Categories


POLISHED FOREND 20" / 18" UBERTI

Quick View
$157.76
 
    • View
      • POLISHED FOREND 20" / 18" UBERTI

      • FITS: 1873 Renegade Big Book Catalog, Issue:68, Page:579

F/E, TRG-22, GREEN, COMPLETE BERETTA USA

Quick View
$635.61
 
    • View
      • F/E, TRG-22, GREEN, COMPLETE BERETTA USA

      • FITS: Sako Big Book Catalog, Issue:66, Page:561

AR-15 COBRA FREE FLOAT RAIL SYSTEM M-LOK X PRODUCTS

Quick View
$229.00
 
    • View
      • AR-15 COBRA FREE FLOAT RAIL SYSTEM M-LOK X PRODUCTS

      • At just .68 lbs (14.5" model) the Cobra Rail handguard system is one of the most lightweight handguards on the market. With 8 faces to attach M-LOK™ or KeyMod accessories, the Cobra rail offers tremendous versatility and customization. Each rail is hard-coat anodized for a rugged, long lasting finish.  Handguard features front picattinny rail attachments, as well as four QD sling attachment points.

AR-15 FREE FLOAT HANDGUARD DPMS

Quick View
$49.99 - $59.99
  (46)
    • Check Price
      • AR-15 FREE FLOAT HANDGUARD DPMS

      • Two-Piece, Design; Free-Floats AR-15/M16 Barrels For Greater Accuracy Lightweight, two-piece aluminum handguard eliminates exterior pressure points on AR-15/M16 barrels to help increase accuracy. Exta rigid design is made from extruded aluminum. Separate barrel nut and forend tube thread together; easy to install and torque to proper specifications. Completely replaces the plastic, factoy handguard, barrel nut and front cap for less weight and better heat dissipation. AR-15, Issue:11, Page:050 Big Book Catalog, Issue:68, Page:048

AR-15 OVERMOLDED™ FOREND HOGUE

Quick View
$80.99 - $178.07
  (2)
    • Check Price
      • AR-15 OVERMOLDED™ FOREND HOGUE

      • Comfortable, Non-Slip Grip Surface Machined aluminum free-float forends provides an exceptionally positive, non-slip gripping surface for the support hand to help ensure maximum weapon control. Easy-to-install, two-piece free-float design eliminates handguard stress on the barrel that can compromise accuracy. Use with rifle’s factory gas tube; if changing barrel length, purchase replacement gas tube of appropriate length. Rifle- and carbine-length models available in cobblestone-texture Overmolded™ rubber grasping surface.  AR-15, Issue:11, Page:051 Big Book Catalog, Issue:68, Page:048 Law Enforcement / Police Store, Issue:13, Page:014 New Product Supplement, Issue:503, Page:000

AR-15/M16 SLR SERIES RAILED HANDGUARDS YANKEE HILL MACHINE CO., INC.

Quick View
$160.99 - $194.99
  (41)
    • Check Price
      • AR-15/M16 SLR SERIES RAILED HANDGUARDS YANKEE HILL MACHINE CO., INC.

      • YHM is very proud to introduce our newest line of AR-15 handguards, the SLR (Slim, Light, Railed) series. These handguards were designed to address the two main customer requests regarding current handguard models. The number one request was to make a thinner handguard. The second most common request was to design a handguard that would accept most aftermarket piston systems. The new profile of the SLR allows for most piston systems to be used while maintaining a top rail that co-witnesses with the upper receiver.  The top rail was redesigned so that when installed it creates one continuous picatinny rail between the upper receiver and the handguard. Also redesigned is the method for attaching the handguard to the receiver. AR-15, Issue:11, Page:053 Big Book Catalog, Issue:68, Page:051

AR-15/M16/ 308 AR JP MIL-STD-1913 MODULAR RAILS J P ENTERPRISES

Quick View
$32.99 - $99.99
  (87)
    • Check Price
      • AR-15/M16/ 308 AR JP MIL-STD-1913 MODULAR RAILS J P ENTERPRISES

