Categories


CASE TRIMMER PILOT RCBS

reloading

Quick View
$5.49
 
    • View
      • CASE TRIMMER PILOT RCBS

      • Designed with a small taper to help guide the pilot into the case mouth. Sold Seperately Rotary Case Trimmer Collets, Trim Pro Manual Case Trimmer and Trim Pro-2 Power Case Trimmer.

        Big Book Catalog, Issue:68, Page:530 Sinclair, Issue:5B, Page:015

SINCLAIR CASEHOLDER DRIVER SINCLAIR INTERNATIONAL

reloading

Quick View
$13.99
 
    • View
      • SINCLAIR CASEHOLDER DRIVER SINCLAIR INTERNATIONAL

      • The Sinclair Driver and Caseholder system is designed to hold and turn your case while you are neck turning,cleaning case necks or case mouth deburring. The Caseholders and Driver are machined from stainless steel, and the driver has a one fourth hex shaft for use in power screwdrivers or low-speed drill motors. The driver is universal to the Sinclair system and will work with all the Caseholders. Our universal Caseholder enables you to use this system for any cartridge case which has a Lee Auto Prime sheelholder available for it. The Universal Caseholder works with the same #05-2500 drivers as our original caseholders, and it is available as a kit with the Driver and Universal caseholder or individually for those who already have a driver. Remember to order a Lee Auto Prime shellholder for your Universal Caseholder if you don't already have one. The Sinclair Driver and Caseholder system and a Sinclair Neck Turning Tool takes the hard work out of neck turning using either the Sinclair Power center or a power screwdriver. Holding the neck tuner in one hand and power screwdriver in the other negates the wobble in drive assembly of the screwdriver. This system is a great, inexpensive way to speed up the neck turning process. Also works great for many other case prep operations. Sinclair, Issue:5B, Page:008 Sinclair, Issue:5B, Page:020

WILSON/SINCLAIR HAND DIE KIT WITH STANDARD BULLET SEATER SINCLAIR/L.E. WILSON

reloading

Quick View
$219.99
 
    • View
      • WILSON/SINCLAIR HAND DIE KIT WITH STANDARD BULLET SEATER SINCLAIR/L.E. WILSON

      • Our Sinclair/Wilson Hand Die Kit is the best buy for the money if you begin reloading with hand dies. This ultra-compact reloading set-up enables the user to reload for extreme accuracy as well as being mobile for competition use or load development at the range. The Sinclair/Wilson Hand Die Kit includes a Wilson Neck Die, Wilson Straight Line Bullet Seater, Sinclair Arbor Press, and Sinclair Arbor Press Base. Wilson Neck Die Bushings will need to be ordered separately.

        Sinclair, Issue:5B, Page:051

SIERRA PISTOL BULLETS SIERRA BULLETS, INC.

reloading

Quick View
$16.49 - $31.99
  (52)
    • Check Price
      • SIERRA PISTOL BULLETS SIERRA BULLETS, INC.

      • Sports Master® handgun bullets are engineered to provide consistent, reliable expansion over a wide range of velocities. Sierra has added a serrated "Power Jacket" on hollow cavity and hollow point bullets. On impact, the "Power Jacket" expands uniformly along the serration lines for consistent weight retention and maximum energy transfer. 1911, Issue:11, Page:070 Brownells Christmas , Issue:5X, Page:012 Big Book Catalog, Issue:68, Page:542 Sinclair, Issue:5B, Page:101

4 DIE - DELUXE PISTOL DIE SET LEE

reloading

Quick View
$37.99 - $43.99
  (66)
    • Check Price
      • 4 DIE - DELUXE PISTOL DIE SET LEE

      • Set includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Carbide Factory Crimp Die, Shell Holder, Powder Dipper and Instructions/Load Data Carbide Factory Crimp Die allows you to separate the bullet seating from the crimping operation - It makes setup much easier and the die has the added feature of a carbide resizer that does a finish sizing pass on the completed round 50 Beowolf contains a STEEL sizing die and STEEL taper crimp die NOT a factory crimp die. 1911, Issue:11, Page:067

SHELLHOLDERS RCBS

reloading

Quick View
$7.99
  (32)
    • Check Price
      • SHELLHOLDERS RCBS

      • View RCBS Shellholder Chart. Sinclair, Issue:5B, Page:022

SIERRA LONG RANGE AND SPECIALTY BULLETS SIERRA BULLETS, INC.

reloading

Quick View
$132.99 - $329.99
  (96)
    • Check Price
      • SIERRA LONG RANGE AND SPECIALTY BULLETS SIERRA BULLETS, INC.

