Categories


AK-47 MULTI-RAIL FOREND ULTIMAK

policestore

Quick View
$229.99
 
    • View
      • AK-47 MULTI-RAIL FOREND ULTIMAK

      • Mount Picatinny Accessories For Mission-Specific NeedsHard-anodized, MIL-STD aluminum Rail Forend has MIL-STD 1913 Picatinny rails at 3, 6, and 9 o’clock for mounting lights, lasers, and other accessories. Expanding rear tenon system self-squares and self-centers inside the receiver and has a dual, floating steel clamp system that locks the forend to the barrel, without applying forces to the barrel. Leaves room for bayonet on gas block mounted lugs. Fits over the outside of the factory forend cap on stamped, standard length receivers, including Chinese manufactured AK-47s. Tools and instructions included.

1911 AUTO SIMONICH GUNNER GRIPS STRIDER KNIVES, INC

policestore

Quick View
$59.99
 
    • View
      • 1911 AUTO SIMONICH GUNNER GRIPS STRIDER KNIVES, INC

      • Superior Weapon Retention In Extreme ConditionsWill not fail, even under the worst weather conditions.Superior impact-resistance, low moisture-absorption properties, and dimensional stability over a wide temperature range.Retain control of pistol in the most extreme tactical or duty situations, even when grip is wet or oily.Matched to the exact colors used by the U.S. armed forces.Made in the U.S.A.

BROWNING HI-POWER TRITIUM NIGHT FRONT SIGHT MEPROLIGHT

policestore

Quick View
$39.75
 
    • View
      • BROWNING HI-POWER TRITIUM NIGHT FRONT SIGHT MEPROLIGHT

      • Single, front sights only. Replace damaged units or stake-on models after refinishing.

AR-15 LOWER RECEIVER PARTS KIT DPMS

policestore

Quick View
$62.99
  (87)
    • Check Price
      • AR-15 LOWER RECEIVER PARTS KIT DPMS

      • Mil-Spec AR-15 Sub-Assembly PartsMuch lower in total cost than buying the parts one at a time.Kit includes: trigger, trigger spring, trigger pin, hammer, hammer spring, hammer pin, disconnector and spring, bolt catch, b/c plunger, b/c spring, b/c roll pin, selector, selector detent, selector detent spring, (2) takedown detents and springs, pivot pin, rear takedown pin, buffer retainer and spring, magazine catch, button and spring, A2 pistol grip, screw and washer.

BOLT/CARRIER ASSEMBLY HIGH STANDARD

policestore

Quick View
$169.99
  (10)
    • Check Price
      • BOLT/CARRIER ASSEMBLY HIGH STANDARD

      • Restore Service Rifles To Factory Specs Or Build NewReplace worn or damaged parts on service rifles or build a custom rifle with high-quality, Mil-Spec parts.Save time & moneyno need to hunt down each item.

AR-15/M16 5.56 HAMMER FORGED CARBINE BARREL SPIKES TACTICAL

policestore

Quick View
$279.99
  (47)
    • Check Price
      • AR-15/M16 5.56 HAMMER FORGED CARBINE BARREL SPIKES TACTICAL

      • Weight-Saving Profile For Enhanced Maneuverability; Mid-Length Gas Sytem For Added Reliability These carbine barrels are hammer forged for Spike’s by FN, and are chrome lined and finished to M-249 specs for durability. Magnetic particle inspected (MPI) and high pressure tested (HPT) to ensure superb quality. Both models drilled for a mid-length gas system for extra reliability, with a slimmed-down profile between the barrel extension and gas port to save weight. Barrel extension has M4 feed ramp cuts. 16" is slimmer at muzzle than standard carbine barrel. 14½" Optimum provides even more weight savings and minimum length for fast deployment and quick maneuverability. All NFA rules apply.

