Categories


308 AR LOWER RECEIVER VISE BLOCK BROWNELLS

gunsmith tools supplies

Quick View
$45.99
 
    • View
      • 308 AR LOWER RECEIVER VISE BLOCK BROWNELLS

      • Protects Receiver From Damage When Clamping In ViseHeavy-duty vise block takes all the clamping force, so your expensive lower receiver won’t get scratched, distorted, or otherwise damaged. Insert block into the mag well, just like an ordinary magazine, then clamp the other end in your bench vise. The magazine catch locks to the block, safely and securely holding the rifle for assembly, disassembly, cleaning, or repair. Double-ended design fits ArmaLite® AR-10®, Bushmaster .308, DPMS Panther™ LR-308, and Remington R-25. Does not fit Rock River Arms lower receivers. Machined from rugged, durable, chemical-resistant Delrin® polymer; will not mar or scratch weapon’s finish.

        AR-15, Issue:11, Page:085 Brownells Christmas , Issue:4X, Page:016 Big Book Catalog, Issue:68, Page:086 Mini-Catalogs, Issue:05, Page:006 New Product Supplement, Issue:621, Page:017 Sinclair, Issue:4S, Page:023

CAR-15/M4 BUTTSTOCK WRENCH BROWNELLS

gunsmith tools supplies

Quick View
$79.99
 
    • View
      • CAR-15/M4 BUTTSTOCK WRENCH BROWNELLS

      • Solidly Engages The Receiver Extension Nut For Easy Installation & Removal Of Carbine ButtstocksDedicated wrench has four precision-machined teeth that ensure full, non-slip engagement of all four notches in an M4-type receiver extension nut for easy removal and installation of collapsible carbine buttstocks. Transfers all the torquing force to the nut for fast tightening or removal without risk of damage to nut, extension tube, or receiver caused by the wrench slipping. Includes the handy add-on features of our universal M4 buttstock tool: pry blade/screwdriver, ½" square torque drive opening, fixed stock receiver extension remover, and a convenient hole in the handle for hanging the wrench on a pegboard. Heavy duty steel construction, machined from a single piece of .312” thick steel, with a durable black oxide finish. AR-15, Issue:11, Page:083 Brownells Christmas , Issue:3X, Page:019 Big Book Catalog, Issue:68, Page:083 Law Enforcement / Police Store, Issue:08, Page:052 New Product Supplement, Issue:621, Page:015

CENTERFIRE HANDGUN DUMMY ROUNDS BROWNELLS

gunsmith tools supplies

Quick View
$8.99 - $89.99
 
    • View
      • CENTERFIRE HANDGUN DUMMY ROUNDS BROWNELLS

      • Inert, Factory Spec Dummies Give Safe Function TestingManufactured to exact specifications, including diameter and length dimensions, weight and balance of factory loaded ammo, these DUMMIES have the proper functioning characteristics to reliably check magazine feeding, action timing, extraction and ejection of all guns. The only professionally accepted and safe way to check gun functioning; live ammo should never be used except in actual test-firing on the range - after you have checked the gun with DUMMIES. The very reasonable cost per DUMMY is an added incentive to use them regularly. The blackened case makes them distinct, and instantly recognizable as DUMMIES, which makes them ideal - and safe - to use as a sales aid. Especially useful when demonstrating how a particular gun functions or in gun safety instruction classes. They absolutely eliminate the chance of an accidental discharge.

        Big Book Catalog, Issue:68, Page:496 Cowboy Action, Issue:03, Page:034 Law Enforcement / Police Store, Issue:08, Page:054 New Product Supplement, Issue:602, Page:022

RIMLESS RIFLE CARTRIDGES MANSON PRECISION

gunsmith tools supplies

Quick View
$100.00 - $170.00
  (41)
    • Check Price
      • RIMLESS RIFLE CARTRIDGES MANSON PRECISION

      • Outstanding Quality Reamers By Dave Manson Help You Produce Accurate ChambersEngineered and ground by one of the most respected names in firearms reamers, Dave Manson. Superb quality reamers made to SAAMI specifications, ground from M7 steel to cut precise chambers capable of outstanding accuracy. Finish Chambering Reamers feature integral throater and solid, fixed pilots.  Throating Reamers let you customize a chambering job for non-standard bullets or additional freebore length. Available as finish reamers unless listed otherwise.  AR-15, Issue:11, Page:086 Big Book Catalog, Issue:68, Page:087 Big Book Catalog, Issue:68, Page:494 New Product Supplement, Issue:602, Page:021

