Categories


AR-15/M16 UPPER RECEIVER VISE BLOCK PRECISION REFLEX, INC.

gunsmith tools supplies

Quick View
$54.95
 
    • View
      • AR-15/M16 UPPER RECEIVER VISE BLOCK PRECISION REFLEX, INC.

      • Two Way To Support Upper Receiver In A Vise Without Risk Of DamageHeavy duty, machined aluminum vise block lets you clamp an AR-15/M16 upper receiver in a bench vise without risk of marring the finish or distorting the receiver from over-tightening. Dual-use design allows the receiver to be positioned top side up or, if it’s a flattop, upside down; either way, the vise grasps the block and never touches the receiver. One side of the block fits in the underside of the receiver and is held securely in place with two, steel, T-pins inserted through the takedown pin holes, so you can install optics, perform thorough cleaning, and do other work on the exterior. Or, slide a flattop receiver rail into the grooves on the other side of the block and tighten the locking bar with the large thumbscrew to hold the receiver upside down for easy access to the underside.

        AR-15, Issue:11, Page:085 Big Book Catalog, Issue:68, Page:085 New Product Supplement, Issue:621, Page:014

AR-15 BARREL EXTENSION WRENCH P&L DEVELOPMENT

gunsmith tools supplies

Quick View
$59.99
 
    • View
      • AR-15 BARREL EXTENSION WRENCH P&L DEVELOPMENT

      • Plenty Of Strength To Get Even The Tightest Barrel Loose One model installs or removes AR-15 barrel extensions safely and easily without making a “wrench” from an old bolt head. Machined, hardened, steel engagement teeth fully engage locking lugs for precise fit; alignment sleeve holds wrench square with barrel, prevents slipping or damage. ¾" hex drive gives plenty of leverage to get really tight extensions loose.

        AR-15, Issue:11, Page:085 Big Book Catalog, Issue:68, Page:085

GUNNER'S MOUNT MA1 PRESENT ARMS INC

gunsmith tools supplies

Quick View
$30.00 - $150.00
 
    • View
      • GUNNER'S MOUNT MA1 PRESENT ARMS INC

      • The Gunner's Mount MA1 is the ideal platform to work AR-15/M4's.  Assemble, disassemble, and repair.  Parts pockets are cut to prevent runaway components and a slot for supporting magazines when making repairs.  The platform will also accommodate pistol magazine posts and other magazine fed weapon systems. Strategically cut for: Magazines re-work. Brownells® AR Front Sight Bench Block and Gunner's Pucks Our AR Upper Mount and AR Lower Mount Our AR Receiver Tube alignment block Upper Repair Fixture Mount, with supports for dust cover and bolt assist removal - The Upper mount is machined from synthetic, non-marring polymer, giving added support both inside and out for distribution of loading as a result of repairs. Ball de-tent pins are provided to securely hold the upper by way of for and aft takedown points. Vertical pins are installed to hold the dust cover in a horizontal position for ease in assembly and disassembly of ejection port parts. Machine cut to allow HK416 dust cover vertical pin and fwd assist retention pin free fall from assemble into parts pocket. Our Patent Pending Upper mount securely holds the upper for optics, forward assist and dust cover repairs. AR Lower Repair Fixture Mount, enables lower receiver to be inverted and worked on the same mount- AR Lower Repair Fixture Mount is machined from synthetic non-marring polymer providing added support inside and out of the lower receiver. Securely held when pinned with the takedown and pivot pins of the receiver. The receiver can be mounted in both upright and inverted position for full access when assembling and disassembling . Use with our Patent Pending Receiver Alignment Block. Ensuring correct 12-6 alignment of the receiver extension tube . Ensure correct stock alignment. The perfect platform and mount for the armorer. AR Magazine Post w/pins for Gunners Mount- The MP-AR-1 firmly holds your AR-15 in the center of our Gunners Mount Plus. This mount gives you a solid base for working on your AR-15. Made of a tough polymer it will not mar or scratch your firearm. Riser Block Assembly- 2 inches tall Receiver Extension Alignment Block- Aligns receiver extension at the 12 O’clock position when tightening down the receiver extension nut.

