Categories


PREMIUM ROLL PIN PUNCH SET BROWNELLS

gunsmith tools supplies

Quick View
$10.99 - $76.99
 
    • View
      • PREMIUM ROLL PIN PUNCH SET BROWNELLS

      • We combined our Premium Punch line and added a handy bench block to come up with the perfect punch set for the busy shop or department Armorer. Easily start, remove, and install spring pins and roll pins in firearms without damage to the pin or firearm. Starter punches are used to start the removal of roll or spring pins without causing damage to the pins or the punch. Short shaft gives more control by putting your hand closer to the pin and prevents bending the longer, standard roll pin punches. Standard punches are used to finish drive the roll pin or spring pin after it’s started. Starter and standard roll pin punches feature a special tip that centers inside the hollow pin to help prevent slippage. Complete set includes bench block, also available separately.

1911 PIN HOLE REAMERS BROWNELLS

gunsmith tools supplies

Quick View
$18.99 - $105.00
 
    • View
      • 1911 PIN HOLE REAMERS BROWNELLS

      • Deburr & Ream Frame Holes For A Precise Pin FitHardened steel, fluted reamers true-up pin holes in 1911 frames to help ensure a tight, smooth-operating pistol. Ideal for correcting out-of-round and under-size pin holes. Hand-filling polymer handles give you a secure purchase to transmit maximum torque smoothly and evenly to the hole. A must-have for building custom pistols. Available as a kit of six reamers, including reamers for both standard-size and under-size slide stop pin holes; individual reamers also sold separately.

        1911, Issue:11, Page:055 Big Book Catalog, Issue:68, Page:152

FIRING PIN KIT WILLIAMS GUN SIGHT

gunsmith tools supplies

Quick View
$5.99 - $74.99
 
    • View
      • FIRING PIN KIT WILLIAMS GUN SIGHT

      • Does Most Singles & DoublesTakes care of most single and double barrel firing pin replacements. Big Book Catalog, Issue:68, Page:207 New Product Supplement, Issue:566, Page:019

DURACOAT AEROSOL LAUER CUSTOM WEAPONRY

gunsmith tools supplies

Quick View
$34.95
  (84)
    • Check Price
      • DURACOAT AEROSOL LAUER CUSTOM WEAPONRY

      • Unique Can-within-a-Can technology provides the hardener right inside the can.  No more measuring & mixing.  Just release the hardener and shake.  Provides protection against rust and corrosion, plus excellent uv protection.  Can be applied to all types of metal, plastic, and wood.  Can be applied over bare metal, Parkerizing, anodizing, and bluing.  Remains useable for up to 48 hours once activated.  Enough for 2-4 firearms.  No baking or preheating required. Adjustable nozzle for vertical or horizontal spray. Pink Lady will require a base coat of DuraCoat 21-White. Big Book Catalog, Issue:68, Page:437

WIRE GAUGE CARBON TAPS IRWIN INDUSTRIAL TOOL CO.

gunsmith tools supplies

Quick View
$2.39 - $25.99
  (14)
    • Check Price
      • WIRE GAUGE CARBON TAPS IRWIN INDUSTRIAL TOOL CO.

      • High Quality To Help You Do The Best WorkWe supply our taps in Carbon steel whenever possible. If one should break off in a hole, the remains can be "shattered" with a punch for easy removal. All numbers in chart are shown as Nominal Size, Tap Drill Size, Clearance Drill Size.Other Taps: Fractional High Speed Big Book Catalog, Issue:68, Page:486 New Product Supplement, Issue:564, Page:013

CARBIDE FRONT SIGHT DOVETAIL CUTTER BROWNELLS

gunsmith tools supplies

Quick View
$77.99 - $80.99
  (62)
    • Check Price
      • CARBIDE FRONT SIGHT DOVETAIL CUTTER BROWNELLS