      • Configure Accessory Rails & Swivels On Tactical Rifles For Each Mission  Rail Kits designed for JP system, will also work with many other free-float tubes. Modular handguard/rail system gives the tactical shooter maximum flexibility to customize the number, position, and length of accessory rails on his rifle. Mount rails or sling swivels at 45° intervals around the handguard. AR-15, Issue:11, Page:050 Big Book Catalog, Issue:68, Page:048 Law Enforcement / Police Store, Issue:08, Page:013 Mini-Catalogs, Issue:13, Page:007 New Product Supplement, Issue:611, Page:005 Sinclair, Issue:5B, Page:251

AR-15/M16 MODULAR RAIL FOREND TROY INDUSTRIES, INC.

Quick View
$169.99 - $239.99
  (57)
    • Check Price
      • AR-15/M16 MODULAR RAIL FOREND TROY INDUSTRIES, INC.

      • Four-Rails For Maximum Accessory Mounting Versatility; Free-Float Models Free-float handguard provides four U.S. MIL-STD 1913 Picatinny rails at 3, 6, 9, and 12 o’clock positions for mounting a wide variety of accessories. Top rail aligns with flattop receiver rail to provide an extra-long expanse of uninterrupted rail space without additional cantilever mounts that add complexity and weight to your gun. Two-piece design allows easy installation on original factory barrel nut without removing front sight; factory delta ring must be removed, or low-profile gas block installed. A robust clamp and four anti-rotation alignment bolts lock the forend to the rear of the barrel and actually reinforce the barrel/receiver connection. Large vent holes dissipate heat from the barrel and minimize weight. White alphanumeric identifiers on cross slots ensure easy repeatability of accessory positions when changing configuration from one mission to another. All models, except MRF-MX, have two receptacles on each side rail for 360° push-button sling swivels. Precision machined from high-grade aluminum billet, then Type III hardcoat anodized for strength and corrosion protection, with Teflon® additive for extra resistance to surface abrasion. MRF-C - 7" long, fits carbine-length gas system. MRF-CX – 12" long, extended rail fits carbine-length gas system and has opening for the gas block/front sight. MRF-M - 9" long, fits mid-length gas system and has clearance for factory front sight/gas block and handguard cap. MRF-MX – 10" long, fits carbine- and mid-length gas system; requires low-profile gas block. Does not have sling swivel receptacles. MRF-RX – 13.8" long, fits any-length gas system; requires low-profile gas block. AR-15, Issue:11, Page:053 Big Book Catalog, Issue:68, Page:052 Law Enforcement / Police Store, Issue:07, Page:012 New Product Supplement, Issue:621, Page:003

AR-15/M16 M-LOK POLYMER RAIL SECTIONS MAGPUL

Quick View
$9.45 - $15.15
  (20)
    • Check Price
      • AR-15/M16 M-LOK POLYMER RAIL SECTIONS MAGPUL

      • Designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight. Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

AK-47/74 HANDGUARD TROY INDUSTRIES, INC.

Quick View
$124.99 - $149.99
  (47)
    • Check Price
      • AK-47/74 HANDGUARD TROY INDUSTRIES, INC.

      • Upgrade your AK variant with this line of handguards from Troy Industries. The top rail fits replaces the factory gas tube and provides 5 inches of Picatinny rail space to mount optics and accessories. The low profile of the rail allows lower 1/3 co-witness with some optics. Replaces factory gas tube easily; no gunsmithing required. Length is adjustable for variation between rifle manufacturers. The short and long bottom rails are comfortable and sleek replacements for the standard wood or plastic hand guards for the AK-type rifles. These handguards have cooling holes that allow the rail to run cool, even after extended firing and will not be affected by heat the way wood or plastic hand guards are. The cooling holes also allow the use of Troy Rail Sections for additional versatility. The short handguard extends by 4 inches past the standard AK hand guards and the long handguard extends by 7 inches past the standard AK hand guards, allowing for more shooting stance options. The long rail also features 3 inches of picatinny rail to provide space for mounting optics and accessories. The low profile of the rail will allow co-witness with various optics. Machined from hardened aircraft aluminum with stainless steel components and finished in MIL-SPEC hardcoat anodizing. The handguards are designed to be used with both stamped and milled receiver AKs which use a standard length hand guard and the sling mount on the hand guard retaining band. The top rail can be used with the factory handguard, or with either the Troy short or long bottom rails. The short and long bottom rails can be used with the factory original gas tube and top handguards, or in conjunction with the Troy top rail. Troy AK top and bottom rails may not fit all AK variants.

