Categories


AR-15/M16 RECEIVER ACTION BLOCK BROWNELLS

armorer tools

Quick View
$59.99 - $79.99
 
    • View
      • AR-15/M16 RECEIVER ACTION BLOCK BROWNELLS

      • Protect Receiver From Damage When Clamping Hold rifle firmly for safe, effective cleaning, assembly, & repair. Apply vise pressure or torque the barrel nut without crushing, twisting, or otherwise distorting receiver halves. Transforms rebarreling the AR-15/M16 an easy, one-man job. Minimizes potential damage to the barrel detent pin & receiver detent notch. DO NOT USE ON BILLET UPPERS OR DAMAGE TO THE UPPER CAN RESULT

ROLL PIN HOLDERS BROWNELLS

armorer tools

Quick View
$14.99 - $49.99
 
    • View
      • ROLL PIN HOLDERS BROWNELLS

      • Hollow-Ended "Starter" Punches For Roll PinsHolds roll pins perfectly aligned for starting correctly. Especially good on the tiny, tough-to-grab ones, or those in tight places. 1/16" is notched to clear M16/AR-15 rear sight. 3.5mm excellent for holding the pin that retains the breech block on Sig handguns. Finish driving with roll pin punch. O/A in chart means "Overall". Available individually or as a set of 5.

AR-15/M16 LOWER RECEIVER VISE BLOCK BROWNELLS

armorer tools

Quick View
$49.99 - $79.99
 
    • View
      • AR-15/M16 LOWER RECEIVER VISE BLOCK BROWNELLS

      • Protect Receiver From Damage When Clamping Heavy-duty blocks allow you to firmly clamp AR-15/M16 receiver halves in a vise without risk of crushing, twisting, or otherwise distorting them when applying vise pressure or torquing the barrel nut. Keeps your rifle secure for safe, effective cleaning, assembly, and repair. Unbreakable urethane vise block takes all the clamping force, so your expensive lower receiver won’t be damaged or distorted. Insert block into the magazine housing from the top or bottom, then clamp the other end in your bench vise. The magazine catch locks to the block, safely and securely holding the rifle for assembly, disassembly, cleaning, or repair. Will not mar or scratch the finish. Fits tightly in most receivers and may require filing to fit others. 

AR-15 DCF HANDGUARD REMOVAL TOOL DARRELS CUSTOM FIREARMS

armorer tools

Quick View
$24.99
  (95)
    • Check Price
      • AR-15 DCF HANDGUARD REMOVAL TOOL DARRELS CUSTOM FIREARMS

      • No More Frustration Installing Or Removing AR-15 Handguards Easy-to-use hook pushes the delta ring straight down, allows both handguards to be removed in just seconds Made in the U.S.A.

ELASTI-TOP GUN TAG BROWNELLS

armorer tools

Quick View
$12.99 - $109.99
  (84)
    • Check Price
      • ELASTI-TOP GUN TAG BROWNELLS

      • Easy Attachment To Gun; No Loose Strings; Available In 3 Colors Heavy card stock tag attaches easily to the gun with a handy elastic loop—no strings to tie. Plenty of stretch to fit around a slide, stock, forend, or even through the triggerguard. Eleven pre-printed headings give you and your customer all the information needed to make the sale: stock number, serial number, manufacturer, model, action type, caliber/gauge, barrel length, choke, two lines for “other” info, retail price, a “sale price” line, and check boxes for “New” or “Used.” Available in natural Manila or Light Blue, so you can color-code your inventory. Even create a coding system for new, used, or consignment guns.

1/4" DRIVE TORQUE HANDLE SEEKONK PRECISION TOOLS

armorer tools

Quick View
$104.99 - $116.99
  (81)
    • Check Price
      • 1/4" DRIVE TORQUE HANDLE SEEKONK PRECISION TOOLS

      • Takes The Guesswork Out Of Tightening Triggerguard ScrewsImprove accuracy and shot-to-shot consistency by torquing rifle triggerguard, plus any ring and base screws to the same reading every time. Convenient T handles break away at pre-set, inch/pound torque values and the back-off feature allows the screw to be removed again. Accepts all " drive attachments.