      • 60\ & 65\ Shoulder x .300"Cuts lengthwise dovetail required to install special handgun front sights from Jim Clark, Ed Brown, Bob Marvel and others. Slightly undersized to allow for precise final fitting and to compensate for any machine wear. CAUTION: For use in milling machine only. Solid carbide resists wear and easily cuts through even hardened steels. .300" (7.3mm) dia. cut, 3⁄8" (9.5mm) dia. shank. 60 or 65 shoulder. 1911, Issue:11, Page:061 Big Book Catalog, Issue:68, Page:156 Big Book Catalog, Issue:68, Page:517

LONG PREMIUM SHOP APRONS BROWNELLS

gunsmith tools supplies

Quick View
$33.99 - $37.99
  (51)
    • Check Price
      • LONG PREMIUM SHOP APRONS BROWNELLS

      • Top Quality, Custom-Made For The Professional Gunsmith Made from the best grade, tightly woven, 2-ply yarn, all-cotton duck—the same stuff they make top quality, insulated coveralls from. Solvent- and oil-proof nylon thread used throughout. Everything heavily reinforced with seams rolled, double stitched and finished, all corners and stress points bar-tacked for strength. Machine washes and dries without edges curling or losing shape. Covers from shoulders to below the knees to keep dirt /crud off your clothes. Adjustable neck strap for a custom fit. Neck and rear tie straps are double thickness for extra strength. Three pockets: a centered upper one with a sewn-in pencil slot and large lower ones on the left and right sides. AR-15, Issue:11, Page:082 AR-15, Issue:11, Page:083 Big Book Catalog, Issue:68, Page:082 Big Book Catalog, Issue:68, Page:083 Big Book Catalog, Issue:68, Page:431 Big Book Catalog, Issue:68, Page:524 Law Enforcement / Police Store, Issue:08, Page:057 Personal Protection, Issue:01, Page:053

REM CHOKE-STYLE TOOLING MANSON PRECISION

gunsmith tools supplies

Quick View
$150.00 - $160.00
  (9)
    • Check Price
      • REM CHOKE-STYLE TOOLING MANSON PRECISION

      • Fast, Accurate Choke Tube Installations Using Reamers From Dave MansonA quick and easy method to install choke tubes using a lathe (can be done by hand, however, a lathe gives superior results). Tap and reamer are precision ground from high speed steel and use the same interchangeable pilot bushings. Reamer has an enhanced end relief that provides a faster cut. Pilot bushings are available in diameter increments of .001", and are 2" long for accurate bore alignment. Factory instructions are included. Note: Read and understand the installation requirements on page 62 before proceeding. For best results, remove any existing choke with the Angle Blade Expanding Choke Reamer prior to using the Loon Lake Choke reamer. Click here for proper installation requirements. Uses the same tap and bushings as Win-Choke, requires a different reamer to position threads in a different location. Barrels threaded to this system accept Rem-Choke-style and Remington factory tubes. Big Book Catalog, Issue:68, Page:513

1911 BARREL LOCKING LUG FILE BROWNELLS

gunsmith tools supplies

Quick View
$63.99
  (46)
    • Check Price
      • 1911 BARREL LOCKING LUG FILE BROWNELLS

      • For Critical Fitting Of Match-Grade Barrel Top LugsPrecision, surface-ground file deepens barrel locking lugs without increasing width. Safe on two sides to let the gunsmith file to a close fit with no chance of widening lug area. #2 cut, Swiss pattern cuts smoothly; little or no additional stoning/polishing is needed. 1911, Issue:11, Page:055 Big Book Catalog, Issue:68, Page:152

FIXED-BLADE SCREWDRIVER MASTER SETS BROWNELLS

gunsmith tools supplies

Quick View
$199.99 - $299.99
  (43)
    • Check Price
      • FIXED-BLADE SCREWDRIVER MASTER SETS BROWNELLS