TORX HEAD SCOPE RING & BASE SCREW KIT BROWNELLS

gunsmith tools supplies

Quick View
$4.99 - $63.99
  (43)
    • Check Price
      • TORX HEAD SCOPE RING & BASE SCREW KIT BROWNELLS

      • 240 TORX Screws To Fit Popular Rings & Bases; Includes T-10 & T-15 HeadsA TORX head lets you set a screw down tight without the bit slipping and damaging the screw slot. They give your work a clean, finished appearance. We’ve included T-10 and T-15 TORX sizes for use in different applications. T-10 gives you plenty of additional wall thickness where the head joins the shank; T-15 has a large socket that accepts the same driver supplied with many popular brands of rings and bases. You get an economically priced assortment of 240 screws, all made right here in the USA. 1 dozen each of 20 different screws; 11 Fillister Head and 9 Weaver Oval Head styles in 3 thread sizes and 4 lengths, all in a sturdy, compartmented box. For those special jobs we have included a hardened steel, Checker/Shortener Jig that makes grinding screws to just the right length, fast and easy. Big Book Catalog, Issue:68, Page:412 Big Book Catalog, Issue:68, Page:413 Law Enforcement / Police Store, Issue:03, Page:033 New Product Supplement, Issue:593, Page:026

CERAKOTE AIR-DRY CERAMIC COATINGS NIC INDUSTRIES, INC.

gunsmith tools supplies

Quick View
$34.99 - $39.99
  (33)
    • Check Price
      • CERAKOTE AIR-DRY CERAMIC COATINGS NIC INDUSTRIES, INC.

      • Tough, Durable Coatings For Maximum ProtectionState-of-the-art, Cerakote™ Firearm Coatings provide a durable, weather- and corrosion-proof, ceramic-based protective finish that resists scratching, chipping, and abrasive cleaning solvents. Hardener and paint chemically bond into an ultra-thin coating that adheres to almost any surface for a clean, professional finish. Apply with your airbrush or HVLP touch-up gun for a smooth finish. Air Dry requires no baking and is tack free in 40 minutes, completely dry in 24 hours, and fully cured in 5 days.Items cannot be shipped to New Zealand or Australia. 1911, Issue:04, Page:00V Big Book Catalog, Issue:68, Page:437 Mini-Catalogs, Issue:05, Page:011

RIMLESS RIFLE CHAMBERING REAMERS CLYMER

gunsmith tools supplies

Quick View
$95.00 - $145.00
  (69)
    • Check Price
      • RIMLESS RIFLE CHAMBERING REAMERS CLYMER

      • Finest Workmanship & Quality; Made In USA From M-7 High Speed SteelMade by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.Note: If you do not see the caliber you are looking for below, please feel free to contact our Special Orders Department, as many additional items are avaliable from Clymer. AR-15, Issue:11, Page:086 Big Book Catalog, Issue:68, Page:087 Big Book Catalog, Issue:68, Page:493 Mini-Catalogs, Issue:15, Page:007 New Product Supplement, Issue:562, Page:008

CONTOUR #5 BARREL SHILEN

gunsmith tools supplies

Quick View
$191.99 - $350.00
  (93)
    • Check Price
      • CONTOUR #5 BARREL SHILEN

