Categories


AR-15/M16 RAIL COVER ERGO GRIPS

policestore

Quick View
$16.99
 
    • View
      • AR-15/M16 RAIL COVER ERGO GRIPS

      • Get A Non-Slip Handhold For Improved Weapon ControlImprove weapon control with a positive gripping surface of molded polymer for a comfortable, non-slip hand hold.Protect your hands from exposed rail edges.Prevent damage to rails during storage or transport.Made in the U.S.A.

HI-POWER REAR TRU-DOT NIGHT SIGHT MEPROLIGHT

policestore

Quick View
$64.20
 
    • View
      • HI-POWER REAR TRU-DOT NIGHT SIGHT MEPROLIGHT

      • Single, rear sights only. Replace damaged units or upgrade current rear sights.  Tritium rear sights are available in green for most handguns, and in orange and yellow.

AR-15/M16 IMPROVED ALUMINUM REDI-MAG BOONIE PACKER PRODUCTS

policestore

Quick View
$149.99
 
    • View
      • AR-15/M16 IMPROVED ALUMINUM REDI-MAG BOONIE PACKER PRODUCTS

      • Don’t lose precious seconds in competition or combat fumbling for a spare magazine during a reload. This rugged speed loading system clamps directly to the lower receiver of any AR-15/M16 rifle or carbine and securely holds a second, fully loaded magazine alongside the mag well for super-fast mag changes. More reliable and easier to use than improvised methods, like taping two magazines together, that can cause malfunctions at critical moments. Closed-top design protects the spare mag from rain, dirt, dust, and debris and prevents the top round from jumping forward under recoil. Independent release system lets you drop the spare mag and the mag in the weapon separately to allow tactical reloads and greater flexibility in clearing malfunctions. Bolt Catch Extension (BCE) mounts directly to the factory bolt catch and lets you release the bolt, with or without the Redi-Mag attached to the gun, simply by slapping the BCE with an open palm. Installation requires no permanent alterations to receiver or mag well. Designed for mil-spec receivers; may not fit custom billet receivers. Machined Aluminum model offers lighter weight and a hinged mounting bracket for easier attachment to your rifle; does not have BCE.

AR-15/M16 B.A.D. LEVER™ MAGPUL

policestore

Quick View
$28.45
  (20)
    • Check Price
      • AR-15/M16 B.A.D. LEVER™ MAGPUL

      • Release Bolt With Trigger Finger, Improves Readiness & EfficiencyKeep hand in the ready position on the pistol grip for improved readiness & weapon handling efficiency.Operate the bolt catch with your trigger finger using battery-assisted, extended bolt release.Trigger finger can stay outside the triggerguard as you operate lever, factory bolt catch retains normal function with B.A.D. installed.Easy to install & removeno weapon disassembly required.

AR-15/M16 Folding Battle Sight Sets TROY INDUSTRIES, INC.

policestore

Quick View
$219.99 - $269.99
  (6)
    • Check Price
      • AR-15/M16 Folding Battle Sight Sets TROY INDUSTRIES, INC.

      • Rugged, flip-up sights provide failsafe backup when your primary optic or red dot sight fails. Sight body flips up easily when you need it and locks securely in place under powerful spring pressure and two locking detent balls, so it can’t be accidentally bumped down until you hit the spring-loaded button on the left side of the base to retract it. Base clamps securely to any military or commercial Picatinny rail using a standard flathead screwdriver. No protruding knobs or levers to catch on brush, clothing, or other equipment. Sturdy, protective “ears” shield posts and apertures from impact. Rear sights bolt to flattop receiver rail and are only .460" high when folded. Detent-locking adjustment wheel lets you change the windage setting in ½ MOA increments. HK-Style Rear - two same-plane apertures: large .190" aperture provides a wide field of view for close-in targets, while .070" aperture is calibrated for engaging long-range targets. Also available with a Tritium dot on each side of large aperture.  Front sights clamp to handguard accessory rail and are only ½" high when folded. All models have M4-type post that’s elevation adjustable in ½ MOA increments. HK-Style Front - distinctive “globe” shape that aids in fast target acquisition under stress. Also available with a self-illuminating Tritium dot on the post for precise shot placement in low-light conditions. M4/M16-Style Front - deep grooves in the sides of the housing to ensure a firm grasp for fast deployment.