AR-15 BCMGUNFIGHTER™ KMR KEYMOD FREE FLOAT HANDGUARDS BRAVO COMPANY

Quick View
$251.99 - $276.95
  (37)
    • Check Price
      • AR-15 BCMGUNFIGHTER™ KMR KEYMOD FREE FLOAT HANDGUARDS BRAVO COMPANY

      • Freefloats Barrel & Gives Fast Install/Removal Of Accessories At its heart, the KeyMod™ system creates the potential for universal modularity between various manufacturers of accessories and accessory rails. As more options become available, new KeyMod™ accessories will attach directly to the KeyMod™ slots rather than via Picatinny rail segments, creating a lighter, cleaner, and less bulky weapon system. The BCM KMR also allows for a greater range of customization, offering an additional 4 offset mounting points between traditional 3, 6, 9, and 12:00 positions. Manufactured from an exclusive blended aluminum and magnesium alloy, the BCM KMR weighs 30-40% less than pure aluminum with the same strength properties. The BCM KMR also features a proprietary patent pending mounting, indexing and lock up system that mitigates 12:00 rail movement due to heat generated from the barrel nut.  The KMR's propriety finish is a plasma deposition process originally developed for the Aerospace industry. The finish creates a stabilized, ceramic-like surface coating with superior wear and scratch resistance when compared to anodized or even hard chrome. The stabilized nature of the coating means it has a higher corrosion resistance as well, due to the lack of ‘pores’ in the surface. AR-15, Issue:11, Page:049 Big Book Catalog, Issue:68, Page:047 Sinclair, Issue:5B, Page:251

M-LOK HANDSTOP KIT MAGPUL

Quick View
$23.70
  (62)
    • Check Price
      • M-LOK HANDSTOP KIT MAGPUL

      • The M-LOK Hand Stop Kit serves as a light weight, low-profile M-LOK slot index point for improved weapon control, or as a forward stop to prevent the shooter’s hand from reaching the hot front sight assembly or muzzle. The kit includes one M-LOK Hand Stop, one M-LOK Index Panel, and one M-LOK Rail Cover Type 2 for the individual user to configure their kit as they desire. Also included in this kit is an M-LOK Hand Stop MOE Adapter for use with Magpul polymer M-LOK Hand Guards or Forends as well as other wider profile rails.

AR-15/M16 ENHANCED HANDGUARDS AERO PRECISION

Quick View
$175.00 - $205.00
  (42)
    • Check Price
      • AR-15/M16 ENHANCED HANDGUARDS AERO PRECISION

      • The forged handguards are simply attached to the Aero Precision's M4E1 Enhanced Upper Receiver with the 8 included screws to provide a strong, stable, free-floating rail. The handguards are available in KeyMod or M-Lok versions, in either 12” or 15” lengths. AR-15, Issue:11, Page:001

AR-15/M16 XTM ENHANCED RAIL PANELS MAGPUL

Quick View
$7.55
  (82)
    • Check Price
      • AR-15/M16 XTM ENHANCED RAIL PANELS MAGPUL

      • The XTM Enhanced Rail Panels are low-profile, two-piece covers that attach anywhere on a 1913 Picatinny rail without having to remove previously mounted accessories. Replacing the original XTM Panels, the Enhanced XTM Panels feature an aggressive anti-slip texture and dual-side routing clips for retention of light/laser cables. The design and reinforced material construction ensure the panels will remain in place under all operating conditions, but allows for easy removal using the tips of two rounds when necessary. Eight section will make four panels that cover one side of a carbine-length rail. Available in Black, Flat Dark Earth,  and OD Green. AR-15, Issue:11, Page:055 Big Book Catalog, Issue:68, Page:053

