Categories


ATOMIZED METALS BROWNELLS

gunsmith tools supplies

Quick View
$14.99 - $24.99
 
    • View
      • ATOMIZED METALS BROWNELLS

      • Increase Tensile and Compression Strength of Acraglas GelAtomized (finely powdered) metals can be added to Acraglas Gel to increase both tensile and compression strength, along with higher impact resistance. This feature allows you to duplex-bed guns using reinforced Acraglas Gel where the recoil lug contacts the bedding and un-reinforced Acraglas Gel or Acraglas for the less stressed areas of the stock. Atomized metals can be added in ratios from 1 part metal to 4 parts mixed bedding , up to 1:1 ratio of metal to bedding mix. We offer five atomized metals: ALUMINUM - Very malleable with ­excellent machinability for easy drilling, tapping, shaping; STEEL - Offers a full 10% increase in tensile and compression strength over un-reinforced bedding; requires metal working tools for trimming and shaping and is heavier than aluminum; STAINLESS STEEL - All the attributes of steel particles but with a medium gray finish and no fear of rust formation on surface of bedding.

        AR-15, Issue:04, Page:075 Big Book Catalog, Issue:68, Page:434 Big Book Catalog, Issue:68, Page:452 Mini-Catalogs, Issue:05, Page:013

.146X48 SCOPE BASE SHOP KIT BROWNELLS

gunsmith tools supplies

Quick View
$6.99 - $67.99
 
    • View
      • .146X48 SCOPE BASE SHOP KIT BROWNELLS

      • Saves Your "Tail Feathers" If A Hole Gets StrippedSlightly larger in diameter than the common 6-48 scope base mounting screw. Most holes "ruined" while drilling or tapping can be fixed; just retap to .146"-48 and install. No need to redrill base or gun. Thanks to Doug Knowt for his tip. Big Book Catalog, Issue:68, Page:414

HARD FIT CURL SCRAPERS BROWNELLS

gunsmith tools supplies

Quick View
$25.99 - $129.99
 
    • View
      • HARD FIT CURL SCRAPERS BROWNELLS

      • For That Final, "Like It Grew There" FitMade to remove the tiniest possible curl of wood to get that exact fit that separates "Pros" from "duds". Handles are placed at right angles to the cutting edge; you get complete control of the edge and almost no tendency to follow wood grain, gouge or dig in. Made of best quality tempered tool steel, with enough heft to eliminate any "flexing". Shaped for positive fingertip control of blade thru full stroke. Finger clearance under the handle for tight places. Available in 2 styles - 3 blade widths. Sizes small enough for trigger hole; big enough for barrel channel. Flat ones perfect for fitting floor plates, tangs, magazines. Not intended to rough out barrel channel, so don't bear down. Just draw toward you across work. Makes the most beautiful curls and dust; yet won't work-harden wood as do rasps, or leave grit to ruin tool edges as does sandpaper. Without a doubt, the best tool ever designed for the fine, controlled removal of the inletting black and that "whisker" of wood underneath! Big Book Catalog, Issue:68, Page:449

BOLT CATCH PIN PUNCH BROWNELLS

gunsmith tools supplies

Quick View
$17.99
  (27)
    • Check Price
      • BOLT CATCH PIN PUNCH BROWNELLS

      • Specially made, slab-sided punch clears left side of the magazine well allowing bolt catch pivot pin to be removed by driving it to the rear. AR-15, Issue:11, Page:082 AR-15, Issue:11, Page:083 Brownells Christmas , Issue:2X, Page:019 Big Book Catalog, Issue:68, Page:082 Big Book Catalog, Issue:68, Page:083

AMMO SNAP CAP DUMMY ROUNDS A-ZOOM

gunsmith tools supplies

Quick View
$6.99 - $20.49
  (13)
    • Check Price
      • AMMO SNAP CAP DUMMY ROUNDS A-ZOOM