P320/P250 MAGAZINES SIG SAUER

policestore

Quick View
$49.99
  (52)
    • Check Price
      • P320/P250 MAGAZINES SIG SAUER

      • Handgun Magazines for the Sig Sauer P320/P250.

AR-15/M16 USGI BACKUP IRON SIGHT MATECH

policestore

Quick View
$104.99
  (91)
    • Check Price
      • AR-15/M16 USGI BACKUP IRON SIGHT MATECH

      • Install U.S. Army standard-issue backup sightFlips up at the touch of your thumb when primary sight fails or tactical situation demands iron sightsRigorously tested at Fort Benning and Aberdeen Proving Ground for robustness, ease of use, and accuracyClick to one of eight range settings: 200, 300, 350, 400, 450, 500, 550, and 600 metersGrooved A2-style knob for easy windage adjustmentsAligns correctly with A2 front sightRounded and beveled edges wont snag on other gear

SIG SEMI AUTO MAGAZINES MEC-GAR

policestore

Quick View
$26.99 - $29.99
  (35)
    • Check Price
      • SIG SEMI AUTO MAGAZINES MEC-GAR

      • Made from certified, carbon steel; TIG welded and finished without seams, then heat treated for durability. These are the same magazines that are supplied by many European handgun makers as original equipment.

AR-15 ALPHA RAIL HANDGUARDS TROY INDUSTRIES, INC.

policestore

Quick View
$159.99 - $199.99
  (78)
    • Check Price
      • AR-15 ALPHA RAIL HANDGUARDS TROY INDUSTRIES, INC.

      • Easy-To-Align Free-Float Handguards; Fixed Quad-Rail & User-Configurable Models Machined aluminum free-float handguard employs a unique barrel nut and rotary-locking system to ensure proper alignment of top rail with receiver rail. Handguard slides over barrel and gas tube at an offset angle, until the notched barrel nut indexes in the internal grooved channel for a secure fit. Two hex head screws lock down the handguard, and a built-in stop prevents over tightening. Vent holes let heat escape the barrel and minimize weight. White alpha-numeric designators on the cross-slots ensure easy repeatability of accessory positions.  Streamlined Alpha models have a single, top Picatinny rail, deep horizontal grooves for a secure no-slip grip, and additional ventilation holes to reduce weight and dissipate heat. Come with three bolt-on rails for mounting additional accessories exactly where you need them. Alpha models fit standard factory AR-15/M16 barrel nut.

AR-15/M16 20RD 223/5.56 USGI SS MAGAZINE BROWNELLS

policestore

Quick View
$13.99
  (71)
    • Check Price
      • AR-15/M16 20RD 223/5.56 USGI SS MAGAZINE BROWNELLS

      • A battle rifle is only as reliable as its magazine – make sure the one in your rifle is from Brownells. When the difference between a “bang” and a “click” is life and death, a magazine failure is more than inconvenient – it can be fatal. So when we decided to build our own AR-15/M16 magazines, reliability was our first priority. Some of us have sons and daughters serving overseas or in law enforcement, and we aimed to build the kind of magazine we’d trust their lives with. We started with a clean slate, then worked out the bugs on the drawing board and the test range before we offered a single mag for sale, so you get a magazine of uncompromising quality and reliability that’s built to last and ready to run hard. When failure is not an option, these magazines deliver on the range, in the field, in a tactical situation, under fire. Load these smooth-feeding magazines to maximum capacity and fire the full 30 rounds you expect. No jams, no misfeeds, no hangups. All components are made of mil-spec materials and are manufactured under strict, ISO quality control standards. The heat-treated, welded aluminum body is hard-anodized for superior corrosion resistance, then given a tough, dry-lube coating to eliminate the need for additional lubricants that would attract dust, sand, or dirt. The latest military-type, glass-fiber reinforced composite follower further guarantees flawless feeding in the harshest tactical conditions. Choose from a mil-spec stainless steel spring  Updated material and design features like those in our 30-round magazine have been adapted to our straight-bodied, 20-round model. All models are available in standard military Gray. Since we manufacture these mags ourselves, we can maintain a large inventory. So, if you need magazines in a hurry, even in quantity, we can get them to you ASAP.