308 AR CARBINE QUAD RAIL FREE FLOAT HANDGUARD DPMS

Quick View
$99.99
  (93)
    • Check Price
      • 308 AR CARBINE QUAD RAIL FREE FLOAT HANDGUARD DPMS

      • ?DPMS 308 AR Carbine Free Float Quad Rail Handguard features Picatinny rails on each side. Available in Low or High profile heights, to match both generations of DPMS uppers. Includes barrel nut, handguard, and lock ring. LR-308 barrel nut wrench is required for installation. Determine which upper receiver you have prior to ordering. Newer DPMS upper receivers feature the low height. Low receiver will measure 1/8" thick from top of receiver rail to the inside of the charging handle cut.

308 AR KEYMOD SERIES FREE FLOAT HANDGUARDS MIDWEST INDUSTRIES, INC.

Quick View
$219.95 - $229.95
  (20)
    • Check Price
      • 308 AR KEYMOD SERIES FREE FLOAT HANDGUARDS MIDWEST INDUSTRIES, INC.

      • Super slim 1.75 inch outside diameter Incredibly lightweight design High quality MIL-STD 1913 top rail, T-marked for accessory location Constructed from 6061 aluminum, hard coat anodized for a lifetime of service Five anti-rotation QD swivels Fully dehorned for a non-abrasive, comfortable feel Barrel Nut and Barrel Nut Wrench included Some minor gunsmithing required

SP SERIES HANDGUARDS, M-LOK MIDWEST INDUSTRIES, INC.

Quick View
$139.95 - $174.95
  (68)
    • Check Price
      • SP SERIES HANDGUARDS, M-LOK MIDWEST INDUSTRIES, INC.

      • Extremely rugged, one piece free float design and construction Features seven sides of M-LOK compatible slots Inside Diameter is 1.75" Outside Diameter is 2.0" High qualtity MIL-STD 1913 top rail T-Marked for accessory location One five slot M-LOK polymer rail section included Barrel nut wrench included Constructed from 6061 aluminum and hard coat anodized for a life of service 100& Made in the USA

AR-15/M16 GEN II SS SERIES KEYMOD HANDGUARD, FLAT DARK EARTH MIDWEST INDUSTRIES, INC.

Quick View
$174.95 - $219.95
  (86)
    • Check Price
      • AR-15/M16 GEN II SS SERIES KEYMOD HANDGUARD, FLAT DARK EARTH MIDWEST INDUSTRIES, INC.

      • Lightweight free float, handguard features a bolt-on KeyMod rail that let you mount accessories exactly where you need them without the weight and bulk of unused rail space. Full-length T-marked MIL-STD 1913 Picatinny top rail fits flush against the upper receiver, creating a monolithic expanse of rail for easy mounting of long-eye-relief optics. Fully dehorned handguard is easy on the hands, while the exceptionally narrow 1½" outside diameter is easy to grip and fits securely in your hand. Five limited rotation QD swivel points, two in the rear and two in the front, plus a forward one on the bottom, provide multiple sling mounting options. Proprietary barrel nut, barrel nut wrench, and one 2.1" keymod rail section are included. Some minor gunsmithing is required for installation. Additional 2.1" (5 cross-slots) and 3.75" (9 cross-slots) KeyMod rails sold separately. AR-15, Issue:11, Page:052 Big Book Catalog, Issue:68, Page:050

AR-15/M16 SS SERIES FREE-FLOAT HANDGUARDS MIDWEST INDUSTRIES, INC.

Quick View
$139.99 - $179.99
  (7)
    • Check Price
      • AR-15/M16 SS SERIES FREE-FLOAT HANDGUARDS MIDWEST INDUSTRIES, INC.