      • Practice Loading, Unloading, Dry Firing Machined, aluminum body with synthetic, cushion primer withstands repeated cycling. Shaped like loaded rounds for correct loading and feeding. Improves shooting skill, gun handling. Handgun shooters can practice reloading, and trigger squeeze. Competitive shooters and hunters can improve rifle handling proficiency. Big Book Catalog, Issue:68, Page:405 Cowboy Action, Issue:03, Page:039 Law Enforcement / Police Store, Issue:08, Page:049 New Product Supplement, Issue:581, Page:011 New Product Supplement, Issue:581, Page:016 Sinclair, Issue:5B, Page:221

AR-15/M16 BARREL EXTENSION TORQUE TOOLS BROWNELLS

gunsmith tools supplies

Quick View
$69.99
  (48)
    • Check Price
      • AR-15/M16 BARREL EXTENSION TORQUE TOOLS BROWNELLS

      • Aids Fast, Easy Barrel Installation; Protects Barrel Nut & Receiver From Damage Handy tool aids in applying straight-line torque for fast, easy installation of the barrel nut without scratching the exterior of the upper receiver. Helps ensure the right amount of torque is evenly applied, while maintaining proper alignment of the barrel, upper receiver, and gas tube ports. Use with any barrel nut wrench or free-float tube wrench and a torque wrench with a ½" square drive. Simply clamp the barrel nut wrench handle firmly in a bench vise, insert the barrel into the upper receiver, and finger tighten the barrel nut. Slide the barrel through the wrench, insert the Torque Tool in the back of the receiver until the teeth lock into the locking lugs in the barrel extension, and apply torque with the torque drive through the Tool to tighten the barrel nut. Precision machined from heavy-duty steel bar stock for years of reliable service. Available for the AR-15/M16. AR-15, Issue:11, Page:084 Big Book Catalog, Issue:68, Page:084 New Product Supplement, Issue:621, Page:015

BORECAM DIGITAL BORESCOPE LYMAN

gunsmith tools supplies

Quick View
$259.99
  (93)
    • Check Price
      • BORECAM DIGITAL BORESCOPE LYMAN

      • Lyman's new Borescope provides active shooters with the means to carefully inspect the bores of their firearms for wear, throat erosion, tool marks, and other rifling or chamber damage, as well as for checking for fouling. The scope will fit 20 caliber and larger barrels and works with miniature camera technology. The display will show a clear image of the inside of the barrel and also allows you to take a photo of the bore. The image will be stored on a standard SD card and can later be viewed on a computer or laptop.

AR-15 ARMORER'S KIT BROWNELLS

gunsmith tools supplies

Quick View
$349.99 - $1,499.99
  (87)
    • Check Price
      • AR-15 ARMORER'S KIT BROWNELLS

      • Complete Tool Kits To Service & Repair Military & Civilian AR-15/M16 Rifles & M4 Carbines The RIGHT way to repair and service the AR-15/M16/M4! These kits contain the tools the gunsmith or armorer needs to perform full maintenance and repairs of these rifles in the field or shop. Each tool is designed to do its job in the simplest, most effective manner to maintain and repair these guns correctly – and save time doing it. Standard Kit contains the tools needed to work on the AR-15 and the M16A1 through A4. Premium Kit contains all the tools of the Standard Kit, plus an additional 11 items necessary to repair and maintain the M4 carbine as well. Both kits come in a custom-fitted, hard-side tool box that’s made from nearly indestructible molded polymer resin and meets mil-spec MIL-C-4150 and ATA specifications. The Standard kit’s foam inserts are pre-cut with spaces for the M4 tools, so you can turn it into a Premium Kit anytime simply by adding the Upgrade Kit. View all items included in this kit. AR-15, Issue:11, Page:082 Big Book Catalog, Issue:68, Page:082 Law Enforcement / Police Store, Issue:13, Page:022 New Product Supplement, Issue:593, Page:016

AR-15/M15 CAT TOOL CAT OUTDOORS

gunsmith tools supplies

Quick View
$34.00
  (13)
    • Check Price
      • AR-15/M15 CAT TOOL CAT OUTDOORS