308 AR SILENT CAPTURED SPRING SYSTEM J P ENTERPRISES

policestore

Quick View
$132.99
  (81)
    • Check Price
      • 308 AR SILENT CAPTURED SPRING SYSTEM J P ENTERPRISES

      • Drop-in captured-spring recoil system helps your AR function more smoothly and quieter without any permanent modifications. The carefully balanced, custom-ground buffer spring, combined with the JP LMOS buffer, greatly reduces friction and vibration - say goodbye to the annoying “spoon over a cheese grater” noise of conventional springs and buffers. Fits buffer tubes for both M4-style collapsible stocks and also, using the included spacer, the longer tubes for fixed rifle stocks. The Alternative Spring Pack Kits are a pack of 3 different spring weights for the JP Silent Captured Spring that allow custom tuning of the device to a given rifle. While the default spring offers the best performance for the widest range of configurations, a simple disassembly and reassembly of the JPSCS-10 with a slightly different spring rate can yield truly optimized performance, particularly for rifles without an adjustable gas block. The Spring Packs are available separately or with a Standard or Heavy Capture Spring.  

AR-15/M16 PMAG 40-ROUND GEN M3 MAGAZINES MAGPUL

policestore

Quick View
$184.99
  (13)
    • Check Price
      • AR-15/M16 PMAG 40-ROUND GEN M3 MAGAZINES MAGPUL

      • Super-Durable & Ultra-Dependable PMAG Refined & Battle-Hardened By Combat Experience The polymer magazine that revolutionized magazine technology for the AR-15/M16/M4 platform just got even better. The third-generation PMAG further expands the strength, reliability, and versatility of the original PMAG. Along with all variants of the AR-15/M16/M4, the GEN M3 is fully compatible with the HK® 416 and MR556A1, M27 IAR, British SA-80, and even the FN® SCAR™ MK 16/16S. It’s molded from a polymer formula that delivers distinctly greater resistance to crushing and all forms of impact, with extra reinforcement in the mag catch and feed lip areas. A new-design four-way anti-tilt follower ensures even smoother feeding, even when contaminated by dust or grit. Pop-off dust cover, included, helps minimize debris intrusion and prevent damage during storage. The removable floorplate is both stronger and slimmer for easier side-by-side carry in tight mag pouches. A pen dot matrix on each side allows consistent ID marking that resists handling wear. PMAG 40 has solid sides. The added capacity means fewer reloads, saving precious seconds for competition shooters.  

AR-15/M16/ 308 AR ACCU-WASHER MUZZLE DEVICE ALIGNMENT SYSTEM PRECISION ARMAMENT

policestore

Quick View
$24.99
  (72)
    • Check Price
      • AR-15/M16/ 308 AR ACCU-WASHER MUZZLE DEVICE ALIGNMENT SYSTEM PRECISION ARMAMENT

      • Indexes Muzzle Accessories Precisely Without Peel Or Crush Washers These stainless steel washers are precisely machined to within .0001" to allow accurate indexing of muzzle brakes and flash hiders without the need for peel or crush washers. Set includes 18 individual washers of different thicknesses to allow 360 degree timing in 20 degree increments. Only one washer is needed for each application.

S&W M&P ACTION ENHANCEMENT COMPONENTS APEX TACTICAL SPECIALTIES INC.

policestore

Quick View
$92.99 - $97.99
  (95)
    • Check Price
      • S&W M&P ACTION ENHANCEMENT COMPONENTS APEX TACTICAL SPECIALTIES INC.