AR-15 5.56 CHROME BOLT CARRIER GROUP DANIEL DEFENSE

policestore

Quick View
$205.00
  (17)
    • Check Price
      • AR-15 5.56 CHROME BOLT CARRIER GROUP DANIEL DEFENSE

      • Complete, mil-spec assembly with bolt, bolt carrier, and firing pin ready to drop into the rifle or carbine upper of your choice. Features a shot-peened bolt for increased surface strength and durability. Each assembly is magnetic particle inspection tested to ensure it’s free from imperfections that can lead to premature failures. Properly staked gas key prevents gas leakage that can lead to short stroking. Chrome Bolt Carrier Group features a Semi-Auto Bolt Carrier. Carrier is chrome lined for smooth cycling and resistance to wear from hot combustion gases for years of dependable service. Available in .223/5.56mm.

URBINO TACTICAL SHOTGUN BUTTSTOCKS MESA TACTICAL PRODUCTS, INC.

policestore

Quick View
$144.99 - $157.99
  (11)
    • Check Price
      • URBINO TACTICAL SHOTGUN BUTTSTOCKS MESA TACTICAL PRODUCTS, INC.

      • Improves Comfort & Maneuverability With Body Armor Pistol grip stock of rugged, fiberglass-reinforced nylon polymer has a short 12½" (31.7cm) length of pull that makes it easy to shoulder and maneuver when you’re wearing body armor. The removable, five-position cheek riser helps you position your head for best alignment with an optic while maintaining a solid cheekweld. Pistol grip has ample contact surface with deep horizontal grooves for a secure grasp and excellent weapon control. Shock-absorbing padding on the backstrap helps protect your hand from recoil, while the Limbsaver® recoil pad helps reduce felt recoil. Includes a 1¼" slot rear sling loop, plus a stud on the underside for a QD sling swivel. Models available for the Remington 870, Mossberg 930 and Benelli M1014.   Follow Benelli Factory removal instructions for stock removal.

PHANTOM 5C2 COMP/FLASH HIDER YANKEE HILL MACHINE CO., INC.

policestore

Quick View
$28.50 - $44.60
  (86)
    • Check Price
      • PHANTOM 5C2 COMP/FLASH HIDER YANKEE HILL MACHINE CO., INC.

      • Tames Muzzle Rise Dedicated Comp/Flash Hider Combo.Aggressive Front End Cuts For CQB Maneuvers.Hides flash and tames muzzle rise.Helps eliminate dust signature when shooting in the prone position.For threaded barrels only, includes crush washer. .223 model has grooved base rings that accept training attachments and sound suppression devices for LE and military personnel.Chisel-shaped front notches keep muzzle planted on your attacker during CQB situations.

AR-15 FIRING PIN DPMS

policestore

Quick View
$7.99
  (66)
    • Check Price
      • AR-15 FIRING PIN DPMS

      • OEM Quality Replacement Firing PinReplace worn or damaged pins.Small collar fits all carriers.

AR-15/M16 RANGER FLOORPLATE FOR PMAG MAGPUL

policestore

Quick View
$14.20
  (44)
    • Check Price
      • AR-15/M16 RANGER FLOORPLATE FOR PMAG MAGPUL

      • Fast, Easy Mag Changes In High Stress Situations Get fast, secure tactical magazine changes for both 20 & 30 round PMAGS. Helps you hold on to empty magazine after a tactical reload. Includes molded-in para-cord hole for custom loop configurations. Easy, drop-in installation: remove the PMAG’s factory floorplate as you do for cleaning, and replace it with the Ranger Floorplate. Will NOT fit the new PMAG GEN M3 magazines or the 7.62x51 PMAGS

AR-15/M16™ NiB-X COATED UPPER RECEIVER WMD GUNS

policestore

Quick View
$142.99
  (43)
    • Check Price
      • AR-15/M16™ NiB-X COATED UPPER RECEIVER WMD GUNS

      • Ultra-Hard, Smooth-As-Glass Finish For Maximum Durability & Smooth Cycling Stripped receiver has WMD’s NiB-X nickel boron coating inside and out to provide an exceptionally tough, ultra-smooth surface finish for outstanding wear resistance and lubricity. A ceramic topcoat is applied for color on the exterior only, leaving the nickel boron exposed inside to keep friction with the bolt carrier to the absolute minimum. Works great with standard carriers, too, but even smoother with nickel boron coated bolt carriers, including WMD’s NiB-X coated carrier, available separately. M4 feed ramps ensure reliable feeding.