      • Compact, Multi-Tool Helps Keep Bolt/Carrier Group Functioning Smoothly Compact, easy to carry pocket tool performs four separate cleaning functions to help you quickly restore the critical bolt/carrier tolerances that can be compromised by carbon buildup after prolonged shooting. Use as a bolt scraper, firing pin cleaner, patch holder for swabbing the bolt recess, and scraper for removing carbon in the carrier. Plus, the center of the tool is equipped with a ¼" hex head recess to use as a driver. Carry a few ¼" driver bits, and you’re all set to make adjustments that keep your rifle tuned and shooting. AR-15, Issue:11, Page:080 Brownells Christmas , Issue:2X, Page:019 Big Book Catalog, Issue:68, Page:080 Mini-Catalogs, Issue:05, Page:006

BAKE-ON FINISH CURING OVEN BROWNELLS

gunsmith tools supplies

Quick View
$2,099.99
  (37)
    • Check Price
      • BAKE-ON FINISH CURING OVEN BROWNELLS

      • Provides A Tough-As-Nails, Oven-Baked FinishOur high efficiency oven is custom engineered to ensure uniform and complete part curing while delivering a “tough-as-nails” baked-on finish when using Brownells Gun-Kote or Teflon®/Moly oven cure finishes. Advanced technology combines two separate heating elements with a high-tech interior surface to optimize airflow and ensure consistent temperatures that help prevent hot spots, surface blemishes, and discolorations. Thermostat adjustable from 100° F to 400° F for precise temperature control during large or small production runs. Adjustable, 60 minute countdown timer turns oven on when set; audible bell alerts you when time is up, and oven turns off. Separate “constant on” position works like a manual override to bypass the timer and allow oven run-times longer than 60 minutes. Front mounted temperature gauge provides accurate, real-time temperature monitoring. Oven panels are insulated with over 5 lbs. of high density, energy-saving fiberglass to prevent heat loss and reduce operating costs. Four, removable drying racks allow you to optimize interior space and maintain full capacity. Two ceiling mounts, with five holes each, allow you to hang parts up to 42" long. Extra long power cord for easy setup in a variety of locations, plus a panel-mounted electrical fuse for fail-safe, overload protection. High-temp, matte black surface finish is corrosion resistant. Holds up to five barreled rifle actions, plus numerous handguns and small parts. Big Book Catalog, Issue:68, Page:436 New Product Supplement, Issue:621, Page:016

HEADSPACE GAUGES - GO CLYMER

gunsmith tools supplies

Quick View
$29.00 - $45.00
  (91)
    • Check Price
      • HEADSPACE GAUGES - GO CLYMER

      • Absolutely Essential For Accurate, Safe, Chamber Work The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with “Go” or “No-Go” and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs. AR-15, Issue:11, Page:087 Big Book Catalog, Issue:68, Page:088 Big Book Catalog, Issue:68, Page:495 Law Enforcement / Police Store, Issue:08, Page:054 New Product Supplement, Issue:611, Page:017

ROLL PIN PUNCHES GRACE USA

gunsmith tools supplies

Quick View
$5.99 - $32.99
  (58)
    • Check Price
      • ROLL PIN PUNCHES GRACE USA

      • Prevents Damage To Pin EndsHardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Brownells Christmas , Issue:2X, Page:019 Big Book Catalog, Issue:68, Page:466 New Product Supplement, Issue:631, Page:021 Sinclair, Issue:5B, Page:244

CERAKOTE OVENCURE CERAMIC COATINGS NIC INDUSTRIES, INC.

gunsmith tools supplies

Quick View
$46.99 - $101.99
  (35)
    • Check Price
      • CERAKOTE OVENCURE CERAMIC COATINGS NIC INDUSTRIES, INC.

      • Tough, Durable Coatings For Maximum Protection State-of-the-art, Cerakote™ Firearm Coatings provide a durable, weather- and corrosion-proof, ceramic-based protective finish that resists scratching, chipping, and abrasive cleaning solvents. Hardener and paint chemically bond into an ultra-thin coating that adheres to almost any surface for a clean, professional finish. Apply with an airbrush or HVLP touch-up gun for a smooth finish. Oven Cure Kit requires oven baking for 2 hours at 250° for optimal cure or 1 hour at 300° for quick cure. For heat-sensitive materials such as plastics, a 2 hour cure at 200° is adequate.   Items cannot be shipped to New Zealand or Australia. 1911, Issue:04, Page:00V Big Book Catalog, Issue:68, Page:437 Law Enforcement / Police Store, Issue:07, Page:054 Mini-Catalogs, Issue:05, Page:011 New Product Supplement, Issue:611, Page:018 Personal Protection, Issue:01, Page:017