AR-15 SIGHT WRENCH BROWNELLS

armorer tools

Quick View
$15.99 - $19.99
  (5)
    • Check Price
      • AR-15 SIGHT WRENCH BROWNELLS

      • Fits A1 / A2Fast, Convenient Sight Adjustment Grip the sight notches firmly with no "roll out" for easy exact sight adjustments. Wont bend or break, gives years of service. Hex-shaped bodies are easy to grasp, easy to turn and won't roll off your bench. Made in the U.S.A.

FIXED BLADE SCREWDRIVER STARTER SET BROWNELLS

armorer tools

Quick View
$89.99 - $199.99
  (78)
    • Check Price
      • FIXED BLADE SCREWDRIVER STARTER SET BROWNELLS

      • Hollow-Ground Radius Gives More Strength Prevent damage to screws slots with hollow-ground bits that turn smoothly and evenly for complete metal-to-metal contact between the tip of the bit & the entire screw slot. Short 2 blades eliminate wobble & tilt. Compact handles give a solid grip when large, tight screws have to be broken loose, yet also give "fingertip" control when dealing with tiny, delicate screws.

CAN'T MAR 1911 AUTO BUSHING WRENCH BROWNELLS

armorer tools

Quick View
$6.99
  (1)
    • Check Price
      • CAN'T MAR 1911 AUTO BUSHING WRENCH BROWNELLS

      • Removes Bushings Without Damage To Finishes Easily remove barrel bushing from 1911 Autos with no scarring or marring the finish of bushing or slide. Fits all the calibers & variations. Ticker & heftier than other synthetic wrenches, gets out even the most tightly fitted, match-grade bushing.

ULTIMATE ARMORER'S TOOL FOR GLOCK® LONE WOLF DIST.

armorer tools

Quick View
$20.99
  (34)
    • Check Price
      • ULTIMATE ARMORER'S TOOL FOR GLOCK® LONE WOLF DIST.

      • One Tool Glock Maintenance That Clips To Your Pocket Carry this convenient pocket-clip style, multi-purpose tool for emergency on-the-spot maintenance or disassembly, changing sights, replacing parts or giving your favorite Glock a quick brushing off. Features a 3/32" pin punch, 3/16" flat blade for connector removal, 3/16" sight nut driver & cleanup brush. Made in the U.S.A. “GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.  Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.  The use of Glock on this page is merely to advertise the sale of Glock parts or components.  As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.

MAGNA-TIP SCREWDRIVER SETS BROWNELLS

armorer tools

Quick View
$33.99 - $51.99
  (93)
    • Check Price
      • MAGNA-TIP SCREWDRIVER SETS BROWNELLS

      • Screwdriver Sets & Bits For The Professional Gun Shop Prevent damage to screws slots with hollow-ground bits that turn smoothly and evenly for complete metal-to-metal contact between the tip of the bit & the entire screw slot. Includes eleven bits for slotted screws, #1, #2 and #3 Phillips bits, plus ten hex bits for socket head screws. Fast changes from one bit size to another without the expense of owning several screwdrivers, bits are held in the shaft chuck by a permanent magnet, a spring clip or an O-ring collet.

FIELD TOOL PACK for GLOCK BROWNELLS

armorer tools

Quick View
$304.99
  (21)
    • Check Price
      • FIELD TOOL PACK for GLOCK BROWNELLS

      • Complete, Dedicated Go-Anywhere Toolkit For Repair & MaintenanceHigh-quality tools for keeping any Glock pistol in peak working orderComes with magazine tool specifically designed for easily removing Glock floorplatesRear sight mover, front sight nut driver, .050" hex wrench for aftermarket adjustable rear sightsChannel liner replacement tool, Glok Blok vise block, armorers orange slide cover platePlus, roll pin punches, flat-tip screwdriver, Break-Free CLP (2 oz. bottle), and an array of nylon cleaning brushes, including 9mm/.40/.45 caliber bore brushesCordura nylon case keeps tools secure and separated to minimize noise; O.D. green. 11" (29.2cm) long, 8" (21.6cm) high, 3" (7.6cm) thick “GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.  Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.  The use of Glock on this page is merely to advertise the sale of Glock parts or components.  As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.