      • We're tickled as all get out to offer our Fixed-Blade, Gunsmith's Screwdriver Set designed and developed by gunsmiths for those gunsmiths who love solid, fixed-blade screwdrivers that fit their gun screws right - and simply won't have it any other way! THE PERFECT TIP & BLADE We started with the tip of the blade, the part that has to fit the gun screw properly, and the most important part of a gunsmith's screwdriver. The blade tips are then custom, precision-ground in a crisply radiused, hollow-ground shape to give maximum strength. And, the ideal parallel section is ground at the tip to fit the screw slot properly through the full width and depth of the slot. (This is what keeps you from buggering screws - a blade tip that evenly distributes the turning torque applied at the handle to the full width and depth of the screw slot.) We made the blades short (you're only 2½" from the work piece) to give you maximum control, eliminate wobble and tilt. Yet, they are long enough to give you a good view of the work you are doing. Tolerances are kept extremely tight for the entire blade, and the entire blade/shank is hardened to Rc 58-60 for proper, maximum strength and toughness in a screwdriver. THE SHANK DESIGN The long parallel shank maintains the same diameter as the width of the blade. This allows repeated regrinding’s and reshaping’s while still maintaining the original blade width. In addition, it allows the screwdriver to go into holes or recesses that are only screw-slot wide. The hex section allows you to use either an open-end wrench or one of the Midget Ratchets for more turning power on the heavier blades. Finally, we put a size-sequence number - from 1 (smallest) to 20 (largest) on the hex section of each individual screwdriver so you can pick the size you want quickly. HANDLE CUSTOM-DESIGNED FOR YOU The handles are custom-made to our specifications to fit your hand well. They aren't too bulky, yet give a mighty good grip when large, tight screws have to be broken loose, and "fingertip" control when dealing with tiny, delicate screws. We use the same handle on all 20 screwdrivers to keep the same hand-fit and feel throughout the set. DISTINCTIVE PRESENTATION BENCH BLOCKS In keeping with the superb quality of the screwdrivers, we designed two magnificent Solid Oak Bench Blocks to hold your Fixed-Blade Gunsmith's Screwdrivers. They are real beauties. Each one has 3 tiers to make them compact, you can see both the width/thickness of the blade, the identifying number stamped on one flat of the exposed hex section and, the 20 holes (Master block) or 10 holes (Add-On block) are far enough apart for good finger room. Every Bench Block is finished in a tough, non-gloss lacquer, and has anti-skid feet to keep it in place on your bench. Finally, the Master Set Block includes a Personalized Name Plate for you to mount on your Bench Block, we have included the order form with each Block for you to choose which style of plate you want and the wording you would like. It's all paid for - and makes the Block perfect for awards or gifts, and just telling the world the Screwdrivers belong to you. The Add-On Block for the Super Master Set does not include the name plate. SETS AVAILABLE We've packaged the Screwdrivers two ways: The Master Set™ has all 20 Screwdrivers, plus the properly radiused Bit Shaping Stone, the Bench Block, and a bottle of Brownells Best Penetrating Oil™. To create The Super Master Set™ we took the Master Set and added 6 Allen head fixed blade screwdrivers, 3 Phillips "Anti-Cam" screwdrivers, and the Add-On Block. As with all our tools and supplies, they are guaranteed to please you, the most demanding craftsman in the world - the working gunsmith.

DAVE REAMERS FLOATING REAMER HOLDER MANSON PRECISION

gunsmith tools supplies

Quick View
$25.00 - $120.00
  (21)
    • Check Price
      • DAVE REAMERS FLOATING REAMER HOLDER MANSON PRECISION

      • Keeps Reamer Aligned To Barrel For Accurate ChambersAllows the reamer to remain parallel with the bore, while compensating for up to .030" of misalignment or wear between tailstock and chuck. Wide bearing surface, plus hardened and ground components give smooth movement with no cam-to-center lockup. Low mass, aluminum head lets the tool quickly respond to the slightest out of roundness. Hardened steel bushing eliminates wear in the reamer socket. Features interchangeable shanks; holder is reamed to accept shank with #2 Jacobs taper. Furnished with 1/2" diameter straight shank. Big Book Catalog, Issue:68, Page:488 Mini-Catalogs, Issue:15, Page:006 New Product Supplement, Issue:534, Page:000