ELECTRONIC TRIGGER PULL GAUGE LYMAN

gunsmith tools supplies

Quick View
$67.99
  (79)
    • Check Price
      • ELECTRONIC TRIGGER PULL GAUGE LYMAN

      • State-Of-The-Art Technology Gives Fast & Accurate ReadingsNo weights or sliding pointers to worry about, just place the hook on the trigger and pull. The large, easy to read LCD quickly displays the results. Strain gauge technology provides accuracy to 1/10 of an ounce from 1 oz. to 5 pounds and to " oz. from 5 to 12 pounds. Lets you take up to ten readings and display the average. Displays either English or Metric format. AR-15, Issue:11, Page:088 Big Book Catalog, Issue:68, Page:089 Big Book Catalog, Issue:68, Page:489 Cowboy Action, Issue:03, Page:029 Law Enforcement / Police Store, Issue:05, Page:051 New Product Supplement, Issue:542, Page:000 Personal Protection, Issue:01, Page:051 Sinclair, Issue:5B, Page:256

BLUING SYSTEM KIT BROWNELLS

gunsmith tools supplies

Quick View
$2,249.99 - $2,299.99
  (65)
    • Check Price
      • BLUING SYSTEM KIT BROWNELLS

      • 41-Piece Kit Gives You Everything You Need To Start Bluing Now! "What Do I Need To Start Hot Salts Bluing Of Guns?" Having answered this question literally hundreds of times over the past 55+ years, we've put everything you need in this one complete KIT. EVERYTHING! All the basics - Tanks, Stands, Burners, Cleaners, Salts and Oil that the "other guys" sell - PLUS everything else you need to start bluing guns. Solvents, tank covers, personal safety gear, extra additives and lots more. All for just a few dollars more than those "bare bones" kits. Plus, we include our step-by-step Bluing Instruction Book. 34 pages of the best bluing information available in the Firearms Industry…perfected over the years, helping literally thousands of gunsmiths. They teach you how to blue, and if you have a problem, they explain how to cure it. Unlike others, we back our process with our industry-exclusive, full-time Tech Support Staff of "hands-on" experienced gunsmiths who can help you solve any bluing problem. At Brownells, we're committed to giving you, the working gunsmith, the finest possible service. We guarantee it 100%. We know you'll find Bluing a rewarding, profitable addition to your shop. Compare our KIT to anybody else's…it is the best buy on the market. So, save yourself time and money trying to make a basic "bare bones" package into a working bluing shop. Order our Bluing System Kit and put that time to work making money bluing guns. Listed below are all the items in the KIT with a brief description of each. Check and compare this to any other kit on the market. And remember, we've got the best Instructions; the ONLY, fulltime Tech Support Staff; 60+ years experience and an Unconditional, Money-Back Guarantee. Note: Requires additional shipping & hazardous materials surcharge. Must be shipped by Truck or picked up. Big Book Catalog, Issue:68, Page:428 Mini-Catalogs, Issue:05, Page:010

ACRA-RELEASE™ BROWNELLS

gunsmith tools supplies

Quick View
$32.99
  (87)
    • Check Price
      • ACRA-RELEASE™ BROWNELLS

      • Easy-To-Use, Positive Release Agent For All "Acra" Products (The One We Use!!)According to famed stockmaker Bill McGuire of Wenatchee, Wash., "I can honestly say it (ACRA-RELEASE™) is the best and cleanest release I have ever used". Specially formulated to apply easily, yet gives sure, positive release for all "Acra" products in all types of bedding under varying conditions. (You still have to cover all surfaces with it!!) Ideal for irregular shapes. Cuts cleanup time. Recoats missed areas easily. Will not affect fit/tolerances. Clear, but stays "oily" so you can both see and feel the coverage. Wipes off metal and cured epoxy with 1,1,1 Trichloroethane. Works great with all our epoxies: Acraglas ®, Acraglas Gel®, Steel Bed™, Acra-Weld™, ACRA-QUICK™, and most others!Cannot ship outside Continental United States. Ship UPS Ground only within U.S. Brownells Christmas , Issue:4X, Page:016 Big Book Catalog, Issue:68, Page:451 Mini-Catalogs, Issue:05, Page:013 New Product Supplement, Issue:581, Page:011