      • Contour #5 in Chrome Moly or Stainless Steel All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a gun shoot any straighter than the accuracy capability of the barrel used. And, it is the insides of a barrel, that very small and vital area of lands and grooves over which the gunsmith has no control, that can determine whether the finished work of art is for shooting - or “just for looks”. Craftsmanship . . . not price . . . determines the quality of a barrel. But, by the same token, the customer willing to spend the money for a custom gun is shortsighted indeed, if he starts economizing and orders “just any old barrel so long as it’s cheap”. Furthermore, he is jeopardizing your reputation as a gun builder by making such a request. We, as your supplier, are laying our reputation (and yours, too!) on the line by offering you barrel blanks. They have got to be good or we are in trouble! Big trouble!! We must never sell you anything but that which will enlarge your stature with your trade. And, we feel that the Brownell Barrel, made for us by Ed Shilen, will do just that! Shilen barrels, either chrome moly or Stainless, are rifled with six lands and grooves by the “Cold Forming” process using carbide dies made in Shilen’s own plant under the most rigid controls. This rifling method achieves extremely close inside uniformity from breech to muzzle. Finished barrels are air-gauge inspected (air-gauged sensitivity is .00005" - five-one-hundred-thousandths!) and 6X borescope in- spected. All barrels, .22 through .30 caliber have groove tolerances within .0005" and uniformity within .0003" No straightening is done, and all barrels are completely stress-relieved. All stainless steel barrels are hand lapped at the factory. Only those barrels passing all spec tests are offered to the trade. Any barrel even slightly “suspect” is started through the production process again and bored to a large caliber. In no other way can quality and reputation be maintained. Slightly more expensive to produce - but vastly greater in quality and ultimate performance. Big Book Catalog, Issue:68, Page:177 New Product Supplement, Issue:571, Page:002

SIGHT INSTALLATION TOOL for GLOCK® TRIJICON

gunsmith tools supplies

Quick View
$139.99
  (76)
    • Check Price
      • SIGHT INSTALLATION TOOL for GLOCK® TRIJICON

      • Install, Adjust & Remove Glock Sights Without Damage Specifically designed to install, adjust and remove all models of Trijicon Glock Sights without damage. Includes heavy-duty rear sight mover with oilite bushings that allow for very fine windage adjustments, and a front sight nut driver that fits all models of aftermarket front sights. “GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.  Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.  The use of Glock on this page is merely to advertise the sale of Glock parts or components.  As indicated in the product descriptions, not all parts and accessories on this site are official Glock products. Big Book Catalog, Issue:68, Page:324 Big Book Catalog, Issue:68, Page:519 Law Enforcement / Police Store, Issue:13, Page:017 Mini-Catalogs, Issue:01, Page:015 New Product Supplement, Issue:504, Page:000 Personal Protection, Issue:01, Page:023

CERAKOTE OVENCURE REFILLS NIC INDUSTRIES, INC.

gunsmith tools supplies

Quick View
$34.99
  (4)
    • Check Price
      • CERAKOTE OVENCURE REFILLS NIC INDUSTRIES, INC.

      • Tough, Durable Coatings For Maximum Protection State-of-the-art, Cerakote™ Firearm Coatings provide a durable, weather- and corrosion-proof, ceramic-based protective finish that resists scratching, chipping, and abrasive cleaning solvents. Hardener and paint chemically bond into an ultra-thin coating that adheres to almost any surface for a clean, professional finish. Apply with your airbrush or HVLP touch-up gun for a smooth finish. Oven Cure Refill allows you to order more paint and hardener only. The refill kits do not come with any graduated cylinder or beaker. Items cannot be shipped to New Zealand or Australia. 1911, Issue:04, Page:00V Big Book Catalog, Issue:68, Page:437 Mini-Catalogs, Issue:05, Page:011

6" X 1/2" X 1/2" CERAMIC STONES BROWNELLS

gunsmith tools supplies

Quick View
$29.99 - $49.99
  (64)
    • Check Price
      • 6" X 1/2" X 1/2" CERAMIC STONES BROWNELLS

      • State-Of-The-Art Stones Combine Fast Metal Removal With Fine FinishCustom made to our specs from premium ceramic. The cutting action is very fast and the resulting surface very smooth. Perfect for all trigger work from burr removal to final finish. Use dry or with water as a lube (no messy oil); soap and water cleanup. Less fragile than Arkansas stones. Sold in two colors, White and Black. Ground sides for sharp, 90° edges and an extremely fine cutting action for polishing and smoothing triggers and sears, like the 1911 Auto, that require an exact 90° interface for best performance. White stones produce a finer cut than Black. Set contains one of each stone. 1911, Issue:11, Page:060 Big Book Catalog, Issue:68, Page:155 Big Book Catalog, Issue:68, Page:481 Mini-Catalogs, Issue:05, Page:008

ROLL PIN STARTER PUNCHES BROWNELLS

gunsmith tools supplies

Quick View
$4.99 - $35.00
  (39)
    • Check Price
      • ROLL PIN STARTER PUNCHES BROWNELLS