AR-15/M16 FOLDING BATTLE REAR SIGHTS TROY INDUSTRIES, INC.

policestore

Quick View
$129.99
  (23)
    • Check Price
      • AR-15/M16 FOLDING BATTLE REAR SIGHTS TROY INDUSTRIES, INC.

      • Reliable, No-Snag, Folding Backup Sights; Deployed Height Same As Factory SightsFailsafe backup when your primary optic or red dot failsSpring-loaded sight post flips up easily and stays deployed until you hit the retract buttonLocks down securely and only " high when retractedSpring pressure and locking detent ballsApertures/posts are same height as factory sights, simplifying integration of sights on your rifleNo knobs or levers to catch on brush, clothing, or other equipmentSimple installation using a standard flathead screwdriverRear BattleSight has dual close- and long-range same-plane apertures; windage adjustable in MOA increments

AR-15 SHORT THROW SELECTOR NOVESKE RIFLEWORKS LLC

policestore

Quick View
$37.95 - $39.95
  (18)
    • Check Price
      • AR-15 SHORT THROW SELECTOR NOVESKE RIFLEWORKS LLC

      • 60/ Selector With Magpul SSG Levers Noveske’s STS (Short Throw Selector) gives your AR’s selector a short 60° throw for fast, easy transition between the “Fire” and “Safe” positions. It uses Magpul’s popular SSG selector lever (included) for the FN SCAR for enhanced ergonomic feel, and is available in both standard right-hand and ambidextrous versions. For further versatility, the Noveske kit includes both long and short levers to help you get the best feel and function. The central shaft is machined from hardened stainless steel with a nitride coating for surface wear resistance.

TRIGGER CONNECTOR FOR GLOCK® GHOST

policestore

Quick View
$22.99
  (83)
    • Check Price
      • TRIGGER CONNECTOR FOR GLOCK® GHOST

      • Improves Accuracy With Lighter Trigger FeelEliminates accuracy-robbing overtravel.Reduces the length of trigger pull & improves reset.Requires minor fitting.Ghost and Ghost Rocket connectors reduce trigger weight to 3.5lbs.Made in the U.S.A. “GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.  Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.  The use of Glock on this page is merely to advertise the sale of Glock parts or components.  As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.

ENHANCED SLIDE STOP for GLOCK® TANGODOWN

policestore

Quick View
$19.99
  (79)
    • Check Price
      • ENHANCED SLIDE STOP for GLOCK® TANGODOWN

      • Optimum Shape To Ensure Positive Thumb Contact Redesigned thumb pad places the pad slightly forward of the factory position, so your thumb gets to it quicker and returns the pistol to battery faster. Pad is shaped to aid in positive contact to help prevent accidental slide stop engagement, even when you’re wearing gloves. Stamped and formed from durable 4130 steel, then treated with a special hardcoat finish that resists rust and wear. “GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.  Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.  The use of Glock on this page is merely to advertise the sale of Glock parts or components.  As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.

AR-15/M16 GEN 2 T-SERIES FREE FLOAT HANDGUARDS MIDWEST INDUSTRIES, INC.

policestore

Quick View
$149.95 - $209.95
  (55)
    • Check Price
      • AR-15/M16 GEN 2 T-SERIES FREE FLOAT HANDGUARDS MIDWEST INDUSTRIES, INC.

      • Enhances Accuracy Potential & Optimizes Mounting & Sling Attachments Machined aluminum handguard is similar to original T-Series handguard, but with a slimmer profile, lighter weight and QD swivel sockets for easy sling attachment. Attaches directly to the upper receiver with included proprietary barrel nut and eliminates pressure points on the barrel that can compromise accuracy. MIL-STD 1913 rails are T-marked for accessory location and fully dehorned for a smooth, non-abrasive feel. Large vent holes keep weight down and provide plenty of air circulation to help cooling. Accommodates most gas piston systems, and includes barrel nut wrench, hardware and retaining compound. May not fit some rifles with permanently attached muzzle devices such as pinned or welded flash hiders. Minor gunsmithing required.