      • Improve Your Accuracy In Competition Or CarryPrecision-made kits contain everything you need to shorten over-travel, reduce trigger reset and lighten the pull for an immediate improvement in accuracyKits include hard sear, ultimate striker block, striker spring, sear spring, and trigger return springEngineered for a drop-in fit, however gunsmith installation recommendedCompetition Kit yields a consistent sub-3 lb. trigger pull, shorter over-travel and reduced resetStriker spring and trigger return spring are shot peened to extend service lifeDesigned for IDPA, USPSA or Steel Challenge competition (not for duty/carry or self-defense applications)Duty/Carry Kit delivers a smooth, consistent 5 lb. trigger pull with short over-travel and reduced reset

FAL 308/7.62 MAGAZINES D.S. ARMS

policestore

Quick View
$18.99 - $23.99
  (15)
    • Check Price
      • FAL 308/7.62 MAGAZINES D.S. ARMS

      • Brand-New, Metric-Pattern, All-Steel Construction Top-quality, new-manufacture all-steel magazines keep your metric-pattern FN FAL running by offering you an affordable option to the few remaining surplus FAL magazines on the market. Body, spring, follower and floorplate are all made from stamped steel to ensure a long service life. Removable floorplate aids in cleaning. Sure beats trying to keep old "seen better days" mags working!

AR-15/M16 9MM MAGAZINES BROWNELLS

policestore

Quick View
$34.99
  (53)
    • Check Price
      • AR-15/M16 9MM MAGAZINES BROWNELLS

      • Features: Rugged heat treated steel magazine body Durable steel follower Matte black Xylan coated magazine body Xylan coating drastically reduces friction and provides excellent corrosion resistance Bolt hold open tab Easy to remove floorplate allows for quick maintenance and cleaning Round count indicator windows allow for a quick assessment of remaining ammunition Fits AR-15 rifles that accept Colt style magazines

AR-15 AR GOLD TRIGGER AMERICAN TRIGGER CORPORATION

policestore

Quick View
$283.99
  (19)
    • Check Price
      • AR-15 AR GOLD TRIGGER AMERICAN TRIGGER CORPORATION

      • Drop-In Fire Control System Gives Light, Smooth PullSelf-contained trigger/assembly installs in minutesLight 3-lb. pull and crisp release that doesnt compromise reliability or safetySmooth, two-stage pull profile lets shooter build force steadily, maintaining precise control and keeping his attention on the targetUltra-short .03" reset aids in fast, accurate follow-up shotsFor added safety, a second, independent sear blocks the hammer if it slips off the primary sear, as when the weapon is dropped or suffers hard impactIf safety sear captures the hammer, pulling the trigger will still fire the rifleREDUCES TRIGGER PULL WEIGHT! Check department policies and/or get approval from department armorer/trainer before duty use

AR-15/M16 ACS™ BUTTSTOCK MAGPUL

policestore

Quick View
$85.45
  (42)
    • Check Price
      • AR-15/M16 ACS™ BUTTSTOCK MAGPUL

      • M4 Buttstock With Extra Storage Options For Tactical OperationsGives tactical operators extra storage options for cleaning supplies, ear plugs, spare parts, or other small items, removable battery storage compartments run the full length of the extra-wide comb, holding 2 AA or 3 CR-123 batteries.Secure, comfortable cheekweld with a wide, contoured area.Advanced dual-locking lever prevents accidental operation, yet still allows fast LOP adjustment.Molded, beveled edges eliminate snags.Made in the U.S.A.Check out the 360° Image of the Magpul AR-15/M16 ACS™ Buttstock.

AR-15 GEN II SS SERIES FREE FLOAT HANDGUARD MIDWEST INDUSTRIES, INC.

policestore

Quick View
$139.95 - $189.99
  (4)
    • Check Price
      • AR-15 GEN II SS SERIES FREE FLOAT HANDGUARD MIDWEST INDUSTRIES, INC.