NEEDLE OILER BOTTLES BROWNELLS

gunsmith tools supplies

Quick View
$7.99
  (78)
    • Check Price
      • NEEDLE OILER BOTTLES BROWNELLS

      • Leakproof, Controlled, Metered FlowProvides a consistent, small drop of your favorite lubricating oil, cleaner, bore solvent, stock stain or finish. Hollow steel "needle" accurately puts that drop of oil or solvent right where you need it most. Helps prevent over-lubrication, contamination and waste. Made from high density polyethylene plastic; fluorinated to resist breakdown from all common petroleum based solvents and protect any outer label from migration damage. Threaded aluminum top features a heavy-duty, inner, rubber seal and removable slip cap; both seal tightly and prevent leaks. Big Book Catalog, Issue:68, Page:354 Big Book Catalog, Issue:68, Page:525

OXYNATE® NO. 84 - HOT CHEMICAL BLUING COMPOUND BROWNELLS

gunsmith tools supplies

Quick View
$139.99
  (91)
    • Check Price
      • OXYNATE® NO. 84 - HOT CHEMICAL BLUING COMPOUND BROWNELLS

      • For Rebluing Stainless Steels & Cast Iron In the past, it was almost impossible for the general gun- smithing or bluing shop to blue stainless steel guns successfully. Now, with Oxynate No. 84, we have a superior formulation for stainless bluing that has met and passed all of our demands and requirements. It has worked on all the popular guns (S&W’s, Rugers, and virtually every type of stainless we could find), and even does a mighty good job on Cast Irons. It is predictable, repeatable, reliable and easy to operate. Blue an action or frame with a stainless barrel in No. 84 first, then go into the No. 7™ tank to blue the action or frame. The whole process is explained in the instructions. We highly recommend you use Oxynate No. 84 for stainless steels and cast iron. But, it is not as easy to use as Oxynate No. 7. We don’t recommend it if a little experimentation and trial- and-error aren’t acceptable; we don’t recommend it for your only bluing tank - it just takes too much messing around to replace good, old reliable No. 7. Note: Requires additional shipping & hazardous materials surcharge. Please call for freight charges. Big Book Catalog, Issue:68, Page:428

RECEIVER ACCURIZING SYSTEM MANSON PRECISION

gunsmith tools supplies

Quick View
$500.00 - $550.00
  (83)
    • Check Price
      • RECEIVER ACCURIZING SYSTEM MANSON PRECISION

      • A Real Time & Work Saver When Blueprinting Actions Precision tooling for blueprinting Remington and Winchester actions. Big Book Catalog, Issue:68, Page:505 Mini-Catalogs, Issue:15, Page:006 New Product Supplement, Issue:525, Page:000

17' SLIM HAWKEYE BORESCOPE KIT GRADIENT LENS

gunsmith tools supplies

Quick View
$769.99
  (3)
    • Check Price
      • 17' SLIM HAWKEYE BORESCOPE KIT GRADIENT LENS

      • Gets You Close Enough To Take A Really Good LookWith the Hawkeye Shot Edition Slim Borescope Kit you can buy used guns or analyze the interior of your firearm with confidence. This precise diagnostic kit allows you to ensure that bores are clean and not eroded, which means you will shoot straight every time. This Slim Borescope Kit features all the pieces you will need to keep your guns clean and in proper working condition. Included in this kit is the Slim Borescope that has a 0-degree direction-of-view and 42-degree field-of-view. A rotating 90-degree direction-of-view is achieved by sliding the included Slim Mirror Tube onto the scope. The lightweight, yet durable mini Maglite provides ample light for close or reflective objects and comes with two AA batteries. All pieces of this borescope kit have a protected spot in the lockable, metal carrying case. Big Book Catalog, Issue:68, Page:480 Law Enforcement / Police Store, Issue:02, Page:037 Mini-Catalogs, Issue:15, Page:007

1911 CARBIDE DOVETAIL SIGHT BASE CUTTER BROWNELLS

gunsmith tools supplies

Quick View
$114.99
  (26)
    • Check Price
      • 1911 CARBIDE DOVETAIL SIGHT BASE CUTTER BROWNELLS