      • Ultra-Light, Clutter-Free Design With Modular Rails For Tactical Versatility Free-float handguard of lightweight yet rugged machined aluminum has a full-length MIL-STD 1913 Picatinny top rail and two, modular bolt-on rails for mounting tactical accessories exactly where you need them. Cuts down on weight and clutter by eliminating unused rail space. Plenty of large vent holes help air circulation to cool barrel, and also serve as mounting holes for the modular rails using the included hardware. Top rail mates with receiver rail without a gap for a monolithic look, and is T-marked with white numbering for ease in removing and remounting a scope or red dot sight without loss of zero. Generous internal clearance accommodates gas piston systems from CMMG, Osprey Defense, and Ares Defense (won’t fit Adams Arms). Accepts Midwest Industries T- and P-Series Trim Rings, available separately. AR-15, Issue:11, Page:052 Big Book Catalog, Issue:68, Page:050 New Product Supplement, Issue:631, Page:005

AR-15 MARK 7 12.7" NM SUPER MODULAR RAIL GEISSELE AUTOMATICS LLC

Quick View
$375.00
  (22)
    • Check Price
      • AR-15 MARK 7 12.7" NM SUPER MODULAR RAIL GEISSELE AUTOMATICS LLC

      • The Super Modular Rail MK7 is the first CMP-legal rail system that was designed specifically for National Match High Power Competition. The MK7 features a full quad rail, with the sling loop in its appropriate legal location for competition. The sling loop is attached to a steel bar which is fastened directly to the rail using screws to increase weight.

KINECT M-LOK QUICK DETACH PICATINNY RAIL SECTION KINETIC DEVELOPMENT GROUP LLC

Quick View
$49.99 - $59.99
  (75)
    • Check Price
      • KINECT M-LOK QUICK DETACH PICATINNY RAIL SECTION KINETIC DEVELOPMENT GROUP LLC

      • The Kinect™ by KDG for MLOK™ is a revolutionary QD mounting system that will change the way we attach accessories to our modular weapons platforms. Much like the Sidelok™ for Picatinny attachment, Kinect™ insures proper and easy installation, eliminating common variables that would cause issues.(ie: over tightening) Although revolutionary, Kinect™ is quite simple in its operation. There are two spring-loaded wedges in the base of the Kinect™ mounting point. When you press the accessory or rail section down in the MLOK™ slot, two tiny deployment triggers get pressed against the rail firing the wedges into place. There is nothing more frustrating that fiddling with an allen wrench (if you can find it) to get your accessories on an off your weapon with traditional modular rail sections. This changes the whole dynamic of the MLOK™ system and really makes every accessory truly removable with the ability to mount it in a second when needed.

AR-15/M16 NM FREE FLOAT BARREL SLEEVE ROCK RIVER ARMS

Quick View
$99.99
  (56)
    • Check Price
      • AR-15/M16 NM FREE FLOAT BARREL SLEEVE ROCK RIVER ARMS

      • DCM Legal, A2-Style Relieves Barrel Tension For Better Accuracy Two-piece steel tube isolates barrel from forend pressure for consistent accuracy on target and tactical rifles. Lets you use a tight shooting sling or a bipod without putting external pressure on barrel and shifting point of impact. Furnished with A2 handguards, sling swivel and gas tube. DCM legal, does not alter exterior profile. AR-15, Issue:11, Page:053 Big Book Catalog, Issue:68, Page:051 Mini-Catalogs, Issue:02, Page:009 New Product Supplement, Issue:525, Page:000

AR-15/M16 S.L.K. KEYMOD HANDGUARDS YANKEE HILL MACHINE CO., INC.

Quick View
$160.99 - $194.99
  (91)
    • Check Price
      • AR-15/M16 S.L.K. KEYMOD HANDGUARDS YANKEE HILL MACHINE CO., INC.