BARREL VISE BROWNELLS

gunsmith tools supplies

Quick View
$119.99 - $315.95
  (70)
    • Check Price
      • BARREL VISE BROWNELLS

      • Extra Surface Area Gives Tremendous Power To Clamp Hold & Even The Tightest BarrelTo complement our “Ring-Of-Steel” Action Wrench System, we’ve developed the only professional-quality Barrel Vise that will positively clamp and keep even the tightest barrel from turning during removal. Machined from solid steel for durability to service the barrel installation and removal needs of any gunsmith for years and years. Our exclusive four bolt system and extra-wide design generates so much holding force, the Brownells Barrel Vise must be firmly bolted to the stoutest bench or an immovable base to realize its full ­potential. Split barrel bushings come in a variety of sizes to fit many popular barrels (and some not-so-common ones) to make this universal Barrel Vise system the very first choice of ­professional gunsmiths. Steel Bushings provide years of service and have the necessary clamping power to break loose the tightest barrels. Aluminum Bushings also give a strong hold without risk of marring your barrel. Big Book Catalog, Issue:68, Page:492 Mini-Catalogs, Issue:15, Page:007 Mini-Catalogs, Issue:15, Page:015 New Product Supplement, Issue:566, Page:006

AR-15 BEV BLOCK MAGPUL

gunsmith tools supplies

Quick View
$47.95
  (59)
    • Check Price
      • AR-15 BEV BLOCK MAGPUL

      • The BEV Block (Barrel Extension Vise) is an all-in-one, compact vise block tool for AR assembly operations of barrel nuts, flash hiders, etc. Mounts securely in a vise and provides support for both billet and forged upper receivers.  Engages barrel extension with solid steel lugs and full length support shank to prevent flexing. Steel hardness is optimized for durability yet won't damage barrel extension, and Magpul Polymer is used for all other engagement surfaces to protect aluminum receiver.  O-ring post uses bolt carrier for additional stability adn included pin keeps upper in proper position. The BEV can also be turned over and used as a mag well vise block to support the lower receiver during maintenance. AR-15, Issue:11, Page:085 Big Book Catalog, Issue:68, Page:085 Mini-Catalogs, Issue:13, Page:005

MAGNA-TIP® PROFESSIONAL SUPER SET BROWNELLS

gunsmith tools supplies

Quick View
$249.99 - $419.99
  (66)
    • Check Price
      • MAGNA-TIP® PROFESSIONAL SUPER SET BROWNELLS

      • Brownells is proud to introduce the ultimate Magna-Tip screwdriver set for the professional gunsmith or serious hobbyist. The Professional Super Set contains 120 Magna-Tip bits—the largest selection we’ve ever offered in a Magna-Tip set. Custom grinding bits for a proper fit, or having to put a crucial project on hold while you wait for a specialty screwdriver to arrive are worries of the past, because you’ll always have at your fingertips the correct bit for almost any gun screw. Proper-fitting bits prevent damage to screw slots, so when you’re done the screws are in pristine condition—a sure sign of truly professional gunsmithing work. Made from the same hardened steel used in high-speed industrial impact drivers, these bits are hollow-ground for a no-slip seat in the screw slot, and are precision-balanced to transmit maximum torque smoothly and evenly to the screw. The set includes 75 straight, 4 Phillips, 17 hex (Allen), 11 Torx®, and 13 specialty bits for sights, scope mounts, grip bushings, Ruger ejectors, and other unique applications, plus the handy Magna-Tip Choke Tube Wrench and a hex-to-square adapter that lets you use your Magna-Tip handles to drive ¼" drive sockets. The kit’s seven driver handles ensure you have the handle best suited to any situation. You get the full-size #81 Handle, #84 Hollow Handle, magnetic Law Enforcement Handle, Law Enforcement Hollow Handle, Compact Law Enforcement Handle, the popular Stubby, and our Magna-Tip Ratchet Handle. The heavy duty, three-way Ratchet Handle provides extra leverage for maximum torque transfer to tighten or loosen stubborn screws. The set is also available with all of the above items, including the Ratchet Handle, plus our Adjustable Torque Handle. The Torque Handle ensures you apply the exact amount of required torque in 1 in-lb. increments from 10 to 70 in-lb. to eliminate guesswork and prevent over-or under-tightening critical screws. Both versions of the set come with a sturdy benchtop storage block to organize and store all the bits and handles; a hard-side plastic carry case is supplied with Torque Handle. The Professional Super Set is truly the most versatile screwdriver system you’ll ever use—and quite possibly the last one you’ll ever have to buy! Big Book Catalog, Issue:68, Page:471 Law Enforcement / Police Store, Issue:09, Page:108 Mini-Catalogs, Issue:05, Page:004