      • 65\ Shoulder x .495"These cutters are specially designed by us and made to our specifications for cutting the sight base slot required to mount the Wichita and Novak Lo-Mount 1911 Auto sights. Use " carbide end mill to remove the bulk of the material (see drawing above) then make final dovetail cut. Final cut to lower rear of slide is done with an end mill and is not a part of the sight base cut. Made slightly undersized to compensate for variations in sight bases and milling tolerances on installation. With the popularity of custom 1911 Auto Pistols, this cutter is one that you will use frequently in your custom work. CAUTION: For use in milling machine only. Much harder and longer-lasting than HSS cutter. Use on hardened Colt factory slides. Solid carbide, 2" (5cm) long. .495" diameter cut. " (12.7mm) diameter shank. 65 shoulder. 1911, Issue:11, Page:061 Big Book Catalog, Issue:68, Page:156 Big Book Catalog, Issue:68, Page:517

65° 1911 DOVETAIL TYPE SLOT SIGHT BASE FILES BROWNELLS

gunsmith tools supplies

Quick View
$34.99 - $39.99
  (29)
    • Check Price
      • 65° 1911 DOVETAIL TYPE SLOT SIGHT BASE FILES BROWNELLS

      • The Professional Way To Safely Widen Or cut New Dovetails Designed especially for widening and final fitting after using our 65° Sight Base Cutter to cut the basic slot. Or, can open up a 60° slot to proper 65° angle if changing to a new sight design. Has true parallel cutting edges for precision filing, giving you full control over the angle of the dovetail. One cutting side only, with the other two sides safe, so you can widen or deepen sight slots safely without fear of changing the other dimensions. 1911, Issue:11, Page:061 Big Book Catalog, Issue:68, Page:156 Big Book Catalog, Issue:68, Page:479 Big Book Catalog, Issue:68, Page:518

AR-15/M16 ARMORER'S TOOL TAPCO WEAPONS ACCESSORIES

gunsmith tools supplies

Quick View
$39.99
  (98)
    • Check Price
      • AR-15/M16 ARMORER'S TOOL TAPCO WEAPONS ACCESSORIES

      • Like A One-Piece Tool Kit Handy all-in-one tool handles the tasks necessary to build and maintain your AR-15 or M16. It's a barrel nut wrench, muzzle device wrench, spanner wrench, forearm wrench, flat tip screwdriver, A2 tube remover, receptacle for ½" drive/torque wrench - and a bottle opener. Long handle give plenty of leverage for buttstock and barrel removal/installation, and the ½" drive receptacle allows the use of a torque wrench, so you can get things tightened down correctly. It even has a flat face on one side that can be used as a hammer. AR-15, Issue:11, Page:083 Big Book Catalog, Issue:68, Page:084

SINCLAIR AR-15 BOLT VISE SINCLAIR INTERNATIONAL

gunsmith tools supplies

Quick View
$24.99
  (21)
    • Check Price
      • SINCLAIR AR-15 BOLT VISE SINCLAIR INTERNATIONAL

      • Our bolt vise helps you disassemble your AR-15 bolt easily and without losing any parts. The main function of the tool is to compress the ejector so you can remove the spring pin easily. This enables you to release the pressure on the ejector slowly so the ejector and spring don't go flying off your workbench. The ejector and spring can be replaced if needed and the bolt reassembled easily. The tool cradles the bolt and holds it firmly in place while the screw assembly compresses the ejector. A hole in the vise allows the pin to drop free. The tool can also be used to hold the bolt securely while replacing gas rings and replacing the extractor. NOTE: We recommend you replace the ejector spring pin when reassembling if you have one available. A one sixteenth of an inch punch is required to remove the pin. AR-15, Issue:11, Page:087 Big Book Catalog, Issue:68, Page:088 Sinclair, Issue:5B, Page:248