      • Machined aluminum free-float handguard offers many of the same features as the original SS Series handguards, with less weight and a slimmer profile. Only 1-1/2" wide, the Gen 2 models include a bipod stud and three bolt-on 2-1/2" rail sections, one with a built-in anti-rotation QD socket, that can be mounted anywhere. 1 rail is aluminum and 2 are polymer. MIL-STD 1913 top rail offers T-marks for mounting points, and gives a neat, monolithic look with your flattop upper. Included barrel nut and barrel nut wrench enable easy mounting. Accepts Gen 2 SS-Series  accessories only, no original SS accessories. 7" Carbine and 9" Mid-length models leave the gas block exposed. 10" Carbine, 12" and 15" Rifle models require low-profile gas blocks.

AR-15/M16 AFG2 ANGLED FORE GRIP MAGPUL

policestore

Quick View
$33.20
  (30)
    • Check Price
      • AR-15/M16 AFG2 ANGLED FORE GRIP MAGPUL

      • Low-profile forward grip/hand stop takes advantage of natural body mechanics to give the shooter more precise control, faster pointing, and less operator fatigue. The Magpul AFG™ (Angled Fore Grip) positions the support hand close to the centerline of the bore for maximum recoil control to aid in fast, accurate follow-up shots. Provides a consistent reference point for finding the correct hand position quickly when mounting the weapon under stress. The natural, ergonomic hand position with the palm facing up results in better blood flow than the “clenched fist” stance often used with vertical grips that leads to fatigue and loss of sensation during long periods in the ready position. Improves on the “thumb break” hold often used with standard vertical grips by allowing the thumb to rest comfortably alongside the top rail, pointing forward, with the rest of the hand in full contact with the forend. Heavy-duty reinforced molded polymer construction stands up to the hard knocks of tactical operations, and deep, molded-in grooves help you maintain a firm grip even with wet hands. Interchangeable inserts give the choice of a straight, uninterrupted gripping surface or one with a convenient ledge to support the index finger. Slides over any Picatinny-style rail and locks securely in place with a hardened steel crossbolt. The more compact AFG2™ is shorter and narrower to take up even less rail space, with enough clearance to fit a larger variety of weapons. Both models may be installed on tactical shotguns and other rifles with railed forends; won’t interfere with insertion and removal of magazines on AK-47s.

1911 45ACP COBRA MAGAZINES TRIPP RESEARCH, INC.

policestore

Quick View
$36.95
  (50)
    • Check Price
      • 1911 45ACP COBRA MAGAZINES TRIPP RESEARCH, INC.

      • Features: Stainless Steel body Hybrid polymer/steel follower Steel portion of the follower engages the slide catch, preventing premature wear on the follower 7rd magazines available with a welded base or polymer base pad 8rd magazine available with polymer base pad Available in Government and Officer sizes

AR-15/M16 MOE GRIP MAGPUL

policestore

Quick View
$18.95
  (37)
    • Check Price
      • AR-15/M16 MOE GRIP MAGPUL

      • Improves Comfort For Better Weapon Handling & ControlGives the shooter a solid, secure grasp. Easy to install.Rigid, fully supported one-piece construction from the same reinforced, high-impact polymer as the MIAD grip, with crackle texture on the sides and deep horizontal grooves on frontstrap and backstrap.Curved beavertail similar to the MIAD B2 insert fills the grip-to-receiver junction to help you maintain a comfortable hold and protect the web of your hand during sustained firing.Compatible with Magpul MIAD Grip Cores and Enhanced Aluminum Triggerguard, available separately. Check out the 360° Image of the Magpul AR-15/M16 MOE™ Grip in Black.Check out the 360° Image of the Magpul AR-15/M16 MOE™ Grip in Dark Earth.