GUNSMITH KINKS® BROWNELLS

gunsmith tools supplies

Quick View
$29.99 - $114.99
  (34)
    • Check Price
      • GUNSMITH KINKS® BROWNELLS

      • Written By 600 Men Who Know - Men Who Do ... An Endless Fountain of Knowledge Covering Firearm CareSo fascinating that if you like guns at all you will be unable to lay it down - so valuable that if you think only about guns, you might consider becoming a bachelor again before parting with it! NOTHING LIKE GUNSMITH KINKS HAS EVER BEEN DONE BEFORE - NOR CAN IT BE DUPLICATED Between its covers are the jewels and gems, the intimate trade secrets of the country's leading full-and part-time gunsmiths, writers and basic authorities - proving that no one man can know all the answers - written in the language of the gun shop - so "gunsmithy" it even smells of bore cleaner. Collected and squirreled away by Bob Brownell during 30 years association with the nations best! Edited by Frank Brownell. Published by popular demand of the professional gunsmith trade for their own in-shop use. FOR THE HUNTER - it is worth its weight in gold - just one of the many in-field "Service Kinks®" by someone who has already solved the problem could save your hunt! FOR THE TARGET SHOOTER - Any of the numerous accuracy gimmicks by the men who build the winners could bring those extra points for you when the chips are down. FOR THE HOBBYIST - A Mother Lode of ideas and suggestions 100 men couldn't live long enough to develop. You will revel in the many ways to handle those touchy jobs that can cost you hours of work or a ruined gun if you don't know the answer. FOR THE MILLIONS OF GUN BUFFS Here is how the gunsmiths do those wondrous jobs. Knowing is understanding and appreciating their great skill and unbelievable ingenuity. More than ever, you will wonder how they can do it so beautifully without charging more! A Book you will truly treasure! Especially written, detailed, illustrated "how-to" articles in such special fields as . . . The Art of the Master Metal Polisher ... Basics of Engraving ... Rust and Chemical Bluing ... Tool Sharpening by the Masters ... Barrel Turning and Chambering ... Regular and Electric Checkering ... Stock Designs, plus many, many more. 317 Detailed photographs, blueprints and drawings - 504 pages with 609 separate subject headings. Deluxe, heavy-duty, hard cover, sewn binding. Buckram-linen cover. 1268 entry Cross Index! Plus, all the jokes the gunsmiths have laughed at over the years. Recipes for foods that have tickled their gullets, and cartoons that have tickled their bellies! Quantity prices available. Please call or write. Brownells Christmas , Issue:3X, Page:007 Big Book Catalog, Issue:68, Page:363 Mini-Catalogs, Issue:05, Page:015 New Product Supplement, Issue:581, Page:018

CONTOUR #4 BARREL...BY SHILEN SHILEN

gunsmith tools supplies

Quick View
$191.99 - $350.00
  (3)
    • Check Price
      • CONTOUR #4 BARREL...BY SHILEN SHILEN