POLISH-O-RAY® BROWNELLS

gunsmith tools supplies

Quick View
$16.99
  (80)
    • Check Price
      • POLISH-O-RAY® BROWNELLS

      • Shop-Proven Premium-Grade Polish For The Professional The answer to a gun polisher's dream! Made to the highest standards of quality with carefully screened, true-sized grits for reliable, repeatable results and a natural, greaseless base that doesn't leave a residue to mess up bluing or plating jobs. Packed in a formed, flexible plastic tube to stay fresh between uses. 1) Unlike hard drying abrasives, Polish- O-Ray® sets up to a medium soft surface without flinty hard flakes which, regardless of grit size being used, can do serious damage to a polished surface. 2) It is easily applied to polishing wheels without stopping the motor. Simply press the open end of the tube to your wheel; the polish adheres to the moving surface, hardens in a few seconds and is ready for use. 3) Because of its softer nature, a true, ripple-free surface is quickly obtained on all wheels. The best possible polished surface, free from ripples and bounce marks, is your assurance of a superior, professional refinishing job. Polish-O-Ray® does this for you. 4) Polish-O-Ray® has been used by gunsmiths, metal finishers, and aircraft manufacturers since the early 1940's. Wherever a quality surface, free from chatter marks, scratch marks and imperfections is required, the use of Polish-O-Ray® is a MUST. One precision manufacturer in the southeast orders by the keg. And, where else but on a gun does a perfect finish draw more praise and admiration? These beautiful finishes are the reason for Polish-O-Ray®'s continuing popularity among our country's gunsmiths and serious hobbyists. By following the "Master Metal Polisher's" technique, it is possible to obtain a top quality finishing job in a minimum of time with P-O-R®. Complete instructions are in our Bluing Instruction Booklet (#076-200-135) and the book Gunsmith Kinks™. It consists; mainly, of starting with the coarsest grit and polishing the surface in one direction; then, with the next finer grit on a different wheel polishing at 45° angles to the first "pass". By following this procedure down through the finer grit numbers, the final surface is unequaled for quality and perfection. Polish-O-Ray® is shipped in a resealable outer bag. Put the tube back in the bag, seal with a twist tie and ALWAYS store all your Polish-O-Ray® - brand new or partially used - in the refrigerator for longest life. Big Book Catalog, Issue:68, Page:423 Mini-Catalogs, Issue:05, Page:011

OPTIVISOR OPTIVISOR

gunsmith tools supplies

Quick View
$15.29 - $46.00
  (1)
    • Check Price
      • OPTIVISOR OPTIVISOR

      • Continuous Headband; Dial Adjustable DIAL ADJUSTABLE CONTINUOUS HEADBAND - Specially formed to fit. A simple twist of the adjusting dial changes head size. Sealed-in mechanism is self-locking and trouble-free. Gives better balance and even more comfort. IT TILTS - Adjustable pivots make the OptiVISOR unique - and the most handy magnifier yet. It's up, out of the way of normal vision when not in use, and there at your fingertips when you need it for magnified pinpoint clarity back at the job. CONFORMING HEADBAND - Of electrically nonconductive ABS material. Designed to fit and locate the scope in a natural, comfortable position. Total weight just 4 oz. So light you hardly know it's there. GENUINE LEATHER COMFORT BAND - Padded with orthopedic felt, making the OptiVISOR the most comfortably worn magnifier available. ABS HI-IMPACT VISOR - This tough, durable material is practically indestructible, yet always keeps its new appearance. OPTICAL GLASS LENSES - Ground and polished to precision optical standards. Beveled edges and mounted in interchangeable plastic frames. Five scientifically computed prismatic powers are available for use with any OptiVISOR FITS OVER REGULAR GLASSES - No need to take them off with the OptiVISOR. Brownells Christmas , Issue:3X, Page:019 Big Book Catalog, Issue:68, Page:424 Big Book Catalog, Issue:68, Page:480

UNTURNED BARREL...BY SHILEN

gunsmith tools supplies

Quick View
$158.99 - $238.99
  (36)
    • Check Price
      • UNTURNED BARREL...BY SHILEN