AR-15/M16 BUFFER TUBE ASSEMBLY BROWNELLS

policestore

Quick View
$49.99 - $69.99
  (27)
    • Check Price
      • AR-15/M16 BUFFER TUBE ASSEMBLY BROWNELLS

      • Convenient kit contains all the components needed to mount the buttstock of your choice on an AR-15 rifle or carbine. Perfect for stock conversions such as altering a rifle to accept a collapsible carbine stock. All parts are manufactured from the highest quality materials and held to strict dimensional tolerances for proper fit and function. Commercial carbine kit comes with 1.17" O.D., six-position receiver extension for use with commercial or “universal” buttstocks. Mil-Spec kit has a 1.14" O.D., five-position receiver extension for correct fit of military M4 carbine buttstocks. M4 buttstocks and clones will not fit Commercial tubes.

REMINGTON 700 SHORT ACTION CHASSIS W/ TWO 5RD MAGAZINES MODULAR DRIVEN TECHNOLOGIES

policestore

Quick View
$699.99 - $809.99
  (18)
    • Check Price
      • REMINGTON 700 SHORT ACTION CHASSIS W/ TWO 5RD MAGAZINES MODULAR DRIVEN TECHNOLOGIES

      • Gives A 700 The Accuracy Of A Benchrest Rifle With AR-15 Ergonomics Aluminum chassis system anchors a Remington 700 barreled action in a V-shaped bedding block for a rock solid mounting that helps ensure consistent accuracy. Combines the accuracy of a benchrest rifle with the familiar ergonomics of the AR-15/M16 platform. Straight-line design directs recoil force directly to the rear, dramatically reducing muzzle rise and time to get back on target for follow-up shots. Bottom metal is configured to accept detachable box magazines, available separately. Integral Picatinny rail above the receiver provides an ultra-stable scope platform with built-in 20 MOA elevation for extended-range shooting. Accepts any AR-15 pistol grip, receiver extension tube, and buttstock to increase the rifle’s versatility by mounting a variety of popular AR-15 accessories. Free-float aluminum forend has a full-length Picatinny rail on top and mounting holes to accept Magpul® MOE® L3 and L5 accessory rails (available separately) for lights, lasers, bipods, and other tactical accessories. Available in black or flat dark earth. Short action chassis is available with two 5 or 10 round magazines.

S&W M&P THREADED BARRELS STORM LAKE

policestore

Quick View
$232.99
  (19)
    • Check Price
      • S&W M&P THREADED BARRELS STORM LAKE

      • Features: Machined 416 Stainless Steel Smith & Wesson M&P Barrels Black Isonite QPQ finish Held to tolerances of .001” Cut-broach rifling 1-16 twist Include thread protector Rc 40-42 May require minor fitting Available for Full Size 9mm, 40S&W and 45ACP M&Ps 9mm Barrel available with ½-28 or ½-32 threading (for suppressor without o-ring) 40 S&W Barrel gas 9/16-24 threading (for suppressor without o-ring) 45ACP Barrel has .578”-28 threading (for suppressor without o-ring) Benefits: Cut-broach rifling allows for cast bullets, as well as jacket bullets to be used Tight tolerances maximize accuracy Threading allows for attachment of suppressors or other muzzle devices Black Isonite QPQ finish protects the Stainless Steel while providing a subdued, non-glare finish

SIG SAUER HD™ TRITIUM NIGHT SIGHT SETS TRIJICON

policestore

Quick View
$134.00
  (97)
    • Check Price
      • SIG SAUER HD™ TRITIUM NIGHT SIGHT SETS TRIJICON

      • The HD Night Sights were specifically created to address the needs of tactical shooters. The three dot green tritium night sight set’s front sight features a taller blade and an aiming point ringed in photoluminescent paint while the rear sight is outlined in black and features a wider U-shaped notch. This unique configuration increases visibility and quickens front sight acquisition—even in transitional lighting. Additionally, the front surface of the rear sight is steeply hooked to assist in emergency one-handed slide operation. The HD Night Sights are designed to shine—even in the most demanding conditions. Green tritium lamps are warranted for 12 years from date of manufacture.

THREAD PROTECTORS for GLOCK® LONE WOLF DIST.

policestore

Quick View
$13.45
  (5)
    • Check Price
      • THREAD PROTECTORS for GLOCK® LONE WOLF DIST.