      • Contour #4 in Chrome Moly or Stainless Steel All the loving care of the best stockmaker and the meticulous attention to detail of the master machinist will not make a gun shoot any straighter than the accuracy capability of the barrel used. And, it is the insides of a barrel, that very small and vital area of lands and grooves over which the gunsmith has no control, that can determine whether the finished work of art is for shooting - or “just for looks”. Craftsmanship . . . not price . . . determines the quality of a barrel. But, by the same token, the customer willing to spend the money for a custom gun is shortsighted indeed, if he starts economizing and orders “just any old barrel so long as it’s cheap”. Furthermore, he is jeopardizing your reputation as a gun builder by making such a request. We, as your supplier, are laying our reputation (and yours, too!) on the line by offering you barrel blanks. They have got to be good or we are in trouble! Big trouble!! We must never sell you anything but that which will enlarge your stature with your trade. And, we feel that the Brownell Barrel, made for us by Ed Shilen, will do just that! Shilen barrels, either chrome moly or Stainless, are rifled with six lands and grooves by the “Cold Forming” process using carbide dies made in Shilen’s own plant under the most rigid controls. This rifling method achieves extremely close inside uniformity from breech to muzzle. Finished barrels are air-gauge inspected (air-gauged sensitivity is .00005" - five-one-hundred-thousandths!) and 6X borescope in- spected. All barrels, .22 through .30 caliber have groove tolerances within .0005" and uniformity within .0003" No straightening is done, and all barrels are completely stress-relieved. All stainless steel barrels are hand lapped at the factory. Only those barrels passing all spec tests are offered to the trade. Any barrel even slightly “suspect” is started through the production process again and bored to a large caliber. In no other way can quality and reputation be maintained. Slightly more expensive to produce - but vastly greater in quality and ultimate performance. Big Book Catalog, Issue:68, Page:177

AR-15 FRONT SIGHT BENCH BLOCK BROWNELLS

gunsmith tools supplies

Quick View
$39.99
  (8)
    • Check Price
      • AR-15 FRONT SIGHT BENCH BLOCK BROWNELLS

      • Two Working Sides For Installation & RemovalBig, tough, polyethylene block gives fitted support for installing/removing the front sight assembly on mil-spec, AR-15 rifles and carbines. Precision-machined and clearly marked on both sides for driving the mounting pins “IN” or “OUT” of the sight. Accommodates the sling swivel, plus, includes provisions for removing the gas tube roll pin. AR-15, Issue:11, Page:082 AR-15, Issue:11, Page:083 AR-15, Issue:11, Page:084 Brownells Christmas , Issue:2X, Page:018 Big Book Catalog, Issue:68, Page:082 Big Book Catalog, Issue:68, Page:083 Big Book Catalog, Issue:68, Page:085 Big Book Catalog, Issue:68, Page:463 Law Enforcement / Police Store, Issue:13, Page:020 Mini-Catalogs, Issue:05, Page:006 New Product Supplement, Issue:571, Page:001 Sinclair, Issue:5B, Page:252

.22 CALIBER RIMFIRE BARREL LINERS REDMANS

gunsmith tools supplies

Quick View
$35.99 - $88.99
  (90)
    • Check Price
      • .22 CALIBER RIMFIRE BARREL LINERS REDMANS

      • Easily & Professionally Reline Rimfire Rifle Barrels In Your Shop; Made By One Of The Most Respected Names In The Liner IndustryThere are untold thousands of rimfire .22’s over the country today that need only a barrel liner to bring them back to their original shooting abilities. Some of these guns are beautiful collection pieces, others are fine hunting guns and some of them are just “loved” by their owners who want them back to their original condition. Plus, a lot of shooters want to convert to one of the .17 rimfires. Brownells .22 Barrel Liners, made by Redman Mfg., are button rifled with ultra smooth, uniform finish and sharp, distinct rifling for superb accuracy that’s better than - or equal to - an original, new barrel. With the Brownell system, barrel liner installation is not difficult. It can be done with a minimum of tools and shop equipment. Your original investment is quickly paid off in the first few jobs. The instruction booklet gives complete, easy-to-follow details for either the old, classic method of soldering the liners in or, the more modern method of using ACRAGLAS® for the permanent bond between barrel and liner. You’ll find that along with a relining, most of your customers will also want a blue job (Solder or ACRAGLAS will both stand hot bluing temps); a stock refinish and probably action work - “Make it like new” are the usual instructions. This, you can do. When deciding to offer this service for your trade areas, you should also consider the price and quality of some new guns today and tightening up of your customers’ spending habits. By relining, they can often have a better gun for less money. Barrel Liner Instruction Book details the systems used by gunsmiths Bob Schuetz, Willis Sprunger and Ralph Walker. Walker used a variable speed hand drill and ACRAGLAS to hold the liner in. Schuetz solders the liner in place. Sprunger extended a regular bit, drilled the hole in a lathe and bonded with ACRAGLAS. 8½" (21.6cm) x 11" (27.9cm). 16 pages. Instructions FREE, not included. Please request; not sent automatically or click here for a PDF.WARNING: These Redman/Brownell gun barrel liners are made for specific cartridges. Only use with specified cartridges listed in item description below. To chamber these gun barrel liners in other calibers is dangerous and can cause serious bodily injury. Big Book Catalog, Issue:68, Page:179 New Product Supplement, Issue:581, Page:005