      • Unturned Blank in Chrome Moly or Stainless Steel All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a gun shoot any straighter than the accuracy capability of the barrel used. And, it is the insides of a barrel, that very small and vital area of lands and grooves over which the gunsmith has no control, that can determine whether the finished work of art is for shooting - or “just for looks”. Craftsmanship . . . not price . . . determines the quality of a barrel. But, by the same token, the customer willing to spend the money for a custom gun is shortsighted indeed, if he starts economizing and orders “just any old barrel so long as it’s cheap”. Furthermore, he is jeopardizing your reputation as a gun builder by making such a request. We, as your supplier, are laying our reputation (and yours, too!) on the line by offering you barrel blanks. They have got to be good or we are in trouble! Big trouble!! We must never sell you anything but that which will enlarge your stature with your trade. And, we feel that the Brownell Barrel, made for us by Ed Shilen, will do just that! Shilen barrels, either chrome moly or Stainless, are rifled with six lands and grooves by the “Cold Forming” process using carbide dies made in Shilen’s own plan under the most rigid controls. This rifling method achieves extremely close inside uniformity from breech to muzzle. Finished barrels are air-gauge inspected (air-gauged sensitivity is .00005" - five-one-hundred-thousandths!) and 6X borescope in- spected. All barrels, .22 through .30 caliber have groove tolerances within .0005" and uniformity within .0003" No straightening is done, and all barrels are completely stress-relieved. All stainless steel barrels are hand lapped at the factory. Only those barrels passing all spec tests are offered to the trade. Any barrel even slightly “suspect” is started through the production process again and bored to a large caliber. In no other way can quality and reputation be maintained. Slightly more expensive to produce - but vastly greater in quality and ultimate performance. Big Book Catalog, Issue:68, Page:177 Big Book Catalog, Issue:68, Page:243 New Product Supplement, Issue:571, Page:002

REVOLVER RANGE RODS BROWNELLS

gunsmith tools supplies

Quick View
$12.99 - $189.99
  (16)
    • Check Price
      • REVOLVER RANGE RODS BROWNELLS

      • Tells Instantly If Barrel & Cylinder Are In Perfect Alignment-Match & Service Grade AvailableLets you know instantly if a revolver barrel and cylinder are in perfect alignment and if cylinder crane or yoke has been sprung, thus throwing axis of each out of line with axis of barrel bore . . . for timing - “accuracy jobs” . . . locating cause of lead splatter . . . professional service inspections. An excellent tool to use when demonstrating to a customer “why”! The handle with knurled grip end is threaded to take any of the interchangeable heads, with sizes carefully selected to indicate very small misalignments. The .38 caliber heads are available in two diameters, one for Match guns that must be dead on for best performance and one for Service guns which aren’t always thoroughly clean and don’t have to meet quite as fine an accuracy standard. And, there’s a special head for the S&W K-22 which has a slightly undersized bore. Big Book Catalog, Issue:68, Page:519 Big Book Catalog, Issue:68, Page:521 Cowboy Action, Issue:03, Page:032 New Product Supplement, Issue:602, Page:022

WIN-CHOKE STYLE TOOLING MANSON PRECISION

gunsmith tools supplies

Quick View
$140.00 - $150.00
  (15)
    • Check Price
      • WIN-CHOKE STYLE TOOLING MANSON PRECISION

      • Fast, Accurate Choke Tube Installations Using Reamers From Dave Manson A quick and easy method to install choke tubes using a lathe (can be done by hand, however, a lathe gives superior results). Tap and reamer are precision ground from high speed steel and use the same interchangeable pilot bushings. Reamer has an enhanced end relief that provides a faster cut. Pilot bushings are available in diameter increments of .001", and are 2" long for accurate bore alignment. Factory instructions are included. Note: Read and understand the installation requirements on page 62 before proceeding. For best results, remove any existing choke with the Angle Blade Expanding Choke Reamer prior to using the Loon Lake Choke reamer. Click here for proper installation requirements. Thread barrels to accept original equipment and aftermarket replacement tubes from Win-Choke, Browning Invector®, Mossberg Accu-Choke®, Weatherby and Colonial Arms. Big Book Catalog, Issue:68, Page:513 New Product Supplement, Issue:566, Page:016