TOOL KIT FOR SIG HANDGUNS BROWNELLS

armorer tools

Quick View
$281.99 - $296.99
  (49)
    • Check Price
      • TOOL KIT FOR SIG HANDGUNS BROWNELLS

      • The Tools You Need To Fix SIGs CorrectlyOne convenient kit with the most needed tools for SIG maintenance. Designed for the police armorer and professional gunsmith, each tool in the kit has been thoroughly field tested.View all items included in this kit.

UNIVERSAL SIGHT INSTALLATION TOOL MEPROLIGHT

armorer tools

Quick View
$679.99
  (87)
    • Check Price
      • UNIVERSAL SIGHT INSTALLATION TOOL MEPROLIGHT

      • Adjust & Install Over Forty Different Semi-Auto Pistol Sights Super accurate sight adjustment for pistols. Wont damage sites or slides - versatile multi-position, slide support block & separate slide clamp adjust quickly. Solid aluminum body wont flex - plenty of leverage to move the most stubborn sights.

AR-15 MULTI-TOOL DPMS

armorer tools

Quick View
$53.99
  (90)
    • Check Price
      • AR-15 MULTI-TOOL DPMS

      • Durable Seven-Function Steel Wrench for AR-15 Rifles Maintain, repair or building AR-15 / M16 rifles with this seven-in-one tool Install or remove: free float tubes & peg-style barrel nuts, standard barrel nuts, carbine stock, compensator, extension tube or buttstock screw Includes 5/8" & " wrench slots, a " square hole for a torque wrench, plus screwdriver tip

1911/M16 ARMORER'S TOOL 10-8 PERFORMANCE LLC

armorer tools

Quick View
$7.95
  (49)
    • Check Price
      • 1911/M16 ARMORER'S TOOL 10-8 PERFORMANCE LLC

      • Strong Non-Metal Tool Wont Marr Or Damage Parts Pry or push without damaging the part or gun finishuses tough, non-marring glass-reinforced nylon tool instead of metal. Use chisel point for depressing springs or spring-loaded partseven use to thread MOLLE straps through webbing. Semi-flexible flat blade gets into tight spots or serves as a temporary shim. Moulding helps prevent slippage when working with oily or greasy hands.

BASIC GUNSMITHING KIT BROWNELLS

armorer tools

Quick View
$299.99
  (20)
    • Check Price
      • BASIC GUNSMITHING KIT BROWNELLS

      • The Essential Gunsmithing Starter Kit Get a hand picked selection of essential gunsmithing tools. Tackle basic service, cleaning & repair jobs on practically any gun brought to you.

AR-15/M16 COMBINATION WRENCH BROWNELLS

armorer tools

Quick View
$35.00
  (98)
    • Check Price
      • AR-15/M16 COMBINATION WRENCH BROWNELLS

      • Original Factory DesignStraightforward Disassembly/Reassembly Exact replica of the original military design so you know it will fit & work Use to remove barrel nut; remove & install flash suppressors; and install lower receiver extensions Made in the U.S.A.

AR-15/M15/AR-STYLE .308 GAS TUBE WRENCH MARK BROWN CUSTOM

armorer tools

Quick View
$25.00
  (98)
    • Check Price
      • AR-15/M15/AR-STYLE .308 GAS TUBE WRENCH MARK BROWN CUSTOM

      • Protects Tube From Crushing During Installation & RemovalClamps around those fragile, easy-to-bend gas tubes to prevent damage during both removal and installation and adds a convenient handle.