#565 PIN PUNCH SET STARRETT

gunsmith tools supplies

Quick View
$5.99 - $62.99
  (51)
    • Check Price
      • #565 PIN PUNCH SET STARRETT

      • Precision Ground-Beautifully PolishedPrecision ground from specially selected tool steel, hardened and highly polished, the Starrett Pin Punches are well proportioned and beautifully finished. Blued, knurled grip area; individually marked for size. Set of all 8 punches comes in handy, fitted, round, plastic bench box. Also available singly. AR-15, Issue:11, Page:082 AR-15, Issue:11, Page:083 Big Book Catalog, Issue:68, Page:082 Big Book Catalog, Issue:68, Page:083 Big Book Catalog, Issue:68, Page:466 Big Book Catalog, Issue:68, Page:502 Big Book Catalog, Issue:68, Page:509 Big Book Catalog, Issue:68, Page:515 Law Enforcement / Police Store, Issue:08, Page:056 Law Enforcement / Police Store, Issue:08, Page:058

PLUG SCREW KIT BROWNELLS

gunsmith tools supplies

Quick View
$8.99 - $158.99
  (53)
    • Check Price
      • PLUG SCREW KIT BROWNELLS

      • Plug Most Any Sight Or Scope Mount Hole On Blued & Stainless Steel FirearmsHandy, money saving assortment of positive stop and standard plug screws in the two most popular sizes. Plug screws are a real time saver around the shop. Fast and easy way to fill holes on barrels and firearm receivers. Can be ground flush and blued or polished, and most times it will be tough to tell if a hole was ever there. Positive stop screws have a rounded top that blends right in with most barrel contours without grinding. Kit also includes pair of chrome-plated, flat jaw tweezers to easily pick up the right screw, and our handy Checker/Shortener Jig makes grinding screws to the right length fast and easy. Big Book Catalog, Issue:68, Page:412 New Product Supplement, Issue:563, Page:002

AR-15 80% LOWER RECEIVER JIG ANDERSON MANUFACTURING

gunsmith tools supplies

Quick View
$75.00
  (75)
    • Check Price
      • AR-15 80% LOWER RECEIVER JIG ANDERSON MANUFACTURING

      • Anderson Manufacturing 80% Lower Receiver Jig allows you to complete a forged aluminum 80% lower receiver.  Jig includes proper diameter bits to drill all necessary holes.  Plates screw together so that you can get accurate and precise geometry for your new build. View Instructions AR-15, Issue:11, Page:085 Big Book Catalog, Issue:68, Page:085

REMINGTON BOLT DISASSEMBLY TOOL KLEINENDORST

gunsmith tools supplies

Quick View
$37.99
  (69)
    • Check Price
      • REMINGTON BOLT DISASSEMBLY TOOL KLEINENDORST

      • Universal Design Makes Disassembly Fast, Safe And EasyRemoves striker assembly in seconds for fast disassembly of all Remington bolts. Works with spring relaxed or cocked. Hook fits into the notch of the firing pin head. Rotating the lever pulls firing pin head back and locks it. Fast and easy. Brownells Christmas , Issue:2X, Page:018 Big Book Catalog, Issue:68, Page:502 Big Book Catalog, Issue:68, Page:504 Law Enforcement / Police Store, Issue:07, Page:049 Mini-Catalogs, Issue:15, Page:006