ALUMA-HYDE® II BROWNELLS

$12.99 - $14.99 USD $12.99 - $14.99 USDclick for offer

Availability: In stock

Sale ALUMA-HYDE® II BROWNELLS handgun shotgun reloading partsbooks partstrigger group

Product Details

Durable Epoxy Base Paint Withstands Bore Cleaners & Solvents The special feature of Aluma-Hyde II (and the reason for its development) is its increased resistance to bore cleaners, solvents and other cleaning chemicals, even trichloroethylene. Today’s family of fast, aggressive bore cleaners really do a terrific job getting dirty gun bores sparkling clean, but they can wreak particular havoc with any other finish they contact. After full cure, Aluma-Hyde II proved solvent-proof to all but the most aggressive, copper-removing bore solvents. Aluma-Hyde II is formulated with a hard-curing epoxy base that contains additional, high-density pigment for a durable finish that sticks to all properly prepared aluminum and alloy surfaces, steel and plastics - it’s great on synthetic stocks. Aluma-Hyde II is available in a variety of colors to help the gunsmith match the vast number of applications found in the average gunshop. Matte finishes are available in Parkerizing Gray (medium gray), Dark Parkerizing Gray (medium dark), Stainless Steel Gray (light), Matte Ruger Gray closely matches the factory color but reduces reflections, Earth Brown, Matte Clear, O.D. Green for creating camo pattern stocks, Desert Tan (light, desert-tan sand), Coyote (light, gray-brown) and the original favorite, Matte Black. To compliment the matte finishes, Semi-Gloss Black, Gloss Ruger Gray closely matches the factory color and shine. Gloss Clear help expand the overall applications of this time- and money-saving product. We like the Matte Black color for refinishing those used AR-15 buttstocks and handguards you pick up when building a parts gun, knock-around “truck” guns and, of course, anodized parts. Aluma-Hyde II dries to the touch in only minutes and reaches full cure in about a week. Here’s the way we apply it: Warm the part and the Aluma-Hyde II to about 90? F.; spend a couple of minutes shaking the daylights out of the Aluma-Hyde II and apply a medium coat for good coverage. You can recoat in a few minutes but don’t wait more than thirty minutes. Once Aluma-Hyde II starts curing, you must wait until it’s fully cured to recoat. You can cut the cure time to approximately two days by circulating warm air (90? F. works fine) past the part. Absolutely no primer coat is required for a tough, durable, abrasion-resistant, rustproof finish that blends beautifully and compliments all gun finishing applications.

Brownells Guntechs recommend use of 084-179-004 All Purpose Clean Out Nozzle prior to attempting to spray this product. 1911, Issue:04, Page:062 AR-15, Issue:04, Page:077 Brownells Christmas , Issue:5X, Page:020 Big Book Catalog, Issue:68, Page:436 Law Enforcement / Police Store, Issue:07, Page:054 Mini-Catalogs, Issue:05, Page:010 New Product Supplement, Issue:581, Page:014

Product Reviews

Sale ALUMA-HYDE® II BROWNELLS  handgun shotgun reloading partsbooks partstrigger group

ALUMA-HYDE® II BROWNELLS InStock yes
Valid Offer! Things to Buy at this store.
If you are not fully satisfied with your purchase, you are welcome to return any unworn and unwashed items with tags intact and original packaging included.
Buy at this store.