      • These bullets are designed for the competitive shooter. Brownells Christmas , Issue:4X, Page:018 Big Book Catalog, Issue:68, Page:542 Mini-Catalogs, Issue:15, Page:021 Sinclair, Issue:5B, Page:101

ALUMINUM POWDER FUNNELS SATERN

reloading

Quick View
$12.49 - $19.99
  (38)
    • Check Price
      • ALUMINUM POWDER FUNNELS SATERN

      • Aluminum Powder Funnel Big Book Catalog, Issue:68, Page:538 Sinclair, Issue:5B, Page:085

GEN6 COMPACT TOUCH SCREEN POWDER SYSTEM LYMAN

reloading

Quick View
$239.99
  (19)
    • Check Price
      • GEN6 COMPACT TOUCH SCREEN POWDER SYSTEM LYMAN

      • The compact Gen6 design takes a minimum of bench space and offers unrestricted pan and touch screen access for both right and left hand users. Accurate to one tenth grain, the Gen6 dispenses all types of smokeless powder at two grains per second. In addition, it features an auto repeat function that drops a precise charge each time the pan is reset. Based on totally digital technology that overcomes problems commonly experienced by older designs, the system is packed with additional state of the art improvements like fast, 3 minute warmup, anti-static and anti-drift technology and has sophisticated electronic shielding to resist interference from other electronic devices like cell phones, etc. Touch-Screen Controls Compact Size - Uses 50% Less Bench Space Auto Repeat Function Drops Charges Each Time the Pan is Reset Quick-Drain to Change Powders Electronic Interference Shield Resists Interference from Cell Phones, etc Anti-Static/Anti-Drift Technology Fast Operation - Dispenses 2 Grains per Second Accurate to 1/10 grain Handles all types of Smokeless Powders Not for use with black powder. 1911, Issue:11, Page:068 Brownells Christmas , Issue:3X, Page:014 Big Book Catalog, Issue:68, Page:538 Sinclair, Issue:5B, Page:088

BIG BOSS II RELOADING PRESS REDDING

reloading

Quick View
$199.99
  (68)
    • Check Price
      • BIG BOSS II RELOADING PRESS REDDING

      • Heavy Duty Press Handles Any Cartridge Up To The Largest Magnums Heavy-duty cast iron single-stage press features the largest frame opening and useable ram stroke of any press in its class. Handles all your reloading needs from small handgun cases to the big rifle magnums. The 36° offset O-frame with a generous 4½" high opening offers superb ease of access. Offset ball handle for super-smooth operation and maximum leverage. The steel bushing for 7⁄8"-14 dies can be replaced with a bushing for 1"-14 dies (available separately). To use 1¼"-12 dies, simply remove the bushing entirely. Features the same Spent Primer Collection System used on Redding’s T-7 Turret and UltraMag presses. Spent primers automatically drop through the 1" diameter heavy ram and down into a flexible plastic tube that holds hundreds of primers for easy disposal. 1911, Issue:11, Page:068 Brownells Christmas , Issue:2X, Page:014 Big Book Catalog, Issue:68, Page:536 Sinclair, Issue:5B, Page:059

PREMIUM DELUXE DIE SETS REDDING

reloading

Quick View
$124.99
  (79)
    • Check Price
      • PREMIUM DELUXE DIE SETS REDDING

      • The Redding Premium Deluxe rifle die sets are an upgraded die set for reloaders looking for added precision. The upgrades include a Carbide Size button in the full length sizing die, making resizing smooth and effortless. The set also comes with Redding’s Bullet Seating Micrometer on the seating dies, allowing for incremental adjustment of the bullet seating depth. This dies set includes a Full Length sizing die with Carbide sizing button, Bullet Micrometer Seating Die, and standard Neck Sizing Die.