      • YHM is proud to offer the S.L.K. keymod handguard series. The keymod handguard has taken the AR industry by storm because of its simplistic accessory mounting, and because they are extremely lightweight. Similar in design to their SLR series of handguards, the S.L.K. is by far Yankee Hill Machines lightest handguard to date, but you can still add accessories throughout the entire rail handguard at the 3, 6, 9, and 12 o'clock positions. The S.L.K. line features a full-length picatinny top rail and keymod mounting system at the 3, 6 and 9 O'clock positions. Carbine Length weighs in at  6.7 Oz. Note: Weight includes barrel nut and mounting hardware Free-floating design Hardcoat Anodized matte black to Military Specifications or better Made from 6061-T6 aluminum The S.L.K. comes with all necessary tools for installation, including: S.L.K. Carbine Length Handguard (7.3") Barrel Nut Barrel Nut Wrench 4 screws (7/64ths Allen head) 7/64ths allen wrench  

AR-15/M16 CARBON FIBER HANDGUARD CLARK CUSTOM

Quick View
$102.99
  (56)
    • Check Price
      • AR-15/M16 CARBON FIBER HANDGUARD CLARK CUSTOM

      • Lightweight; Unique Appearance; Stays Cool One-piece tube with aluminum barrel nut eliminates barrel pressure points to improve accuracy. Lightweight and strong, carbon fiber tube with fron swivel stud won't absorb heat, so tube remains cool even after long strings of fire. Attractive and durable with a distinctive weave pattern that changes with the viewing angle. Requires installation of supplied, separate barrel nut and gluing of tube to nut with Elmer's Ultimate, Devcon High Strength, Gorilla Glue, or equivalent bonding agent. AR-15, Issue:11, Page:049 Big Book Catalog, Issue:68, Page:047 New Product Supplement, Issue:535, Page:000

AR-15/M16 XTM HAND STOP KIT MAGPUL

Quick View
$18.95
  (9)
    • Check Price
      • AR-15/M16 XTM HAND STOP KIT MAGPUL

      • The 4-piece XTM Hand Stop Kit serves as a lightweight, low-profile rail mounted index point for improved weapon control, or as a forward stop to prevent the shooter’s hand from reaching the hot front sight assembly or muzzle. The kit includes one Hand Stop, one index Panel, one full XTM Enhanced Panel, and one XTM Enhanced Half Panel. Available in Black, Flat Dark Earth or OD Green. AR-15, Issue:11, Page:055 Big Book Catalog, Issue:68, Page:053 Big Book Catalog, Issue:68, Page:331

M-LOK RAIL COVER TYPE 2 MAGPUL

Quick View
$12.30
  (33)
    • Check Price
      • M-LOK RAIL COVER TYPE 2 MAGPUL

      • M-LOK Type 2 Rail Covers are low-profile, two-piece covers that install directly onto M-LOK compatible systems. These M-LOK Covers are non-orientation specific which allow the user to mount them in any direction desired without affecting function. The contact surfaces on these covers are textured using the Magpul TSP texture for additional grip, adding slightly more than 1/8” from the mounting surface, these covers also feature a beveled contour to minimize potential snagging. The locking tab is pre-scored down the center to allow the user to snap off sections and mix and match colors for a more custom look. Includes six panels. Each covering one M-LOK slot.

AR-15/M16 ADD-ON RAILS YANKEE HILL MACHINE CO., INC.

Quick View
$17.20 - $31.70
  (53)
    • Check Price
      • AR-15/M16 ADD-ON RAILS YANKEE HILL MACHINE CO., INC.

      • Bolt-on Picatinny rails give you almost unlimited accessory mounting options for your Yankee Hill Customizable Free-Float Tube or Customizable Two-Piece Handguard. Choose only as much rail as you need to avoid cluttering handguard with unused rail space. 6" rail is a full-length rail for Carbine-length handguards, 9¼" rail is the correct length for Specter tubes, and 12" rail is full-length for Rifle tubes. AR-15, Issue:11, Page:054 Big Book Catalog, Issue:68, Page:052 Law Enforcement / Police Store, Issue:08, Page:012 New Product Supplement, Issue:602, Page:007