AR-15/M16/AR-STYLE .308 CARRIER CARBON SCRAPER MARK BROWN CUSTOM

armorer tools

Quick View
$22.99
  (37)
    • Check Price
      • AR-15/M16/AR-STYLE .308 CARRIER CARBON SCRAPER MARK BROWN CUSTOM

      • Solves Cycling Problems, Removes Carbon From Bolt Recess Break loose & removes hard-to-get-at carbon buildup without damaging the bolt carrier.

FOLD-UP WRENCH SETS BONDHUS

armorer tools

Quick View
$4.99 - $10.99
  (72)
    • Check Price
      • FOLD-UP WRENCH SETS BONDHUS

      • Compact Units Fit Range Bag Or Tool Box Compact, easy -to-grip sets feature chamfered tips for easier insertion into screw heads. #12591 - Hex. Nine sizes from .050" to 3/16". #12589 - Hex. Nine sizes from 5/64" to 1/4". #12592 - Metric. Seven sizes from 1.5mm to 6mm. #12632 - Torx®. Eight sizes from T6 to T25.

1" NYLON/BRASS HAMMER COMBO BROWNELLS

armorer tools

Quick View
$19.99
  (96)
    • Check Price
      • 1" NYLON/BRASS HAMMER COMBO BROWNELLS

      • Brass On One Side No-Mar Nylon On The Other Two hammers in one tool, saves space, costs less. Nylon head resists breaking & won't mar metal. Solid brass for basic for gunsmith use. Made in the U.S.A.

M16/M4 WEAPONS FIELD MAINTENANCE PACK BROWNELLS

armorer tools

Quick View
$259.99
  (23)
    • Check Price
      • M16/M4 WEAPONS FIELD MAINTENANCE PACK BROWNELLS

      • Dedicated Kits For Field Repair & Maintenance Of Tactical Weapons Field strip, repair, & maintain weapons while on the move. No confusion or wasted time spent scrounging through large field case of loose odds & ends - each kit is a carefully selected, set of high-quality field armorer tools dedicated to working on specific weapon types. Cordura case keep tools secure & separated to help minimize noise that could jeopardize your mission. Made in the U.S.A.

SIG COMBO TOOL SIG ARMS

armorer tools

Quick View
$44.99
  (42)
    • Check Price
      • SIG COMBO TOOL SIG ARMS

      • Handy Tool For Bench Or Field UseMulti-use tool with large, easy-to- grasp handle performs several maintenance and repair tasks. Removes grip screws, mainspring assembly; provides controlled removal of mainspring. Installs and removes sear spring and magazine catch. Handy to have on the bench, indispensable for emergencies in the field.

AR-15/M16/AR-STYLE .308 HANDGUARD REMOVAL TOOL BROWNELLS

armorer tools

Quick View
$19.99
  (36)
    • Check Price
      • AR-15/M16/AR-STYLE .308 HANDGUARD REMOVAL TOOL BROWNELLS

      • Remove Handguards Quickly, Easily & Painlessly No need for a second pair of hands when removing AR-type handguards Simply insert into mag well, position handles over delta ring, & push down to compress the delta ring spring Made in the U.S.A.

NYLON FRONT-SIGHT DRIFT PUNCH BROWNELLS

armorer tools

Quick View
$4.99
  (80)
    • Check Price
      • NYLON FRONT-SIGHT DRIFT PUNCH BROWNELLS

      • Non-Marking Drift For Sights & PinsThis handy little punch is made for just one purpose . . . to drive the front sight in or out without marring it or the barrel. We first tried Brass, but as you know, it leaves a "Brass tracking" wherever it rubs. We then tried fiber, but after a few hard blows it shatters. NYLON doesn't mark the barrel or sight, nor does it shatter or lose its shape after hard and prolonged use.

UP-TAC AR-15 FRONT SIGHT TOOL BIT UP-TAC LLC.

armorer tools

Quick View
$19.99
  (94)
    • Check Price
      • UP-TAC AR-15 FRONT SIGHT TOOL BIT UP-TAC LLC.

      • Made from 4140 Steel Black Oxide Finish Made in the USA Use with standard screwdrivers or with Brownells Magna-Tip Drivers Small, fits in you range bag