      • Protects your threaded barrel when an accessory is not installed. Fits Lone Wolf threaded barrels and others with the specified thread pattern only. “GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.  Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.  The use of Glock on this page is merely to advertise the sale of Glock parts or components.  As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.

RSA™ RAIL SLING ATTACHMENT MAGPUL

policestore

Quick View
$28.99
  (34)
    • Check Price
      • RSA™ RAIL SLING ATTACHMENT MAGPUL

      • Puts A Forward Attachment Point Exactly Where You Need It Low-profile sling loop clamps to any MIL-STD 1913 Picatinny or STANAG 4694 handguard rail Provides a secure forward mounting point for the Magpul MS2 or similar clip-on sling Can be installed on left or right side of top rail, or side or bottom rails for multiple alternate sling configurations Angled loop prevents snagging on other gear Rugged, all-steel construction withstands up to 300 pounds of stress pressure, so it wont fail under hard use

HARRIS BIPOD MOUNT AMERICAN DEFENSE

policestore

Quick View
$66.99
  (57)
    • Check Price
      • HARRIS BIPOD MOUNT AMERICAN DEFENSE

      • 6061 T6 aluminum construction Hard coat T3 Mil-Spec anodized finish Made for use with Harris bipod Snaps on and off quickly Made in the U.S.A. Includes manufacturer's lifetime warranty Fully adjustable to fit both in spec and out of spec rail systemsThe American Defense Ad-BP Mount makes the Harris bipod even better. This mount gives you quick detach capability so it moves easily from one gun to another.The Ad-BP Mount is made of 6061 T6 aluminum with a durable, hard coat anodized finish. It comes with a lifetime warranty from American Defense and was made with pride in the U.S.A.

AICS STYLE 10RD 223/5.56 MAGAZINE ACCURATE MAG

policestore

Quick View
$69.99
  (66)
    • Check Price
      • AICS STYLE 10RD 223/5.56 MAGAZINE ACCURATE MAG

      • FEATURES: Constructed of heat treated steel Coated with a black Teflon finish Polymer followers Made in USA AICS style magazines, fit AICS stock and other AICS compatible bottom metals .223 magazine features the same steel body and construction .223 magazine has a polymer insert to guide the smaller cartridge 10rd .223 magazine shares the same exterior dimensions as the 308  magazines 3.050” overall length 3.850” magazine is compatible with Savage 110 338 rifles 3.850” magazine also replaces magazine sold with 100-008-973 BENEFITS: High quality USA made magazine that works with AICS compatible rifles and bottom metals Teflon finish and polymer follower ensure smooth and reliable feeding Long action magazines allow for choice of cartridge length to match your action and load OEM magazine used by many American firearm manufacturers

HACKATHORN NIGHT SIGHT SETS FOR GLOCK® AMERIGLO

policestore

Quick View
$77.99
  (46)
    • Check Price
      • HACKATHORN NIGHT SIGHT SETS FOR GLOCK® AMERIGLO

      • Features: Ameriglo Hackathorn Sights feature a green tritium insert surrounded by an orange outline on the front sight, paired with a matte black rear sight Front Tritium insert is manufactured by Trijicon and installed by Ameriglo Steel sights are finished with black nitride Available for Glock® and Springfield XD and XDM Benefits: Bright Tritium front sight with large orange outline allows for the user to quickly pick up the front sight Matte black rear sight allows the user to quickly pick up the front sight, while still allowing for accurate shot placement Black nitride finish provides a durable and corrosion resistant exterior “GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.  Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.  The use of Glock on this page is merely to advertise the sale of Glock parts or components.  As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.

REMINGTON TRAK-LOCK II GHOST RING SIGHT SET SCATTERGUN TECHNOLOGY

policestore

Quick View
$119.99 - $149.99
  (52)
    • Check Price
      • REMINGTON TRAK-LOCK II GHOST RING SIGHT SET SCATTERGUN TECHNOLOGY

      • High Precision Sight Acquisition Night Or DayExtremely fast sight acquisition during day or low light conditions.Achieve high precision aim with a combination self-illuminating, tritium dot front sight & large light gathering rear ghost ring.