  Durable Epoxy Base Paint Withstands Bore Cleaners & Solvents The special feature of Aluma-Hyde II (and the reason for its development) is its increased resistance to bore cleaners, solvents and other cleaning chemicals, even trichloroethylene. Today’s family of fast, aggressive bore cleaners really do a terrific job getting dirty gun bores sparkling clean, but they can wreak particular havoc with any other finish they contact. After full cure, Aluma-Hyde II proved solvent-proof to all but the most aggressive, copper-removing bore solvents. Aluma-Hyde II is formulated with a hard-curing epoxy base that contains additional, high-density pigment for a durable finish that sticks to all properly prepared aluminum and alloy surfaces, steel and plastics - it’s great on synthetic stocks. Aluma-Hyde II is available in a variety of colors to help the gunsmith match the vast number of applications found in the average gunshop. Matte finishes are available in Parkerizing Gray (medium gray), Dark Parkerizing Gray (medium dark), Stainless Steel Gray (light), Matte Ruger Gray closely matches the factory color but reduces reflections, Earth Brown, Matte Clear, O.D. Green for creating camo pattern stocks, Desert Tan (light, desert-tan sand), Coyote (light, gray-brown) and the original favorite, Matte Black. To compliment the matte finishes, Semi-Gloss Black, Gloss Ruger Gray closely matches the factory color and shine. Gloss Clear help expand the overall applications of this time- and money-saving product. We like the Matte Black color for refinishing those used AR-15 buttstocks and handguards you pick up when building a parts gun, knock-around “truck” guns and, of course, anodized parts. Aluma-Hyde II dries to the touch in only minutes and reaches full cure in about a week. Here’s the way we apply it: Warm the part and the Aluma-Hyde II to about 90? F.; spend a couple of minutes shaking the daylights out of the Aluma-Hyde II and apply a medium coat for good coverage. You can recoat in a few minutes but don’t wait more than thirty minutes. Once Aluma-Hyde II starts curing, you must wait until it’s fully cured to recoat. You can cut the cure time to approximately two days by circulating warm air (90? F. works fine) past the part. Absolutely no primer coat is required for a tough, durable, abrasion-resistant, rustproof finish that blends beautifully and compliments all gun finishing applications.

Brownells Guntechs recommend use of 084-179-004 All Purpose Clean Out Nozzle prior to attempting to spray this product. 1911, Issue:04, Page:062 AR-15, Issue:04, Page:077 Brownells Christmas , Issue:5X, Page:020 Big Book Catalog, Issue:68, Page:436 Law Enforcement / Police Store, Issue:07, Page:054 Mini-Catalogs, Issue:05, Page:010 New Product Supplement, Issue:581, Page:014

See Detail Online And Read Customers Reviews ALUMA-HYDE® II BROWNELLS prices over the online source See people who buy "ALUMA-HYDE® II BROWNELLS"
Research before buy online ALUMA-HYDE® II BROWNELLS
Make sure the store keep your personal information private before buying ALUMA-HYDE® II BROWNELLS Make sure you can proceed credit card online to buyALUMA-HYDE® II BROWNELLS plus the store protects your information from fraudulents
Make sure the customer support is obviously there to help you when you place ALUMA-HYDE® II BROWNELLS order with them

Shopping Tips for buy ALUMA-HYDE® II BROWNELLS  handgun shotgun reloading partsbooks partstrigger group


No online shopping store/website needs your social security number or your birthday to do business Then you don't give this information to store/website. AND Don't wait for your bill to come during the end associated with month. Go online regularly during the holiday season and look at electronic statements for the credit card, debit card, and checking accounts. Make sure you don't see any fraudulent charges. If you found fraudulent charges. If you want to buy ALUMA-HYDE® II BROWNELLS. Please buy it from trusted store.


Before You Buy, You Should to:

  • Reading the consumer reviews of ALUMA-HYDE® II BROWNELLS before get. It will give a much fuller understanding to you of the pros and cons of it.
  • You should to find the very best because sometimes it helps you in buying options.
  • You need to to see the specifications & top features of ALUMA-HYDE® II BROWNELLS.
  • Shipping facts and information are different for any products & by contract such as free transport option, an such like.
  • You should to evaluate the price, special offers, price, and latest prices of shopping store before consider to buy from any store.
  • You need to to selected and get from respected store at  handgun shotgun reloading partsbooks partstrigger group

 

Tag Visitor  handgun shotgun reloading partsbooks partstrigger group
Alabama, Alaska, Arizona, Arkansas, California, Colorado, Connecticut, Delaware, District of Columbia, Florida, Georgia, Hawaii, Idaho, Illinois, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, Pennsylvania, Rhode Island, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West Virginia, Wisconsin, Wyoming
Disclosures! Commerce Content is independent of Editorial and Advertising, Hyperlinks to supporting retailers on etqi.us are automatically made into affiliate links, and if you purchase a product through these links, We may get a small commission on the sale.