      • Start Roll Pins Without DamageStart the removal of roll or spring pins without causing damage to the pins or the punch. Short shaft starter punch gives you more control by putting your hand closer to the pin and keeps you from bending longer finishing roll pin punches. Made from solid steel, with parallel-ground shanks and knurled handles. Big Book Catalog, Issue:68, Page:466 New Product Supplement, Issue:573, Page:006

CONTOUR #3 BARREL SHILEN

gunsmith tools supplies

Quick View
$191.99 - $284.99
  (66)
    • Check Price
      • CONTOUR #3 BARREL SHILEN

      • Contour #3 in Chrome Moly or Stainless Steel All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a gun shoot any straighter than the accuracy capability of the barrel used. And, it is the insides of a barrel, that very small and vital area of lands and grooves over which the gunsmith has no control, that can determine whether the finished work of art is for shooting - or “just for looks”. Craftsmanship . . . not price . . . determines the quality of a barrel. But, by the same token, the customer willing to spend the money for a custom gun is shortsighted indeed, if he starts economizing and orders “just any old barrel so long as it’s cheap”. Furthermore, he is jeopardizing your reputation as a gun builder by making such a request. We, as your supplier, are laying our reputation (and yours, too!) on the line by offering you barrel blanks. They have got to be good or we are in trouble! Big trouble!! We must never sell you anything but that which will enlarge your stature with your trade. And, we feel that the Brownell Barrel, made for us by Ed Shilen, will do just that! Shilen barrels, either chrome moly or Stainless, are rifled with six lands and grooves by the “Cold Forming” process using carbide dies made in Shilen’s own plant under the most rigid controls. This rifling method achieves extremely close inside uniformity from breech to muzzle. Finished barrels are air-gauge inspected (air-gauged sensitivity is .00005" - five-one-hundred-thousandths!) and 6X borescope in- spected. All barrels, .22 through .30 caliber have groove tolerances within .0005" and uniformity within .0003" No straightening is done, and all barrels are completely stress-relieved. All stainless steel barrels are hand lapped at the factory. Only those barrels passing all spec tests are offered to the trade. Any barrel even slightly “suspect” is started through the production process again and bored to a large caliber. In no other way can quality and reputation be maintained. Slightly more expensive to produce - but vastly greater in quality and ultimate performance. Big Book Catalog, Issue:68, Page:177 New Product Supplement, Issue:571, Page:002

UNIVERSAL SIGHT MOUNTING FIXTURE & COMPONENTS FORSTER

gunsmith tools supplies

Quick View
$1.99 - $459.99
  (92)
    • Check Price
      • UNIVERSAL SIGHT MOUNTING FIXTURE & COMPONENTS FORSTER

      • The Accurate, Professional Way To Mount Scopes & SightsThe Foster Scope Mounting Jig fills the exacting requirements of the most particular gunsmith. Will handle virtually all bolt action, lever action and pump guns! You have only to spoil one good gun with a faulty job and you've spent the price of the jig. We have sold a great number of these to gunsmiths during the recent years. The universal comment when we meet scope jig buyers later is "I don't know how I ever did business without it. Would rather almost do without my right arm than lose it now!" The Forster Universal Sight Mounting Fixture was designed to fill the exacting requirements encountered in drilling and tapping holes for the mounting of scope mounts, receiver sights, shotgun beads, etc. The Fixture will handle virtually all bolt action, lever action and pump action guns including the Savage 99, Remington 760, etc.; in fact, any single barrel gun as long as the barrel can be laid into the "V" blocks of the Fixture. Tubular magazine guns are done in the same manner by first removing the magazine tube. The Fixture will locate the holes to a standard, predetermined spacing built into the over-arm, or to any other spacing by sliding the over-arm in either direction. "Run out" of the drill is eliminated as it is guided through a hardened and ground drill bushing. Tapping is done through another bushing of the correct tap size, and eliminates cocking of the tap which is a major cause of tap breakage and sloppy holes. The sliding over-arm has three holes with standard spacing of .500" and .860" between centers into which the interchangeable drill and tap guide-bushings fit. The over-arm is keyed and slides in a "T" slot. It is always in true alignment with the exact center of the gun barrel. The main body of the Fixture is cast aluminum. The two "V" blocks are adjustable for height and made of hardened steel accurately ground on the "V" as well as the shaft. Accuracy in every detail has been the first consideration! It is truly a precision fixture that will save its cost over and over again while allowing you to do a really first class job on every gun that comes into your shop. Big Book Catalog, Issue:68, Page:498 Big Book Catalog, Issue:68, Page:508 Mini-Catalogs, Issue:05, Page:012

