes Benchrest primers. Only the most experienced skilled personnel put the priming mix in the cups, so you get the same flame, shot after shot. CCI also uses specially selected cups and anvils for added consistency. An independent researcher identified the use of CCI Benchrest primers as one of two factors that were the most significant contributors to tiny groups. We can’t add much to that! Incredibly consistent ignition power Selected metal parts Each primer marked with a “B” for quick identification Use the same data as CCI Standard (non-Magnum) primers   REMEMBER: There is a UPS Hazardous charge per package for powder or primers. Powder and primers may be shipped together in the same package. Powder, primers or ammunition may NOT be shipped out of the United States. Big Book Catalog, Issue:68, Page:545 Sinclair, Issue:5B, Page:117

PRO 4-20 LEAD MELTER LEE

reloading

Quick View
$69.99 - $73.99
  (67)
    • Check Price
      • PRO 4-20 LEAD MELTER LEE

      • Large diameter high capacity pot, holds approximately 20 pounds of lead. A generous 3 3/4" inches of clearance under the spout accepts all brands of bullet molds and most sinker molds. It also includes an adjustable mold guide to quickly and accurately position any mold for pouring. This second generation design incorporates the famous Lee patented high-efficiency design and dependable remote sensing thermostat, now in a dust tight housing. Long life 700-watt tubular heating element assures quick melting and rapid recovery. New micro adjustable, flow control valve adjusts instantly with a twist of the screw driver. Front mounted low maintenance replaceable valve spout allows instant reseating with a turn of a screwdriver. This melter will reach between 450 and 900 degrees Fahrenheit. Cast at the lowest temperature that will give good fill out. 650 degrees is a good starting point. Sinclair, Issue:5B, Page:089

LOAD-ALL II SHOTGUN PRESSES LEE

reloading

Quick View
$54.99
  (2)
    • Check Price
      • LOAD-ALL II SHOTGUN PRESSES LEE

      • Twenty-four shot and powder bushings are included free. Built-in primer catcher with an easy-to-empty door right up front Recesses at every station for speedy shell positioning Easy and economical gauge conversion Adjustable from the standard 2 3/4 shell, up to 3 inch shell Big Book Catalog, Issue:68, Page:536 Sinclair, Issue:5B, Page:066

WILSON PISTOL MAX CASE GAGES L.E. WILSON, INC.

reloading

Quick View
$22.99
  (89)
    • Check Price
      • WILSON PISTOL MAX CASE GAGES L.E. WILSON, INC.

      • The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Pistol Max Gages: Used to check all critical dimensions of the pistol case - mouth diameter, base diameter, rim thickness and diameter, case overall length and bullet diameter Brownells Christmas , Issue:4X, Page:019 Big Book Catalog, Issue:68, Page:532 Sinclair, Issue:5B, Page:035

MICRO-ADJUST BULLET SEATERS SINCLAIR/L.E. WILSON

reloading

Quick View
$169.99 - $199.99
  (84)
    • Check Price
      • MICRO-ADJUST BULLET SEATERS SINCLAIR/L.E. WILSON

      • We gathered our customers ideas and reloading experience with hand dies, and partnered with the experts who make them, to introduce the new Sinclair/L.E. Wilson Micro-Adjust Bullet Seater. It features easy-adjust seating depth capabilities with a simple turn of the die body. Sinclair/L.E. Wilson Micro-Adjust Bullet Seaters are detent-bearing driven with positive “click”  increments of .0005” for fast, accurate bullet seating depth adjustments. Here are the details of construction: Each seater stem is custom fitted to the seater body ensuring close tolerance fit Precision-cut threads allow bullet seating depth adjustment in .0005” increments Graduated scale for repeated use with different bullets and seating depths Micro-Adjust “clicks” via stainless springs and stainless ball bearings Constructed of 416 Stainless Steel with precise, laser-etched adjustment scale Made in the USA by L.E. Wilson with 85 years of inline die experience We feel these dies are the finest available in terms of quality, construction, and performance. Available in 12 popular cartridge offerings. Sinclair, Issue:5B, Page:051

BULLET PULLER COLLET RCBS

reloading

Quick View
$11.99 - $12.79
  (20)
    • Check Price
      • BULLET PULLER COLLET RCBS

      • This collet type bullet puller from RCBS will pull jacketed bullets from .17 caliber through 50 caliber with the appropriate collet (order collets separately from chart) installed in the puller body. Puller can be used in any 7/8-14 single stage reloading press. RCBS states that the collets do not damage jacketed bullets. Not for rimfire ammunition. Sinclair, Issue:5B, Page:021

SINCLAIR EXPANDER MANDREL - OVERSIZED SINCLAIR INTERNATIONAL

reloading

Quick View
$9.99
  (91)
    • Check Price
      • SINCLAIR EXPANDER MANDREL - OVERSIZED SINCLAIR INTERNATIONAL

      • Our neck turning tool mandrels are made from high grade stainless steel on Precision turning centers. The shape, finish, and size are the result of years of use and experimentation by many hand loaders. All of our mandrels fit both our NT-3000 and NT-1000 neck turning tools and most of our older model neck turning tools. Our neck turning tool mandrels measure approximately about .002"" less than the bullet diameter for the caliber. Our expander mandrels are made .001"" larger than the turning mandrels. Using an expander mandrel prior to neck turning sizes the case to fit the neck turning mandrels perfectly. This correct fit makes the turning process more precise and much easier. Any of the mandrels can be used to ""neck"" cases up to the next caliber when used with the NT-EXP (Expander Body). Sinclair, Issue:5B, Page:019