ULTRASONIC CASE CLEANER RCBS

reloading

Quick View
$18.99 - $141.99
  (59)
    • Check Price
      • ULTRASONIC CASE CLEANER RCBS

      • The RCBS Ultrasonic Case Cleaner is great for the reloader that wants to get his brass perfectly clean, inside and out. This ultrasonic cleaner features a large 3 liter capacity, 60 watt transducer, 100 watt ceramic heater, drain valve, drain tube and a user friendly keypad. Ultrasonic cleaning has become very popular with reloaders as it blasts away caked on carbon, dirt and grime from brass cases inside and out, even in the primer pocket! The RCBS Ultrasonic Solutions come in a 32oz bottle of concentrate that will make up to 10 gallons of solution and can be used in any ultrasonic case cleaner. Big Book Catalog, Issue:68, Page:540 Sinclair, Issue:5B, Page:076

3BR MATCH-GRADE POWDER MEASURE REDDING

reloading

Quick View
$49.99 - $169.99
  (93)
    • Check Price
      • 3BR MATCH-GRADE POWDER MEASURE REDDING

      • The Match-Grade Model 3BR was created to be the ultimate powder measure... "out of the box" match ready! Since its creation this powder measure has been helping Silhouette shooters and Benchrest Shooters win matches and set new records. It all started witht he time proven accuracy and reliability of the original Model 3 Powder Measure. The Model 3BR Powder Measure utilizes all of the features of the original Model 3 and to that Redding added the conversion features that Benchrest shooters were looking for. It quickly became their most popular powder measure for two very good reasons... Its broad range of charging cpacity and its performance record. Additional Metering Chambers are availiable. Hangun Metering Chamber has a charge range of 0 to 10 grains. Rifle or Universal Metering CHamber has a charge range of 5 to 100 grains. 1911, Issue:11, Page:068 Big Book Catalog, Issue:68, Page:538 Sinclair, Issue:5B, Page:083

WILSON STAINLESS SEATERS L.E. WILSON, INC.

reloading

Quick View
$99.99
  (90)
    • Check Price
      • WILSON STAINLESS SEATERS L.E. WILSON, INC.

      • These stainless steel seaters from L.E. Wilson have a built-in micrometer seating depth adjustment feature with an easy to read scale in .001" graduations. Sinclair, Issue:5B, Page:050

MASTER HUNTER DIE SETS REDDING

reloading

Quick View
$131.99
  (19)
    • Check Price
      • MASTER HUNTER DIE SETS REDDING

      • The Master Hunter series combines Redding’s proven Competition Seating Die with a full-length sizing die that lets the hunter load exceptionally consistent ammo to minimize risk of a stuck case or failure to feed that can hinder taking a follow up shot. Full-length sizing also enables use of any SAAMI-standard brand of case without having to resort to bushing sizer die. The result is precise bullet/case neck alignment and finely-tuned bullet seating that lets hunters achieve the utmost performance from their favorite loads. Sinclair, Issue:5B, Page:043

BODY DIES REDDING

reloading

Quick View
$29.49 - $84.99
  (76)
    • Check Price
      • BODY DIES REDDING

      • Body Dies are designed to full length resize the case body, bump the shoulder position for proper chambering, but not size the neck at all. They are made without internal parts and are intended for resizing cases which have become increasingly difficult to chamber after repeated firing. After using a body die, the case should be run through the neck die to achieve proper neck tension. Sold separately or as part of a set. Big Book Catalog, Issue:68, Page:534 Sinclair, Issue:5B, Page:036 Sinclair, Issue:5B, Page:038

LOCK-N-LOAD MODIFIED CASES HORNADY

reloading

Quick View
$5.49 - $16.99
  (81)
    • Check Price
      • LOCK-N-LOAD MODIFIED CASES HORNADY