AR-15 Upper Receiver Block DPMS

gunsmith tools supplies

Quick View
$40.99 - $64.99
  (91)
    • Check Price
      • AR-15 Upper Receiver Block DPMS

      • Secure Support For Receiver While Fitting PartsMachined from tough, long-wearing nylon to hold upper receiver in a bench vise without fear of crushing, marking or scratching the finish. Fits inside stripped or barreled, carry handle and flattop receivers with .250" diameter pivot pins. Holds receivers at any angle for cleaning, or fitting sights and accessories. Models to fit standard AR-15 and DPMS AR-style .308 receivers. AR-15, Issue:11, Page:085 Big Book Catalog, Issue:68, Page:085 Law Enforcement / Police Store, Issue:02, Page:038 New Product Supplement, Issue:611, Page:016

1911 SEAR JIG ED BROWN

gunsmith tools supplies

Quick View
$49.95
  (65)
    • Check Price
      • 1911 SEAR JIG ED BROWN

      • Sets Critical Sear Angle For 1911 Trigger JobsContoured design fits comfortably in the palm of your hand, holds sear at the correct angle for precise stoning. Adjustable positioning screw lets you make exact sear angle changes to increase or decrease trigger pull weight. Use with 6"x"x" stones to achieve a mirror smooth finish for a clean, crisp letoff. Includes complete instructions and .020" shim. 1911, Issue:11, Page:061 Big Book Catalog, Issue:68, Page:156

79° MUZZLE CROWNING CUTTER BROWNELLS

gunsmith tools supplies

Quick View
$52.99
  (47)
    • Check Price
      • 79° MUZZLE CROWNING CUTTER BROWNELLS

      • Cuts Popular "11\" Target Crown Hardened steel, muzzle crowning tool cuts a slight (11° less than square) target chamfer on barrels. Gives good rifling protection without going too deep. 90° - 11° = 79°, hence the name. Eight, precision-machined flutes give smooth, chatter-free cuts to help eliminate extra lapping or stoning. ¼"-20 thread fits Brownells muzzle chamfering handles. Use with our muzzle pilots to ensure precise alignment with your bore. Available in ½" and ¾" diameters to accommodate most rifle/handgun barrel diameters. Big Book Catalog, Issue:68, Page:496 New Product Supplement, Issue:581, Page:012

GUN PRICE TAGS BROWNELLS

gunsmith tools supplies

Quick View
$12.47 - $49.99
  (78)
    • Check Price
      • GUN PRICE TAGS BROWNELLS

      • Saves You Time-Gives Customer All The Info For you or your employees to remember the price and every detail on every gun in the shop is almost an impossible job. A gun sold at the wrong price or a sale lost because a customer's questions went unanswered is money out of your pocket. These Gun Price Tags were designed with the help of gunsmiths like you to stop those problems. They let your customer (and sales people) make "apples-to-apples" comparisons and then select the gun that suits their needs best. There are 11 pre-printed headings for: Stock No.; Serial No.; Brand Name; Model; Bore Diameter; Barrel Length; Action Type; Caliber/Gauge; "Other" info; a blank line; a Retail Price line and a blank space. 3 Different colors give instant identification; lets you create your own color-coded system for new and used, or consignment guns. Big Book Catalog, Issue:68, Page:527

RIMLESS RIFLE/SHOTGUN CARTRIDGE HEADSPACE GAUGES MANSON PRECISION

gunsmith tools supplies

Quick View
$30.00 - $60.00
  (3)
    • Check Price
      • RIMLESS RIFLE/SHOTGUN CARTRIDGE HEADSPACE GAUGES MANSON PRECISION