SST BULLETS HORNADY

reloading

Quick View
$30.99 - $40.99
  (91)
    • Check Price
      • SST BULLETS HORNADY

      • Hornady SST Bullets feature a streamlined profile for ultra-flat trajectories. Poymer tip allows for rapid expansion and maximum energy transfer. Match-grade jacket delivers surgical accuracy. Heavy construction with InterLock feature delivers deep penetration every time. Hornady 308 Cal 150gr SST is profile designed for the .300 Savage chamberings. Big Book Catalog, Issue:68, Page:540 Sinclair, Issue:5B, Page:010 Sinclair, Issue:5B, Page:108 Sinclair, Issue:5B, Page:109

SINCLAIR/STARRET CASE NECK MICROMETER SINCLAIR INTERNATIONAL

reloading

Quick View
$179.99
  (19)
    • Check Price
      • SINCLAIR/STARRET CASE NECK MICROMETER SINCLAIR INTERNATIONAL

      • The Sinclair Case Neck Micrometer is built around a Starrett micrometer head capable of measuring in .0001inch increments.This tool is designed specifically for handloaders to accurately measure case neck wall thickness. The micrometer head and anvil are completely adjustable so the handloader can measure the neck wall thickness right up to the junction of the case neck and shoulder. These adjusting features, plus the ratchet control built into the micrometer head, allow the user to zero the tool to suit their own feel and their own needs. The tool is mounted to a stainless steel base and allows the handloader to have both hands free to use when measuring brass. The micrometer head is mounted in an anodized aluminum frame, and the anvil is made of stainless steel. This micrometer will work for .17 caliber cases and larger. The tool comes pre-zeroed. MADE IN THE U.S.A. Sinclair, Issue:5B, Page:030

NECK SIZING DIES REDDING

reloading

Quick View
$33.79 - $119.99
  (95)
    • Check Price
      • NECK SIZING DIES REDDING

      • The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging. Big Book Catalog, Issue:68, Page:534 Sinclair, Issue:5B, Page:040 Sinclair, Issue:5B, Page:041

FULL LENGTH SIZING DIES FORSTER

reloading

Quick View
$36.99
  (28)
    • Check Price
      • FULL LENGTH SIZING DIES FORSTER

      • Forster Reloading Dies are of excellent quality and provide the reloader with the ability to produce concentric rounds time and time again. Each die is manufactured from the finest quality steel carefully machined to very tight tolerances. Dies are hand polished both before and after the heat-treating process to guarantee an extra fine finish. All Forster reloading dies feature their Forster Cross Bolt Die Locking Ring that tightens the two ends of the split ring instead of tightening a screw directly into the threads of the die. Forster Full Length Sizing Dies are each equipped with their E-Z Out Expander button which helps keep case necks concentric during the neck expanding operation. It's positioned higher in the neck area than most other dies. This provides support and holds the axis of the neck and case in alignment while the case is withdrawn from the die. NATIONAL MATCH DIES reduce headspace by .003" and are intended for bolt action target rifles only. Big Book Catalog, Issue:68, Page:533 Sinclair, Issue:5B, Page:047

CASE PREP XPRESS LYMAN

reloading

Quick View
$2.99 - $135.99
  (11)
    • Check Price
      • CASE PREP XPRESS LYMAN

      • One-Stop Machine Helps You Quickly Perform Brass Prep All-in-one power tool includes the most popular case preparation accessories in one unit driven by a single high-torque, low-RPM motor ideally suited to case prep work. Nothing else to buy to get started! Quick, easy cleanup, too - just brush all the brass chips into the removable collection pan. Includes attachments to perform these case prep operations: deburr case neck inside (VLD) and outside; clean/lubricate case neck; clean/uniform primer pocket and ream out primer crimp on military brass (includes attachments for both large and small pockets). Comes with case neck brushes in .25, .30, .38 and .45 calibers, plus Mica case neck lube and a handy clean-up brush. 1911, Issue:11, Page:065 Brownells Christmas , Issue:4X, Page:018 Big Book Catalog, Issue:68, Page:529 Mini-Catalogs, Issue:15, Page:016 Mini-Catalogs, Issue:15, Page:017 Sinclair, Issue:5B, Page:008

PLATED PISTOL BULLETS FRONTIER BULLETS

reloading

Quick View
$59.99 - $93.99
  (70)
    • Check Price
      • PLATED PISTOL BULLETS FRONTIER BULLETS

      • The Complete Metal Jacket range from Frontier Bullets is one to look out for if you are shooting any caliber of handgun. CMJ Bullets are world renowned for their superb performance, accuracy and consistency. Frontier Metal Processing manufacture CMJ Restrike bullets since 1996, and has over the years perfected the process to a product that is used by top shooters around the world. The consistency and accuracy of CMJ Bullets comes courtesy of the design. Lead Antimony alloy is used to ensure a hardened core, and each bullet is then swaged. After swaging, the bullets are sent to the plating plant where a complete coating of pure copper is added via electroplating. The Lead core is now completely plated in copper, protecting the shooter from any and all contact with lead, and as a final measure of perfection, each bullet is restruck to ensure each bullet is formed exactly like the other. Restriking involves forcing the complete bullet into a “shaping die” to reform the bullet into the designed shape to remove any imperfections that may have formed during production and plating. CMJ handgun bullets for reloading are treated in the same way as FMJ bullets. With a few basic precautions such as avoiding over-crimping, the bullets can be shot at normal and high velocities without problem and with excellent accuracy.