      • There are over 60 different modified cases available to use with Hornady Lock-N-Load Gauge. Hornady will make custom cartridges for those not listed. Details are available in the instructions. Modified cases will not work in tight neck chambers, except for the CFG-6PPCT. Big Book Catalog, Issue:68, Page:508 Big Book Catalog, Issue:68, Page:531 New Product Supplement, Issue:571, Page:007 Sinclair, Issue:5B, Page:026

PREMIUM GOLD MEDAL PISTOL PRIMERS FEDERAL

reloading

Quick View
$36.99 - $189.99
  (29)
    • Check Price
      • PREMIUM GOLD MEDAL PISTOL PRIMERS FEDERAL

      • Gold Medal® Primers are manufactured to exacting tolerances, so if you load your own you know you're getting the same high-quality primer components and optimum ignition that make our Gold Medal cartridges the choice of match shooters everywhere. Knowing this will give you the extra confidence you need. Big Book Catalog, Issue:68, Page:545 Sinclair, Issue:5B, Page:117

SIERRA PRO-HUNTER BULLETS SIERRA BULLETS, INC.

reloading

Quick View
$17.99 - $32.49
  (4)
    • Check Price
      • SIERRA PRO-HUNTER BULLETS SIERRA BULLETS, INC.

      • Sierra Pro-Hunter Bullets use individual photos for web. Copy: The traditional, flat base design of the Pro-Hunter® has been skillfully blended with Sierra's world-famous accuracy. Our custom-tapered Pro-Hunter® jacket design helps assure maximum expansion, optimum weight retention and deep penetration for game-stopping, one-shot performance. Big Book Catalog, Issue:68, Page:542 Sinclair, Issue:5B, Page:100

76 STYLE TITANIUM NITRIDE BUSHING - .185 TO .252 REDDING

reloading

Quick View
$27.29 - $27.49
  (75)
    • Check Price
      • 76 STYLE TITANIUM NITRIDE BUSHING - .185 TO .252 REDDING

      • Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .253 to .305 .306 to .368 Determining Redding Bushing Size The proper bushing size can be easily determined by measuring the outside neck diameter of your loaded cartridges with a precision micrometer or a dial caliper. Then, simply subtract .001" from the cartridge that had the smallest average neck diameter. This diameter bushing will generally size case necks just enough to create the proper press fit for the bullet. If you are using a Type “S” style die and not turning the outside of your case necks, we suggest using a bushing .002" smaller than your smallest average neck diameter, and using the expander ball included with your Type “S” die. This size bushing will still give you minimal sizing (maximizing the life of your brass) and the expander ball will insure that each cartridge has the same bullet grip. Redding has found that when you have cases with neck wall thicknesses on the thin side of the SAAMI tolerance, your fired case will measure considerably larger (.006" to .010" larger) than your loaded rounds. In these circumstances, Redding’s tests have shown that a bushing .001" larger (than the loaded round) may give you the desired bullet grip. Sinclair, Issue:1B, Page:043

Sinclair Meplat Trimmers SINCLAIR INTERNATIONAL

reloading

Quick View
$13.99 - $49.99
  (98)
    • Check Price
      • Sinclair Meplat Trimmers SINCLAIR INTERNATIONAL

      • The Sinclair Meplat Trimmer is a handcranked tool which will quickly and accurately uniform the bullet tips (meplats) of long range bullets or loaded ammunition. This tool includes a caliber specific Delrin™ housing, tool steel cutter, aluminum frame and a comfortable crank handle. Additional Delrin™ housings (see chart below) may be purchased to change calibers. We suggest trimming approximately .005" of material from the bullet tips which will uniform the ballistic coefficient (B.C.) with a B.C. reduction of about 2%. The Meplat Trimmer is easy to set up and adjust to the trim cut you desire. We also suggest sorting long range match bullets by base to give length using our Sinclair Bullet Sorting Stand or our comparators prior to trimming meplats. Sinclair, Issue:5B, Page:006

BREECH LOCK CHALLENGER KIT LEE

reloading

Quick View
$130.99
  (31)
    • Check Price
      • BREECH LOCK CHALLENGER KIT LEE