      • Determine Correct Headspace Gives the proper chamber headspace dimensions so you know a firearm is safe to fire. GO gauge gives the SAMMI-recommended, minimum chamber depth. NO/GO is slightly longer than the SAMMI-recommended to identify excessive chamber depth and an unsafe condition. Precision-ground and hardened to provide long service life. MIXING AND MATCHING BRANDS OF HEADSPACE GAUGES - Don't do it!! That's the short answer, here's why. It boils down to tolerance stacking. Each Headspace Gauge manufacturer works within a range specified by SAAMI. Manufacturer "A" may work at the high end of the range while Manufacturer "B's" gauges are in the middle of the tolerance range. Mixing the two could give an inaccurate reading. By sticking with one brand within a particular caliber, you will eliminate a variable. If you have a Forster, .308 GO gauge, get a Forster, .308 NO GO. Use Clymer with Clymer and Manson Precision with Manson Precision, etc. You can use any brand of headspace gauge with any other brand of chambering reamer. e.g. Forster Headspace Gauges with Clymer Reamers, Manson Precision Gauges with JGS Reamers, etc. AR-15, Issue:11, Page:087 Big Book Catalog, Issue:68, Page:088 Big Book Catalog, Issue:68, Page:494 New Product Supplement, Issue:611, Page:017

TEFLON/MOLY OVEN CURE, GUN FINISH BROWNELLS

gunsmith tools supplies

Quick View
$32.99
  (8)
    • Check Price
      • TEFLON/MOLY OVEN CURE, GUN FINISH BROWNELLS

      • The Next Generation Of Durable, Spray-On, Professional Gun Finishes Now you can apply a great-looking coating with the increased durability and friction-fighting properties of Teflon® fluoropolymer resin and molybdenum disulfide to any firearm or metal part in as little as 2 hours. This is not just another spray paint. Brownells Teflon/Moly Gun Finish is an ultra-modern, thermo-set, spray-on, self-lubricating coating, chemically bonded to a phenolic-epoxy base so it’s highly resistant to scratches and abrasion. Because the finish is baked on, you get some extra benefits. As the metal heats, its pores open allowing the Teflon component to penetrate. On high-wear areas, like slide rails, the coating will eventually wear away but the Teflon will still be in the pores, lubricating and protecting. Plus, dense colors won’t lighten, dissolve or break down under all common gun solvents. One application makes any properly prepared metal almost impervious to oxidation. The convenient aerosol can, with its versatile cone-shaped spray, is so easy to use it’s almost mistake-proof. Just degrease and abrasive-blast the part; pre-heat the part ’til it’s warm to the touch, then spray Brownells Teflon/Moly Gun Finish and let dry. In about 15 minutes, bake in a regular kitchen oven at 350° F. for 30 minutes. As soon as the part cools, it’s completely protected from rust and ready for final assembly. Perfect for restoring military rifles and parts; coating hard-to-blue, stainless steel or aluminum parts; refurbishing hunting guns and self-defense weapons, or refinishing any piece of metal that needs a durable, self-lubricating, rust-proof coating that lasts and will look great for years to come. Great “hiding” ability makes it a natural for quickly redoing those dinged and pitted working guns (after you get the rust out of the pits, of course). Use as a one-coat finish, or spray on several fine, thin coats and then bake. Extremely economical, one can will fully coat up to two long guns or four handguns! Brownells Guntechs recommend use of 084-179-004 All Purpose Clean Out Nozzle prior to attempting to spray this product. 1911, Issue:04, Page:061 AR-15, Issue:04, Page:077 Big Book Catalog, Issue:68, Page:435 Law Enforcement / Police Store, Issue:02, Page:034 Mini-Catalogs, Issue:05, Page:010 New Product Supplement, Issue:581, Page:015

"PERFECT CUT" PREMIUM TAP REIFF & NESTOR COMPANY

gunsmith tools supplies

Quick View
$7.99 - $25.99
  (97)
    • Check Price
      • "PERFECT CUT" PREMIUM TAP REIFF & NESTOR COMPANY