OXPHO-BLUE® CREME BROWNELLS

gunsmith tools supplies

Quick View
$9.99
  (78)
    • Check Price
      • OXPHO-BLUE® CREME BROWNELLS

      • Toughest Cold Blue In A No-Run CremeThe same easy application, tough finish and superb results as our liquid Oxpho-Blue with the added benefits of the creme formulaIt won't evaporate away or run off, giving plenty of work time.Cannot ship outside Continental United States. Ship UPS Ground only within U.S. Brownells Christmas , Issue:2X, Page:019 Big Book Catalog, Issue:68, Page:432 Mini-Catalogs, Issue:05, Page:011

1911 SLIDE/FRAME RAIL FILE BROWNELLS

gunsmith tools supplies

Quick View
$50.99
  (42)
    • Check Price
      • 1911 SLIDE/FRAME RAIL FILE BROWNELLS

      • One File Does It All: Trues, Deburrs & Squares Slide RailsClean up and square slide rails with one side of this file, turn it over and deburr or enlarge the rail channels with the other. Specially ground, stepped file does the job of two or more separate files and the safe edges make sure that only the areas that need to be cut, get cut. Simplifies, speeds up and adds precision to slide fitting work. 1911, Issue:11, Page:053 Big Book Catalog, Issue:68, Page:150

GUN-KOTE™ OVEN CURE, GUN FINISH BROWNELLS

gunsmith tools supplies

Quick View
$31.99
  (17)
    • Check Price
      • GUN-KOTE™ OVEN CURE, GUN FINISH BROWNELLS

      • Genuine GUN-KOTE Spray-On/Bake-On Finish In Convenient Aerosol The world-famous, ultra-thin, friction-reducing coating that lasts and lasts can now be applied to any clean, pre-heated metal part in as little as 2 hours without the extra expense of owning an air brush. Brownells has teamed up with KG Products to produce the genuine GUN-KOTE epoxy finish in a convenient aerosol that’s every bit as easy and foolproof to apply as our other, great, bake-on, gun finishes. You get the quality of genuine GUN-KOTE backed by Brownells no-hassle, complete satisfaction guarantee; an unbeatable combination!    Now you can easily apply the self-lubricating benefits of molybdenum disulfide to alloy steel, stainless steel, brass and aluminum, even properly prepared nickel plating, in just minutes. Prepare, clean and pre-heat your part to 100°, spray on Brownells GUN-KOTE and allow the part to dry. Bake the part in an oven at 325° for one hour and you’re done. You’ve protected the metal parts of your valuable firearm from rust, corrosion, and scratches with a beautiful finish that will wear for years and help keep your gun looking just like new.    Brownells GUN-KOTE is a durable, second-generation epoxy, thermo-set resin finish that will not break down, peel or dissolve. In fact, once it’s applied, the only way to remove Brownells GUN-KOTE is to abrasive blast the part. It is resistant to all known gun solvents and thinners. Each coat is approximately .0004" thick so Brownells GUN-KOTE can be used on both internal and external parts where a close-tolerance fit is required without having to worry about interference. This makes Brownells GUN-KOTE the perfect, maintenance-free coating for handgun slides and frames, shotgun receivers and magazine tubes, rifle actions and bolts, anywhere you need an ultra-thin, self-lubricating, permanent coating that protects and wears like crazy. Brownells Guntechs recommend use of 084-179-004 All Purpose Clean Out Nozzle prior to attempting to spray this product. 1911, Issue:04, Page:061 AR-15, Issue:04, Page:077 Big Book Catalog, Issue:68, Page:435 Law Enforcement / Police Store, Issue:02, Page:035 Mini-Catalogs, Issue:05, Page:011 New Product Supplement, Issue:581, Page:015