      • Contains Breech Lock Challenger Press and one Breech Lock quick-change bushing, Perfect Powder Measure, Lee Safety Scale, Powder Funnel, cutter and lock stud, chamfer tool, sizing lube, primer pocket-cleaning tool, Auto-Prime XR and a set of Auto-Prime Shell Holders Popular "O" frame design w/ a 4 1/2" opening Featuring the Breech Lock quick change die system Spent primer tube is effective and easy to empty *Standard 7/8"-14 Threaded Dies Made from Solid Aluminum 1911, Issue:11, Page:067 Big Book Catalog, Issue:68, Page:536 Sinclair, Issue:5B, Page:066

73 STYLE STEEL BUSHING - .306 TO .368 REDDING

reloading

Quick View
$16.49
  (24)
    • Check Price
      • 73 STYLE STEEL BUSHING - .306 TO .368 REDDING

      • Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" Determining Redding Bushing Size The proper bushing size can be easily determined by measuring the outside neck diameter of your loaded cartridges with a precision micrometer or a dial caliper. Then, simply subtract .001" from the cartridge that had the smallest average neck diameter. This diameter bushing will generally size case necks just enough to create the proper press fit for the bullet. If you are using a Type “S” style die and not turning the outside of your case necks, we suggest using a bushing .002" smaller than your smallest average neck diameter, and using the expander ball included with your Type “S” die. This size bushing will still give you minimal sizing (maximizing the life of your brass) and the expander ball will insure that each cartridge has the same bullet grip. Redding has found that when you have cases with neck wall thicknesses on the thin side of the SAAMI tolerance, your fired case will measure considerably larger (.006" to .010" larger) than your loaded rounds. In these circumstances, Redding’s tests have shown that a bushing .001" larger (than the loaded round) may give you the desired bullet grip. Sinclair, Issue:1B, Page:043

INTERLOCK BULLETS HORNADY

reloading

Quick View
$22.99 - $51.99
  (58)
    • Check Price
      • INTERLOCK BULLETS HORNADY

      • Hornady InterLock Bullets feature an aerodynamic secant ogive, delivering flat trajectories and great accuracy. Tapered jacket for deep penetration and controlled expansion. InterLock ring locks core and jacket together. Lead alloy core is tough enough for any game. Big Book Catalog, Issue:67, Page:524 Sinclair, Issue:5B, Page:108 Sinclair, Issue:5B, Page:109

HIGH-VOLUME PISTOL BULLETS HORNADY

reloading

Quick View
$58.99 - $99.99
  (83)
    • Check Price
      • HIGH-VOLUME PISTOL BULLETS HORNADY

      • Hornady bulk pistol bullets are great for target practice and plinking. These bullets feature a copper jacket with a lead core. Available in popular calibers for high volume shooters. You know the old adage "Practice makes perfect", well you'll be a pro in no time with these inexpensive bulk bullets. 1911, Issue:11, Page:070 Sinclair, Issue:5B, Page:110

TRIM-IT II CASE TRIMMER ACT COLEMAN

reloading

Quick View
$19.99 - $129.99
  (67)
    • Check Price
      • TRIM-IT II CASE TRIMMER ACT COLEMAN

      • The TRIM-IT II mounts to any standard drill or drill press, making your case trimming faster and a whole lot easier. The adjustable 3-way cutter features a 3-sided carbide blade that allows you to trim, chamfer, and de-burr virtually any caliber of rifle or pistol brass. It features a built-in micrometer that allows for supremely accurate cut-length control and quick adjustability. The TRIM-IT II is not caliber specific, interchangeable dies are available but sold separately.

NOSLER PARTITION BULLETS NOSLER, INC.

reloading

Quick View
$25.99 - $86.99
  (41)
    • Check Price
      • NOSLER PARTITION BULLETS NOSLER, INC.

      • The Nosler Partition is favored the world over its superior expansion, accuracy and game taking ability in any caliber, on any game and in any situation. Its unique dual core is tough enough to withstand the violent impact of high velocity at close range, but still expand reliably at extreme range. 50 count box. Sinclair, Issue:5B, Page:104