      • Incredibly Smooth Cutting-Greatly Increased LifeNot magic, just perfect! When we first tried these taps (recommended by customer Dan Baldwin), we thought they were extra hard, coated or treated somehow . . . they're that much better than any tap we've ever used before. But, the U.S. company that's been making them since 1912 says the secret is plain old care and quality control. The ground threads are held to incredibly tight tolerances for roundness, thread spacing, etc. Result is, all the teeth cut equally so the whole tapping process goes faster, the taps last longer, breakage is cut way down and the threads are the finest you'll ever see. Try them; you'll tap more holes per tap than you thought possible! Premium Three-Flute Taps - Divides the tapping stresses over a triangular area, making it easy to start and to keep straight when tapping by hand. Stronger than two-flute taps, so preferable for hard or tough steels. Premium Two-Flute Taps - Spreads the tapping stress over two large flutes, with more chip space than three-flute taps a real help when tapping soft steels. A popular machine tap, great when hand turned, too. Big Book Catalog, Issue:68, Page:486

LASER BORESIGHTER SITE-LITE

gunsmith tools supplies

Quick View
$25.95 - $249.99
  (51)
    • Check Price
      • LASER BORESIGHTER SITE-LITE

      • Gets You Close To Point Of Aim Without Firing A ShotSaves range time and ammo; highly accurate laser system lets you zero your scope to point-of-aim at 100 yards, before you go to the range. Quick and easy to use, just place the special laser target 25 feet away and aim the laser at it, then adjust the scope till the crosshairs align with the target. Works equally well with red dot scopes and iron sights. Laser is mounted to a cone shaped, aluminum spud. An O-ring and a powerful magnet hold the spud centered in the bore. No special adapters to buy and no metal contacts the rifling. A system of adapters and O-rings lets one unit fit all firearms from .22 to .50 caliber, plus 12 and 20 gauge shotguns. Also includes the SRL-100 adapter that slips over the Boresighter's lens to convert it into a highly accurate Scope Reticle Leveler by refocusing the laser to a horizontal beam for precise crosshair alignment. SRL-100 also available separately. SL-100 Standard Model for use indoors, where you have control over ambient lighting. SL-150 Ultra-Mag has an ultra-bright 635mm laser for better visibility in bright, ambient light conditions. SL-500 Ultra-Mag uses a super-bright green laser for maximum visibility of the sighting dot in daylight and very bright ambient light.Must ship UPS Ground. Brownells Christmas , Issue:5X, Page:023 Big Book Catalog, Issue:68, Page:500 Law Enforcement / Police Store, Issue:07, Page:050 New Product Supplement, Issue:593, Page:017

LASER BORESIGHTER SIGHTMARK

gunsmith tools supplies

Quick View
$30.00 - $39.99
  (70)
    • Check Price
      • LASER BORESIGHTER SIGHTMARK

      • Chamber-Mounted Laser Helps You Sight In Rifle Or Pistol Without Firing A Shot Easy-to-use, self-contained boresighting system fits in the chamber of your rifle or pistol and projects a powerful red laser beam aligned with the bore axis for sighting to the point-of-aim without firing a shot. Works with scopes, holographic red dot sights, and “iron” sights. Durable, machined brass housing looks like a cartridge case but actually contains the entire laser system and batteries. Insert the batteries and screw the cap on the housing to turn on the laser; remove the batteries to turn off. Insert the entire assembly into the chamber, gently close the action, and aim at a target 20-30 yards away. Adjust windage and elevation of the scope or sights so point-of-aim is zeroed on the dot, compensating for sight offset to prevent gun from shooting high. Go to the range for test shots and final sight adjustments. Store boresighter in the included nylon carrying case that fits easily in a pocket, tool kit, or range bag. Available in a variety of calibers, listed below. Big Book Catalog, Issue:68, Page:500 Mini-Catalogs, Issue:05, Page:012

FAT WRENCH WHEELER ENGINEERING

gunsmith tools supplies

Quick View
$54.99
  (61)
    • Check Price
      • FAT WRENCH WHEELER ENGINEERING

      • FAT Wrench w/10 Bit Set:  Wheeler's FAT Wrench brings perfect consistency to every screw on your rifle!  This amazing handheld torque wrench lets you apply repeatable, accurate torque settings to scope rings, guard screws and other screws, which aids in accuracy and decreases the opportunity for problems in the field.  The FATWrench is a perfect compliment to the Deluxe Gunsmithing Screwdriver Sets. Together, they can ensure accurate tightening of most every screw on any gun in your collection.  Torque adjustments range from 10 inch pounds to 65 inch pounds  Accuracy plus/minus 2 inch pounds  1/4" drive  Plastic Case Included Included bits: Leupold/Buehler windage bit #10 flat blade bit #11 flat blade bit #32 flat blade bit 3/32" Allen bit 7/64" Allen bit 5/32" Allen bit T15 Torx bit T20 Torx bit Square drive adapter bit   Big Book Catalog, Issue:68, Page:476