AR-15/M16 STR MIL-SPEC BUTTSTOCKS MAGPUL

policestore

Quick View
$75.95
  (44)
    • Check Price
      • AR-15/M16 STR MIL-SPEC BUTTSTOCKS MAGPUL

      • Adjustable Carbine Stock With Internal Battery Storage An enhanced version of the Magpul CTR® stock, the STR (“Storage/Type Restricted”) buttstock features two 4¼" left- and right-side positioned battery storage tubes and a wider cheekweld for extra comfort. Rubber caps at the rear keep the storage compartments resistant to water incursion, yet pop off easily for access to two AA or two CR-123 batteries inside. Features two integral 1¼" sling loops. Includes reversible QD swivel socket. Friction locking mechanism minimizes wobble between the buffer tube and the buttstock for a solid, secure "feel", which is enhanced by the detachable .30" thick rubber rubber that adds plenty of "grab" to prevent shoulder slippage.

MOE™ TRIGGERGUARD MAGPUL

policestore

Quick View
$8.50
  (54)
    • Check Price
      • MOE™ TRIGGERGUARD MAGPUL

      • Gives You Extra Clearance On Trigger When Wearing GlovesShallow V shape provides extra clearance when wearing gloves.No more trapped or pinched fingers, eliminates gap at rear of USGI triggerguard.Wont snag on operators glove or impede speed of target engagement.Quickly replace factory guard in minutes with no permanent alterations to receiver; reinstall original guard any time.

AR-15 MBUS GEN 2 FRONT SIGHTS MAGPUL

policestore

Quick View
$37.95
  (66)
    • Check Price
      • AR-15 MBUS GEN 2 FRONT SIGHTS MAGPUL

      • Low-profile, flattop-mounted, polymer sights deploy instantly at the touch of a finger to provide backup sighting if a primary optic fails. Streamlined contours mean there’s nothing to snag on brush, sling, or other gear when folded. Spring-loaded ambidextrous release mechanism lets you hit the grooved tab on either side of the sight to deploy, and lock it in place. Hitting the same tabs retract the sight when you're done. Uses less than 1" of MIL-STD 1913 Picatinny receiver rail space and locks securely in place with the included steel crossbolt. Provides the same height over bore as standard A2 iron sights. Front sight must be mounted on a railed forend on the same plane as the receiver rail to witness correctly with rear sight. Not compatible with railed gas blocks or the MOE handguard.

VICKERS GLOCK® EXTENDED MAGAZINE RELEASE TANGODOWN

policestore

Quick View
$16.99
  (77)
    • Check Price
      • VICKERS GLOCK® EXTENDED MAGAZINE RELEASE TANGODOWN

      • Easy To Reach For Quick Mag Changes Extended magazine release is easy to find and operate allowing fast, smooth mag changes that save you precious seconds.Serrated release button is 3/64" longer than original, allowing easy thumb access without repositioning your hand. Replaces factory original without alteration. Constructed of high strength polymer composite. “GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.  Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.  The use of Glock on this page is merely to advertise the sale of Glock parts or components.  As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.

SHOTGUN SGA BUTTSTOCKS MAGPUL

policestore

Quick View
$104.45
  (83)
    • Check Price
      • SHOTGUN SGA BUTTSTOCKS MAGPUL

      • New Versatility For The World s Most Popular Shotgun Innovative, integrated accessory system lets you apply the “Magpul Method” to make the tried-and-true 12 gauge 870 into a state-of-the-art tactical shotgun exactly fitted to your mission requirements. Major components are made from the same tough, hard polymer Magpul uses for their AR-15 stocks to ensure superb durability under harsh conditions. SGA Stock – User-configurable stock offers improved ergonomics, including a spacer system that lets you tailor the length of pull to the individual shooter in ½" increments from 12½" to 14½". Ergonomically enhanced grip area is similar to a pistol grip and a recoil-absorbing buttpad delivers excellent control and pointability. Accepts optional cheek risers to change the comb height. Both sides have a slot for threading on a 1¼" wide sling. Available alone or in a set that includes the MOE Forend. The SGA Shotgun Stock is an adaptable stock for Mossberg 500/590/590A1 12 gauge shotguns, designed with a wide range of customizable features and accessories to meet individual end user needs.