AR-15/ 308 AR 80% LOWER UNIVERSAL JIG & TOOLS MODULUS ARMS

gunsmith tools supplies

Quick View
$29.99 - $199.99
  (67)
    • Check Price
      • AR-15/ 308 AR 80% LOWER UNIVERSAL JIG & TOOLS MODULUS ARMS

      • Universal Compatibility: Use of standardized AR-15 or AR-308 / AR-10 upper dimensions to locate and center the jig template results in universal compatibility and more accurate machining. Safer and Faster: The Modulus Arms AR-15 AR-308 / AR-10 Jig accommodates the use of a router, for safer and faster machining, limiting the use of traditional handheld drills to remove material. More Accurate: The drill bit depth gauges included with every Modulus Arms AR-15 or AR-308 / AR-10 Jig take the guess work out of drilling into your lower receiver, minimizing the opportunity for mistakes. Jig fabrication Tool Kit for the Modulus Arms AR-15 and AR-308 / AR-10 Universal Jigs includes all of the necessary drill bits, drill stop, and end mill bit for fabricating your lower receiver with the Modulus Arms AR-15 or AR-308 / AR-10 jigs. Solid Carbide End Mill is custom designed to work with the Modulus Arms Jigs. The Solid Carbide End Mill is for the Modulus Arms AR-15 and AR-308 / AR-10 Universal Jigs. It is used for fabricating your lower receiver. The Solid Carbide End Mill is custom designed to work with the Modulus Arms Jigs.  

AR-15/M16 SIGHT WRENCHES BROWNELLS

gunsmith tools supplies

Quick View
$9.99
  (67)
    • Check Price
      • AR-15/M16 SIGHT WRENCHES BROWNELLS

      • Models For A1 & A2 Make Sight Adjusting Quick & Easy Even tho' you're supposed to be able to adjust these sights with nothing more than a round of ammo, folks who've tried know it's just not that simple. This decidedly handy little Sight Wrench does the job, quick and easy. AR-15, Issue:11, Page:082 AR-15, Issue:11, Page:083 AR-15, Issue:11, Page:085 Big Book Catalog, Issue:68, Page:082 Big Book Catalog, Issue:68, Page:083 Big Book Catalog, Issue:68, Page:085 Law Enforcement / Police Store, Issue:13, Page:021

SHOTGUN BARREL POLISHING FLEX HONE® BROWNELLS

gunsmith tools supplies

Quick View
$0.00 - $169.99
  (80)
    • Check Price
      • SHOTGUN BARREL POLISHING FLEX HONE® BROWNELLS

      • Puts Finish Polish On Shotgun Bores That Is Truly Outstanding Hundreds of abrasive "balls" mounted on a flexible shaft - the fastest, easiest way we've come across to clean and polish older barrels or put a mirror polish in new ones. For used barrels, the Medium-Coarse hone, followed by the Fine, removes rough and tight spots and brings the bore to a bright finish that you can see and feel . . . just run a patch through it before and after; the difference is amazing! We found too, that we could feel tight spots during honing and spend extra time on them until they were evened out. On new barrels, the Fine hone by itself will bring the factory finish up to a beautiful, mirror-bright finish that's a real customer pleaser. Easy to use: chuck in a variable speed electric drill; wet the hone with Flex Hone® oil; start the drill and insert the hone into the barrel from the breech end (if possible). As it cuts, a slurry of abrasive and oil develops to help speed the cutting action. Flex Hone® available (shown below) in sets and individual hones for 10, 12, 16 and 20 gauge barrels as well as .410 bore. Also, special-sized hones for 10, 12, 16, 20 gauge chambers and .410 bore. Instructions walk you through the steps for a perfect job. (You MUST use Flex Hone® oil - all other oils will destroy the abrasive "balls" and void our guarantee!) 750 RPM MAX. Avoid excess pressure. View Flex-Hone PDF Here Big Book Catalog, Issue:68, Page:514 New Product Supplement, Issue:581, Page:013